From: Thomas Weber <weber@corscience.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCHv3 3/3] ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused
Date: Sat, 26 Nov 2011 21:30:57 +0100 [thread overview]
Message-ID: <1322339457-2199-4-git-send-email-weber@corscience.de> (raw)
In-Reply-To: <1322339457-2199-1-git-send-email-weber@corscience.de>
This patch removes the definition of stack sizes for
irq and fiq if the CONFIG_USE_IRQ is undefined before.
Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Thomas Weber <weber@corscience.de>
---
include/configs/am3517_crane.h | 4 ----
include/configs/am3517_evm.h | 4 ----
include/configs/apollon.h | 4 ----
include/configs/cm_t35.h | 4 ----
include/configs/devkit8000.h | 4 ----
include/configs/omap3_beagle.h | 4 ----
include/configs/omap3_evm_common.h | 5 -----
include/configs/omap3_mvblx.h | 4 ----
include/configs/omap3_overo.h | 4 ----
include/configs/omap3_pandora.h | 4 ----
include/configs/omap3_sdp3430.h | 4 ----
include/configs/omap3_zoom1.h | 4 ----
include/configs/omap3_zoom2.h | 4 ----
13 files changed, 0 insertions(+), 53 deletions(-)
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 25ce2da..0a62e36 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -264,10 +264,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 87dd00f..dfe186c 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -263,10 +263,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
index 46595d9..7fcf437 100644
--- a/include/configs/apollon.h
+++ b/include/configs/apollon.h
@@ -211,10 +211,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE SZ_128K /* regular stack */
-#ifdef CONFIG_USE_IRQ
-# define CONFIG_STACKSIZE_IRQ SZ_4K /* IRQ stack */
-# define CONFIG_STACKSIZE_FIQ SZ_4K /* FIQ stack */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 2cba7fd..a06a89d 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -283,10 +283,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index e27e282..3ea4532 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -275,10 +275,6 @@
/* The stack sizes are set up in start.S using the settings below */
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index c72b747..58efbfb 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -336,10 +336,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_evm_common.h b/include/configs/omap3_evm_common.h
index 810b8ae..aa6cea8 100644
--- a/include/configs/omap3_evm_common.h
+++ b/include/configs/omap3_evm_common.h
@@ -58,11 +58,6 @@
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
-
/*
* Physical Memory Map
* Note 1: CS1 may or may not be populated
diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h
index ccc67ae..63b2643 100644
--- a/include/configs/omap3_mvblx.h
+++ b/include/configs/omap3_mvblx.h
@@ -256,10 +256,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index 84cc76b..8c450b7 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -243,10 +243,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index f43f6f3..0a82648 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -227,10 +227,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index f67f47d..fdb87c7 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -303,10 +303,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
-#endif
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 6b514fc..8de7a67 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -258,10 +258,6 @@
* The stack sizes are set up in start.S using the settings below
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 2c0d4af..dff50fc 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -226,10 +226,6 @@
* The stack sizes are set up in start.S using these settings
*/
#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
-#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
-#endif
/*-----------------------------------------------------------------------
* Physical Memory Map
--
1.7.7.4
next prev parent reply other threads:[~2011-11-26 20:30 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-26 20:30 [U-Boot] [PATCHv3 0/3] Remove unused definitions from config files Thomas Weber
2011-11-26 20:30 ` [U-Boot] [PATCHv3 1/3] ARM: OMAP3: Remove unused define CONFIG_OMAP3430 Thomas Weber
2011-11-28 11:19 ` Luca Ceresoli
2011-11-26 20:30 ` [U-Boot] [PATCHv3 2/3] ARM: OMAP3: Remove unused define SDRC_R_C_B Thomas Weber
2011-11-28 11:21 ` Luca Ceresoli
2011-11-28 14:34 ` Tom Rini
2011-11-26 20:30 ` Thomas Weber [this message]
2011-11-28 11:25 ` [U-Boot] [PATCHv3 3/3] ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused Luca Ceresoli
2011-11-29 17:49 ` [U-Boot] [PATCHv3 0/3] Remove unused definitions from config files Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322339457-2199-4-git-send-email-weber@corscience.de \
--to=weber@corscience.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox