[U-Boot] [PATCH 1/6] mxc_spi: move machine specifics into CPU headers

public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed

From: Eric Nelson <eric.nelson@boundarydevices.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/6] mxc_spi: move machine specifics into CPU headers
Date: Tue, 17 Jan 2012 15:09:45 -0700	[thread overview]
Message-ID: <1326838190-13746-2-git-send-email-eric.nelson@boundarydevices.com> (raw)
In-Reply-To: <1326838190-13746-1-git-send-email-eric.nelson@boundarydevices.com>

Move (E)CSPI register declarations into the imx-regs.h files for each supported CPU

Introduce two new macros to control conditional setup
     MXC_CSPI - Used for processors with the Configurable Serial Peripheral Interface (MX3x)
     MXC_ECSPI - For processors with Enhanced Configurable... (MX5x, MX6x)

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
---
 arch/arm/include/asm/arch-mx31/imx-regs.h |   27 ++++++++
 arch/arm/include/asm/arch-mx35/imx-regs.h |   25 ++++++++
 arch/arm/include/asm/arch-mx5/imx-regs.h  |   30 +++++++++
 drivers/spi/mxc_spi.c                     |   93 ++---------------------------
 4 files changed, 88 insertions(+), 87 deletions(-)

diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 6a517dd..70e3338 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -890,4 +890,31 @@ struct esdc_regs {
 #define MXC_EHCI_IPPUE_DOWN		(1 << 8)
 #define MXC_EHCI_IPPUE_UP		(1 << 9)
 
+/*
+ * CSPI register definitions
+ */
+#define MXC_CSPI
+#define MXC_CSPICTRL_EN		(1 << 0)
+#define MXC_CSPICTRL_MODE	(1 << 1)
+#define MXC_CSPICTRL_XCH	(1 << 2)
+#define MXC_CSPICTRL_SMC	(1 << 3)
+#define MXC_CSPICTRL_POL	(1 << 4)
+#define MXC_CSPICTRL_PHA	(1 << 5)
+#define MXC_CSPICTRL_SSCTL	(1 << 6)
+#define MXC_CSPICTRL_SSPOL	(1 << 7)
+#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 24)
+#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0x1f) << 8)
+#define MXC_CSPICTRL_DATARATE(x)	(((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC		(1 << 8)
+#define MXC_CSPICTRL_RXOVF	(1 << 6)
+#define MXC_CSPICTRL_MAXBITS	0x1f
+
+#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
+#define MAX_SPI_BYTES	4
+
+#define MXC_SPI_BASE_ADDRESSES \
+	0x43fa4000, \
+	0x50010000, \
+	0x53f84000,
+
 #endif /* __ASM_ARCH_MX31_IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h
index df74508..e570ad1 100644
--- a/arch/arm/include/asm/arch-mx35/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx35/imx-regs.h
@@ -179,6 +179,31 @@
 #define IPU_CONF_IC_EN		(1<<1)
 #define IPU_CONF_SCI_EN		(1<<0)
 
+/*
+ * CSPI register definitions
+ */
+#define MXC_CSPI
+#define MXC_CSPICTRL_EN		(1 << 0)
+#define MXC_CSPICTRL_MODE	(1 << 1)
+#define MXC_CSPICTRL_XCH	(1 << 2)
+#define MXC_CSPICTRL_SMC	(1 << 3)
+#define MXC_CSPICTRL_POL	(1 << 4)
+#define MXC_CSPICTRL_PHA	(1 << 5)
+#define MXC_CSPICTRL_SSCTL	(1 << 6)
+#define MXC_CSPICTRL_SSPOL	(1 << 7)
+#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_DATARATE(x)	(((x) & 0x7) << 16)
+#define MXC_CSPICTRL_TC		(1 << 7)
+#define MXC_CSPICTRL_RXOVF	(1 << 6)
+#define MXC_CSPICTRL_MAXBITS	0xfff
+#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
+#define MAX_SPI_BYTES	4
+
+#define MXC_SPI_BASE_ADDRESSES \
+	0x43fa4000, \
+	0x50010000,
+
 #define GPIO_PORT_NUM		3
 #define GPIO_NUM_PIN		32
 
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 0ee88d2..4fa6658 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -223,6 +223,36 @@
 #define CS0_32M_CS1_32M_CS2_32M_CS3_32M		3
 
 /*
+ * CSPI register definitions
+ */
+#define MXC_ECSPI
+#define MXC_CSPICTRL_EN		(1 << 0)
+#define MXC_CSPICTRL_MODE	(1 << 1)
+#define MXC_CSPICTRL_XCH	(1 << 2)
+#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
+#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
+#define MXC_CSPICTRL_PREDIV(x)	(((x) & 0xF) << 12)
+#define MXC_CSPICTRL_POSTDIV(x)	(((x) & 0xF) << 8)
+#define MXC_CSPICTRL_SELCHAN(x)	(((x) & 0x3) << 18)
+#define MXC_CSPICTRL_MAXBITS	0xfff
+#define MXC_CSPICTRL_TC		(1 << 7)
+#define MXC_CSPICTRL_RXOVF	(1 << 6)
+#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
+#define MAX_SPI_BYTES	32
+
+/* Bit position inside CTRL register to be associated with SS */
+#define MXC_CSPICTRL_CHAN	18
+
+/* Bit position inside CON register to be associated with SS */
+#define MXC_CSPICON_POL		4
+#define MXC_CSPICON_PHA		0
+#define MXC_CSPICON_SSPOL	12
+#define MXC_SPI_BASE_ADDRESSES \
+	CSPI1_BASE_ADDR, \
+	CSPI2_BASE_ADDR, \
+	CSPI3_BASE_ADDR,
+
+/*
  * Number of GPIO pins per port
  */
 #define GPIO_NUM_PIN            32
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 2fa7486..2e15318 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -33,93 +33,12 @@
 
 #error "i.MX27 CSPI not supported due to drastic differences in register definitions" \
 "See linux mxc_spi driver from Freescale for details."
-
-#elif defined(CONFIG_MX31)
-
-#define MXC_CSPICTRL_EN		(1 << 0)
-#define MXC_CSPICTRL_MODE	(1 << 1)
-#define MXC_CSPICTRL_XCH	(1 << 2)
-#define MXC_CSPICTRL_SMC	(1 << 3)
-#define MXC_CSPICTRL_POL	(1 << 4)
-#define MXC_CSPICTRL_PHA	(1 << 5)
-#define MXC_CSPICTRL_SSCTL	(1 << 6)
-#define MXC_CSPICTRL_SSPOL	(1 << 7)
-#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 24)
-#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0x1f) << 8)
-#define MXC_CSPICTRL_DATARATE(x)	(((x) & 0x7) << 16)
-#define MXC_CSPICTRL_TC		(1 << 8)
-#define MXC_CSPICTRL_RXOVF	(1 << 6)
-#define MXC_CSPICTRL_MAXBITS	0x1f
-
-#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
-#define MAX_SPI_BYTES	4
-
-static unsigned long spi_bases[] = {
-	0x43fa4000,
-	0x50010000,
-	0x53f84000,
-};
-
-#elif defined(CONFIG_MX51)
-
-#define MXC_CSPICTRL_EN		(1 << 0)
-#define MXC_CSPICTRL_MODE	(1 << 1)
-#define MXC_CSPICTRL_XCH	(1 << 2)
-#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_PREDIV(x)	(((x) & 0xF) << 12)
-#define MXC_CSPICTRL_POSTDIV(x)	(((x) & 0xF) << 8)
-#define MXC_CSPICTRL_SELCHAN(x)	(((x) & 0x3) << 18)
-#define MXC_CSPICTRL_MAXBITS	0xfff
-#define MXC_CSPICTRL_TC		(1 << 7)
-#define MXC_CSPICTRL_RXOVF	(1 << 6)
-
-#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
-#define MAX_SPI_BYTES	32
-
-/* Bit position inside CTRL register to be associated with SS */
-#define MXC_CSPICTRL_CHAN	18
-
-/* Bit position inside CON register to be associated with SS */
-#define MXC_CSPICON_POL		4
-#define MXC_CSPICON_PHA		0
-#define MXC_CSPICON_SSPOL	12
-
-static unsigned long spi_bases[] = {
-	CSPI1_BASE_ADDR,
-	CSPI2_BASE_ADDR,
-	CSPI3_BASE_ADDR,
-};
-
-#elif defined(CONFIG_MX35)
-
-#define MXC_CSPICTRL_EN		(1 << 0)
-#define MXC_CSPICTRL_MODE	(1 << 1)
-#define MXC_CSPICTRL_XCH	(1 << 2)
-#define MXC_CSPICTRL_SMC	(1 << 3)
-#define MXC_CSPICTRL_POL	(1 << 4)
-#define MXC_CSPICTRL_PHA	(1 << 5)
-#define MXC_CSPICTRL_SSCTL	(1 << 6)
-#define MXC_CSPICTRL_SSPOL	(1 << 7)
-#define MXC_CSPICTRL_CHIPSELECT(x)	(((x) & 0x3) << 12)
-#define MXC_CSPICTRL_BITCOUNT(x)	(((x) & 0xfff) << 20)
-#define MXC_CSPICTRL_DATARATE(x)	(((x) & 0x7) << 16)
-#define MXC_CSPICTRL_TC		(1 << 7)
-#define MXC_CSPICTRL_RXOVF	(1 << 6)
-#define MXC_CSPICTRL_MAXBITS	0xfff
-
-#define MXC_CSPIPERIOD_32KHZ	(1 << 15)
-#define MAX_SPI_BYTES	4
+#endif
 
 static unsigned long spi_bases[] = {
-	0x43fa4000,
-	0x50010000,
+	MXC_SPI_BASE_ADDRESSES
 };
 
-#else
-#error "Unsupported architecture"
-#endif
-
 #define OUT	MXC_GPIO_DIRECTION_OUT
 
 #define reg_read readl
@@ -129,7 +48,7 @@ struct mxc_spi_slave {
 	struct spi_slave slave;
 	unsigned long	base;
 	u32		ctrl_reg;
-#if defined(CONFIG_MX51)
+#if defined(MXC_ECSPI)
 	u32		cfg_reg;
 #endif
 	int		gpio;
@@ -167,7 +86,7 @@ u32 get_cspi_div(u32 div)
 	return i;
 }
 
-#if defined(CONFIG_MX31) || defined(CONFIG_MX35)
+#ifdef MXC_CSPI
 static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
 		unsigned int max_hz, unsigned int mode)
 {
@@ -204,7 +123,7 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
 }
 #endif
 
-#if defined(CONFIG_MX51)
+#ifdef MXC_ECSPI
 static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs,
 		unsigned int max_hz, unsigned int mode)
 {
@@ -316,7 +235,7 @@ int spi_xchg_single(struct spi_slave *slave, unsigned int bitlen,
 		MXC_CSPICTRL_BITCOUNT(bitlen - 1);
 
 	reg_write(&regs->ctrl, mxcs->ctrl_reg | MXC_CSPICTRL_EN);
-#ifdef CONFIG_MX51
+#ifdef MXC_ECSPI
 	reg_write(&regs->cfg, mxcs->cfg_reg);
 #endif
 
-- 
1.7.1

next prev parent reply	other threads:[~2012-01-17 22:09 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-01-17 22:09 [U-Boot] mxc_spi refactoring (for mx6q) Eric Nelson
2012-01-17 22:09 ` Eric Nelson [this message]
2012-01-17 22:09 ` [U-Boot] [PATCH 2/6] mx6q: Add support for ECSPI through mxc_spi driver Eric Nelson
2012-01-17 23:19   ` Marek Vasut
2012-01-18  0:36     ` Eric Nelson
2012-01-18  1:27       ` Marek Vasut
2012-01-18  1:44         ` Eric Nelson
2012-01-18  1:47           ` Marek Vasut
2012-01-18  2:02             ` Eric Nelson
2012-01-18  8:39           ` Stefano Babic
2012-01-18 16:08             ` Marek Vasut
2012-01-18 16:41               ` Stefano Babic
2012-01-18 20:05             ` Eric Nelson
2012-01-19 10:33               ` Stefano Babic
2012-01-17 22:09 ` [U-Boot] [PATCH 3/6] mx6q: mx6qsabrelite: Add ECSPI support to the Sabrelite platform Eric Nelson
2012-01-17 22:09 ` [U-Boot] [PATCH 4/6] sf command: allow default chip select through CONFIG_SPI_FLASH_CS Eric Nelson
2012-01-17 22:09 ` [U-Boot] [PATCH 5/6] mx6q: mx6qsabrelite: Provide default chip-select for serial flash Eric Nelson
2012-01-17 22:09 ` [U-Boot] [PATCH 6/6] mx6q: mx6qsabrelite: Provide defaults for placing environment in " Eric Nelson
2012-01-20  3:27   ` Jason Hui
2012-01-20  7:06     ` Dirk Behme
2012-01-20  7:48       ` Jason Hui
2012-01-20  8:47         ` Stefano Babic
2012-01-20 13:47           ` Eric Nelson
2012-01-20 13:43     ` Eric Nelson
2012-01-17 23:16 ` [U-Boot] mxc_spi refactoring (for mx6q) Marek Vasut
2012-01-18 11:51 ` Dirk Behme

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:6a517dd dfblob:70e3338 dfblob:df74508 dfblob:e570ad1
dfblob:0ee88d2 dfblob:4fa6658 dfblob:2fa7486 dfblob:2e15318 )
 OR (
bs:"[U-Boot] [PATCH 1/6] mxc_spi: move machine specifics into CPU headers" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1326838190-13746-2-git-send-email-eric.nelson@boundarydevices.com \
    --to=eric.nelson@boundarydevices.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox