From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/12] OMAP3: Suffix all Micron memory timing parts with their speed
Date: Mon, 7 Nov 2011 13:05:42 -0700 [thread overview]
Message-ID: <1320696348-11664-7-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1320696348-11664-1-git-send-email-trini@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
---
arch/arm/include/asm/arch-omap3/mem.h | 54 +++++++++++++++++----------------
1 files changed, 28 insertions(+), 26 deletions(-)
diff --git a/arch/arm/include/asm/arch-omap3/mem.h b/arch/arm/include/asm/arch-omap3/mem.h
index 61baccb..a55553c 100644
--- a/arch/arm/include/asm/arch-omap3/mem.h
+++ b/arch/arm/include/asm/arch-omap3/mem.h
@@ -134,28 +134,30 @@ enum {
(MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \
(MICRON_TWTR_165 << 16))
-#define MICRON_RAMTYPE 0x1
-#define MICRON_DDRTYPE 0x0
-#define MICRON_DEEPPD 0x1
-#define MICRON_B32NOT16 0x1
-#define MICRON_BANKALLOCATION 0x2
-#define MICRON_RAMSIZE ((PHYS_SDRAM_1_SIZE/(1024*1024))/2)
-#define MICRON_ADDRMUXLEGACY 0x1
-#define MICRON_CASWIDTH 0x5
-#define MICRON_RASWIDTH 0x2
-#define MICRON_LOCKSTATUS 0x0
-#define MICRON_V_MCFG ((MICRON_LOCKSTATUS << 30) | (MICRON_RASWIDTH << 24) | \
- (MICRON_CASWIDTH << 20) | (MICRON_ADDRMUXLEGACY << 19) | \
- (MICRON_RAMSIZE << 8) | (MICRON_BANKALLOCATION << 6) | \
- (MICRON_B32NOT16 << 4) | (MICRON_DEEPPD << 3) | \
- (MICRON_DDRTYPE << 2) | (MICRON_RAMTYPE))
-
-#define MICRON_BL 0x2
-#define MICRON_SIL 0x0
-#define MICRON_CASL 0x3
-#define MICRON_WBST 0x0
-#define MICRON_V_MR ((MICRON_WBST << 9) | (MICRON_CASL << 4) | \
- (MICRON_SIL << 3) | (MICRON_BL))
+#define MICRON_RAMTYPE_165 0x1
+#define MICRON_DDRTYPE_165 0x0
+#define MICRON_DEEPPD_165 0x1
+#define MICRON_B32NOT16_165 0x1
+#define MICRON_BANKALLOCATION_165 0x2
+#define MICRON_RAMSIZE_165 ((PHYS_SDRAM_1_SIZE/(1024*1024))/2)
+#define MICRON_ADDRMUXLEGACY_165 0x1
+#define MICRON_CASWIDTH_165 0x5
+#define MICRON_RASWIDTH_165 0x2
+#define MICRON_LOCKSTATUS_165 0x0
+#define MICRON_V_MCFG_165 ((MICRON_LOCKSTATUS_165 << 30) | \
+ (MICRON_RASWIDTH_165 << 24) | (MICRON_CASWIDTH_165 << 20) | \
+ (MICRON_ADDRMUXLEGACY_165 << 19) | (MICRON_RAMSIZE_165 << 8) | \
+ (MICRON_BANKALLOCATION_165 << 6) | \
+ (MICRON_B32NOT16_165 << 4) | (MICRON_DEEPPD_165 << 3) | \
+ (MICRON_DDRTYPE_165 << 2) | (MICRON_RAMTYPE_165))
+
+#define MICRON_BL_165 0x2
+#define MICRON_SIL_165 0x0
+#define MICRON_CASL_165 0x3
+#define MICRON_WBST_165 0x0
+#define MICRON_V_MR_165 ((MICRON_WBST_165 << 9) | \
+ (MICRON_CASL_165 << 4) | (MICRON_SIL_165 << 3) | \
+ (MICRON_BL_165))
/*
* NUMONYX part of IGEP v2 (165MHz optimized) 6.06ns
@@ -202,11 +204,11 @@ enum {
#endif
#ifdef CONFIG_OMAP3_MICRON_DDR
-#define V_ACTIMA_165 MICRON_V_ACTIMA_165
-#define V_ACTIMB_165 MICRON_V_ACTIMB_165
-#define V_MCFG MICRON_V_MCFG
+#define V_ACTIMA_165 MICRON_V_ACTIMA_165
+#define V_ACTIMB_165 MICRON_V_ACTIMB_165
+#define V_MCFG MICRON_V_MCFG_165
#define V_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz
-#define V_MR MICRON_V_MR
+#define V_MR MICRON_V_MR_165
#endif
#ifdef CONFIG_OMAP3_NUMONYX_DDR
--
1.7.0.4
next prev parent reply other threads:[~2011-11-07 20:05 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-07 20:05 [U-Boot] [PATCH 0/12]: Add more framework to OMAP3 SPL, port more boards Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 01/12] OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 02/12] OMAP3: Add a helper function to set timings in SDRC Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 03/12] OMAP3: Change mem_ok to clear again after reading back Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 04/12] OMAP3: Remove get_mem_type prototype Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 05/12] OMAP3: Add optimal SDRC autorefresh control values Tom Rini
2011-11-07 20:05 ` Tom Rini [this message]
2011-11-07 20:05 ` [U-Boot] [PATCH 07/12] OMAP3 SPL: Rework memory initalization and devkit8000 support Tom Rini
2011-11-08 7:06 ` Igor Grinberg
2011-11-08 15:09 ` Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 08/12] OMAP3 SPL: Add identify_pop_memory function Tom Rini
2011-11-08 7:45 ` Igor Grinberg
2011-11-08 15:21 ` Tom Rini
2011-11-09 11:04 ` Igor Grinberg
2011-11-09 16:41 ` Tom Rini
2011-11-07 20:05 ` [U-Boot] [PATCH 09/12] OMAP3: Add SPL support to Beagleboard Tom Rini
2011-11-08 7:57 ` Igor Grinberg
2011-11-08 15:28 ` Tom Rini
2011-11-09 11:07 ` Igor Grinberg
2011-11-07 22:03 ` [U-Boot] [PATCH 10/12] OMAP3: Add SPL support to omap3_evm Tom Rini
2011-11-08 8:02 ` Igor Grinberg
2011-11-08 15:29 ` Tom Rini
2011-11-08 16:06 ` Tom Rini
2011-11-07 22:03 ` [U-Boot] [PATCH 11/12] AM3517: Add SPL support Tom Rini
2011-11-07 22:03 ` [U-Boot] [PATCH 12/12] AM3517 CraneBoard: " Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320696348-11664-7-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox