From: Marek Vasut <marex@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4 V2] Revert "i.MX28: Enable additional DRAM address bits"
Date: Thu, 3 May 2012 17:47:18 +0200 [thread overview]
Message-ID: <1336060041-8803-1-git-send-email-marex@denx.de> (raw)
This reverts commit 69d26d09de1cb93e0a09ca71d9f0d41a66f0756a.
Apparently, this commit got mainline only because of out-of-tree
port and causes breakage on board that is mainline. Revert.
Reason:
* The OOT board has 512MB of DRAM, enabling this additional address
line enabled it to work fine with 512MB of RAM.
* Every mainline port has max. 256MB of DRAM, therefore this revert
has no impact on any mainline port
* Though this caused a problem with new M28 board with 256MB of DRAM
where the chips are wired differently. The patch-to-be-reverted
caused the DRAM to behave like this:
[128MB chunk #1][128MB chunk #1 again][128MB chunk #2][128MB chunk #2 again]
Therefore to retain the current one-memory-init-rules-them-all situation,
revert this patch until another board emerges and will actually be pushed
mainline that needs different setup.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Detlev Zundel <dzu@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
---
arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
V2: Update description of the patch (thanks for pushing me to do better job,
Detlev!)
diff --git a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
index 4f62142..0d13537 100644
--- a/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mx28/spl_mem_init.c
@@ -39,7 +39,7 @@ uint32_t dram_vals[] = {
0x00000000, 0x00000100, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00000000, 0x00000000,
0x00000000, 0x00000000, 0x00010101, 0x01010101,
- 0x000f0f01, 0x0f02010a, 0x00000000, 0x00010101,
+ 0x000f0f01, 0x0f02020a, 0x00000000, 0x00010101,
0x00000100, 0x00000100, 0x00000000, 0x00000002,
0x01010000, 0x05060302, 0x06005003, 0x0a0000c8,
0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612,
--
1.7.10
next reply other threads:[~2012-05-03 15:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-03 15:47 Marek Vasut [this message]
2012-05-03 15:47 ` [U-Boot] [PATCH 2/4 RESEND] M28: Scan only first 512 MB of DRAM to avoid memory wraparound Marek Vasut
2012-05-03 15:47 ` [U-Boot] [PATCH 3/4 V2] i.MX28: Add delay after CPU bypass is cleared Marek Vasut
2012-05-04 9:20 ` Detlev Zundel
2012-05-04 11:13 ` Marek Vasut
2012-05-04 11:32 ` [U-Boot] [PATCH] " Marek Vasut
2012-05-06 16:38 ` Stefano Babic
2012-05-06 16:39 ` Marek Vasut
2012-05-07 9:49 ` Detlev Zundel
2012-05-06 16:28 ` [U-Boot] [PATCH 3/4 V2] " Stefano Babic
2012-05-06 16:30 ` Marek Vasut
2012-05-03 15:47 ` [U-Boot] [PATCH 4/4] M28: Enable FDT support Marek Vasut
2012-05-06 15:53 ` Stefano Babic
2012-05-06 16:12 ` Marek Vasut
2012-05-06 16:18 ` Stefano Babic
2012-05-06 16:41 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336060041-8803-1-git-send-email-marex@denx.de \
--to=marex@denx.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox