From: Fabio Estevam <festevam@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28
Date: Tue, 20 Dec 2011 13:46:32 -0200 [thread overview]
Message-ID: <1324395994-10786-2-git-send-email-festevam@gmail.com> (raw)
In-Reply-To: <1324395994-10786-1-git-send-email-festevam@gmail.com>
Let imx_get_mac_from_fuse function be a common function, so that other
mx28 boards can reuse it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v6:
- Let mac[5] be set inside mx28_adjust_mac
Changes since v5:
- Allow the MAC vendor to be overriden
Changes since v4:
- No changes
Change since v3:
- Add a note about the first two MAC addresses being from Freescale vendor.
arch/arm/cpu/arm926ejs/mx28/mx28.c | 46 ++++++++++++++++++++++++++++++++++++
board/denx/m28evk/m28evk.c | 35 ---------------------------
2 files changed, 46 insertions(+), 35 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
index 088c019..ee4e337 100644
--- a/arch/arm/cpu/arm926ejs/mx28/mx28.c
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -214,6 +214,52 @@ int cpu_eth_init(bd_t *bis)
}
#endif
+static void __mx28_adjust_mac(int dev_id, char *mac)
+{
+ mac[0] = 0x00;
+ mac[1] = 0x04; /* Use FSL vendor MAC address by default */
+
+ if (dev_id == 1) /* Let MAC1 be MAC0 + 1 by default */
+ mac[5] += 1;
+}
+
+void mx28_adjust_mac(int dev_id, char *mac)
+ __attribute__((weak, alias("__mx28_adjust_mac")));
+
+#ifdef CONFIG_MX28_FEC_MAC_IN_OCOTP
+
+#define MXS_OCOTP_MAX_TIMEOUT 1000000
+void imx_get_mac_from_fuse(int dev_id, char *mac)
+{
+ struct mx28_ocotp_regs *ocotp_regs =
+ (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+ uint32_t data;
+
+ memset(mac, 0, 6);
+
+ writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+ if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+ MXS_OCOTP_MAX_TIMEOUT)) {
+ printf("MXS FEC: Can't get MAC from OCOTP\n");
+ return;
+ }
+
+ data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+ mac[2] = (data >> 24) & 0xff;
+ mac[3] = (data >> 16) & 0xff;
+ mac[4] = (data >> 8) & 0xff;
+ mac[5] = data & 0xff;
+ mx28_adjust_mac(dev_id, mac);
+}
+#else
+void imx_get_mac_from_fuse(int dev_id, char *mac)
+{
+ memset(mac, 0, 6);
+}
+#endif
+
U_BOOT_CMD(
clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
"display clocks",
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index a0fabc0..005446a 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -178,39 +178,4 @@ int board_eth_init(bd_t *bis)
return ret;
}
-#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP
-
-#define MXS_OCOTP_MAX_TIMEOUT 1000000
-void imx_get_mac_from_fuse(int dev_id, char *mac)
-{
- struct mx28_ocotp_regs *ocotp_regs =
- (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
- uint32_t data;
-
- memset(mac, 0, 6);
-
- writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
-
- if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
- MXS_OCOTP_MAX_TIMEOUT)) {
- printf("MXS FEC: Can't get MAC from OCOTP\n");
- return;
- }
-
- data = readl(&ocotp_regs->hw_ocotp_cust0);
-
- mac[0] = 0x00;
- mac[1] = 0x04;
- mac[2] = (data >> 24) & 0xff;
- mac[3] = (data >> 16) & 0xff;
- mac[4] = (data >> 8) & 0xff;
- mac[5] = data & 0xff;
-}
-#else
-void imx_get_mac_from_fuse(int dev_id, char *mac)
-{
- memset(mac, 0, 6);
-}
-#endif
-
#endif
--
1.7.1
next prev parent reply other threads:[~2011-12-20 15:46 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-20 15:46 [U-Boot] [PATCH v7 1/4] net: imx: Add multi-FEC support for imx_get_mac_from_fuse Fabio Estevam
2011-12-20 15:46 ` Fabio Estevam [this message]
2011-12-20 16:31 ` [U-Boot] [PATCH v7 2/4] mx28: Let imx_get_mac_from_fuse be common for mx28 Marek Vasut
2011-12-20 16:42 ` [U-Boot] [PATCH v8 " Fabio Estevam
2011-12-20 17:15 ` Marek Vasut
2011-12-28 13:50 ` Stefano Babic
2011-12-28 13:51 ` [U-Boot] [PATCH v7 " Stefano Babic
2011-12-20 15:46 ` [U-Boot] [PATCH v7 3/4] mx28: Let dram_init " Fabio Estevam
2011-12-28 13:50 ` Stefano Babic
2011-12-20 15:46 ` [U-Boot] [PATCH v7 4/4] mx28evk: Add initial support for MX28EVK board Fabio Estevam
2011-12-28 13:50 ` [U-Boot] [PATCH v7 1/4] net: imx: Add multi-FEC support for imx_get_mac_from_fuse Stefano Babic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324395994-10786-2-git-send-email-festevam@gmail.com \
--to=festevam@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox