public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28
Date: Tue, 20 Dec 2011 11:53:29 -0200	[thread overview]
Message-ID: <1324389212-9208-1-git-send-email-festevam@gmail.com> (raw)

Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v5:
- Allow the MAC vendor to be overriden
Changes since v4:
- No changes
Change since v3:
- Add a note about the first two MAC addresses being from Freescale vendor.
 arch/arm/cpu/arm926ejs/mx28/mx28.c |   44 ++++++++++++++++++++++++++++++++++++
 board/denx/m28evk/m28evk.c         |   35 ----------------------------
 2 files changed, 44 insertions(+), 35 deletions(-)

diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 088c019..a25814e 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -214,6 +214,50 @@ int cpu_eth_init(bd_t *bis)
 }
 #endif
 
+static void __set_mac_vendor(char *mac)
+{
+	mac[0] = 0x00;
+	mac[1] = 0x04; /* Use FSL vendor MAC address by default */
+}
+
+void set_mac_vendor(char *mac)
+	__attribute__((weak, alias("__set_mac_vendor")));
+
+#ifdef	CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define	MXS_OCOTP_MAX_TIMEOUT	1000000
+
+void imx_get_mac_from_fuse(char *mac)
+{
+	struct mx28_ocotp_regs *ocotp_regs =
+		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+	uint32_t data;
+
+	memset(mac, 0, 6);
+
+	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+				MXS_OCOTP_MAX_TIMEOUT)) {
+		printf("MXS FEC: Can't get MAC from OCOTP\n");
+		return;
+	}
+
+	data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+	mac[2] = (data >> 24) & 0xff;
+	mac[3] = (data >> 16) & 0xff;
+	mac[4] = (data >> 8) & 0xff;
+	mac[5] = data & 0xff;
+	set_mac_vendor(mac);
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+	memset(mac, 0, 6);
+}
+#endif
+
 U_BOOT_CMD(
 	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
 	"display clocks",
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index fcee046..005446a 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
 	return ret;
 }
 
-#ifdef	CONFIG_M28_FEC_MAC_IN_OCOTP
-
-#define	MXS_OCOTP_MAX_TIMEOUT	1000000
-void imx_get_mac_from_fuse(char *mac)
-{
-	struct mx28_ocotp_regs *ocotp_regs =
-		(struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
-	uint32_t data;
-
-	memset(mac, 0, 6);
-
-	writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
-	if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
-				MXS_OCOTP_MAX_TIMEOUT)) {
-		printf("MXS FEC: Can't get MAC from OCOTP\n");
-		return;
-	}
-
-	data = readl(&ocotp_regs->hw_ocotp_cust0);
-
-	mac[0] = 0x00;
-	mac[1] = 0x04;
-	mac[2] = (data >> 24) & 0xff;
-	mac[3] = (data >> 16) & 0xff;
-	mac[4] = (data >> 8) & 0xff;
-	mac[5] = data & 0xff;
-}
-#else
-void imx_get_mac_from_fuse(char *mac)
-{
-	memset(mac, 0, 6);
-}
-#endif
-
 #endif
-- 
1.7.1

             reply	other threads:[~2011-12-20 13:53 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-20 13:53 Fabio Estevam [this message]
2011-12-20 13:53 ` [U-Boot] [PATCH v6 2/4] mx28: Allow to set MAC address for the two FECs Fabio Estevam
2011-12-20 13:57   ` Marek Vasut
2011-12-20 14:39   ` Stefano Babic
2011-12-20 13:53 ` [U-Boot] [PATCH v6 3/4] mx28: Let dram_init be common for mx28 Fabio Estevam
2011-12-20 13:57   ` Marek Vasut
2011-12-20 13:53 ` [U-Boot] [PATCH v6 4/4] mx28evk: Add initial support for MX28EVK board Fabio Estevam
2011-12-20 13:58   ` Marek Vasut
2011-12-28 12:20     ` Fabio Estevam
2011-12-28 12:36       ` Stefano Babic
2011-12-28 12:46         ` Fabio Estevam
2011-12-28 13:04           ` Fabio Estevam
2011-12-28 13:12           ` Stefano Babic
2011-12-28 12:37   ` Stefano Babic
2011-12-20 13:55 ` [U-Boot] [PATCH v6 1/4] mx28: Let imx_get_mac_from_fuse be common for mx28 Marek Vasut
2011-12-20 14:43   ` Veli-Pekka Peltola
2011-12-20 14:45     ` Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1324389212-9208-1-git-send-email-festevam@gmail.com \
    --to=festevam@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox