From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Tue, 15 Nov 2011 13:51:29 -0200 Subject: [U-Boot] [PATCH 1/5] mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Message-ID: <1321372293-3182-1-git-send-email-festevam@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Configure the pins as GPIO prior to using gpio_get_value. Cc: Jason Liu Signed-off-by: Fabio Estevam --- board/freescale/mx53loco/mx53loco.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index b4c7f33..5e5c38f 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -139,6 +139,9 @@ struct fsl_esdhc_cfg esdhc_cfg[2] = { int board_mmc_getcd(u8 *cd, struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; + + mxc_request_iomux(MX53_PIN_EIM_DA11, IOMUX_CONFIG_ALT1); + mxc_request_iomux(MX53_PIN_EIM_DA13, IOMUX_CONFIG_ALT1); if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) *cd = gpio_get_value(77); /*GPIO3_13*/ -- 1.7.1