[U-Boot] [PATCH 2/4] microblaze: Enable several ethernet driver compilation

[Stephan Linz <linz@li-pro.net>]

Note: this patch depends on commit "microblaze: Enable phylib and mii
support" (http://patchwork.ozlabs.org/patch/142957/)

br-
Stephan

Am Samstag, den 25.02.2012, 11:48 +0100 schrieb Stephan Linz: 
> U-Boot's multipple network supports enables to use
> several ethernet drivers but microblaze-generic
> platform config file select only one driver.
> 
> Reported-by: Michal Simek <monstr@monstr.eu>
> Signed-off-by: Stephan Linz <linz@li-pro.net>
> ---
>  include/configs/microblaze-generic.h |   11 ++++++-----
>  1 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
> index 9f66fbf..efca136 100644
> --- a/include/configs/microblaze-generic.h
> +++ b/include/configs/microblaze-generic.h
> @@ -65,11 +65,12 @@
>  
>  /* ethernet */
>  #undef CONFIG_SYS_ENET
> -#ifdef XILINX_EMACLITE_BASEADDR
> -# define CONFIG_XILINX_EMACLITE		1
> +#if defined(XILINX_EMACLITE_BASEADDR)
> +# define CONFIG_XILINX_EMACLITE	1
>  # define CONFIG_SYS_ENET
> -#elif XILINX_LLTEMAC_BASEADDR
> -# define CONFIG_XILINX_LL_TEMAC		1
> +#endif
> +#if defined(XILINX_LLTEMAC_BASEADDR)
> +# define CONFIG_XILINX_LL_TEMAC	1
>  # define CONFIG_SYS_ENET
>  #endif
>  #if defined(XILINX_AXIEMAC_BASEADDR)
> @@ -339,7 +340,7 @@
>  #define CONFIG_FIT		1
>  #define CONFIG_OF_LIBFDT	1
>  
> -#if defined(CONFIG_XILINX_AXIEMAC)
> +#if defined(CONFIG_XILINX_LL_TEMAC) || defined(CONFIG_XILINX_AXIEMAC)
>  # define CONFIG_MII		1
>  # define CONFIG_CMD_MII		1
>  # define CONFIG_PHY_GIGE	1

-- 
Viele Gr??e,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz