[U-Boot] [PATCH v2 3/4] zipitz2: use pxa_mmc_gen as MMC driver

[Vasily Khoruzhick <anarsoul@gmail.com>]

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
---
v2: mmcinfo is necessary to scan card for partitions

 board/zipitz2/zipitz2.c   |    8 ++++++++
 include/configs/zipitz2.h |    5 +++--
 2 files changed, 11 insertions(+), 2 deletions(-)

diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c
index b093c2f..4075fb6 100644
--- a/board/zipitz2/zipitz2.c
+++ b/board/zipitz2/zipitz2.c
@@ -79,6 +79,14 @@ void dram_init_banksize(void)
 	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
 }
 
+#ifdef	CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
 #ifdef	CONFIG_CMD_SPI
 
 struct {
diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h
index 75de677..1b14cc7 100644
--- a/include/configs/zipitz2.h
+++ b/include/configs/zipitz2.h
@@ -45,7 +45,7 @@
 #define	CONFIG_ARCH_CPU_INIT
 
 #define	CONFIG_BOOTCOMMAND						\
-	"if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then "	\
+	"if mmcinfo && ext2load mmc 0 0xa0000000 boot/uboot.script ; then "	\
 		"source 0xa0000000; "					\
 	"else "								\
 		"bootm 0x60000; "					\
@@ -91,7 +91,8 @@
  */
 #ifdef	CONFIG_CMD_MMC
 #define	CONFIG_MMC
-#define	CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define	CONFIG_SYS_MMC_BASE		0xF0000000
 #define	CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
-- 
1.7.8.3