From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Date: Sat, 12 May 2012 15:16:46 -0300 Subject: [U-Boot] [PATCH] mx28evk: Fix PSWITCH key position Message-ID: <1336846606-27596-1-git-send-email-festevam@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Fix the position for PSWITCH key. The good benefit of doing this is that boot time is greatly reduced: from 5 seconds to less then 1 second. Signed-off-by: Fabio Estevam --- doc/README.mx28evk | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/doc/README.mx28evk b/doc/README.mx28evk index c6c3d37..571dfda 100644 --- a/doc/README.mx28evk +++ b/doc/README.mx28evk @@ -17,7 +17,7 @@ Jumper configuration To boot MX28EVK from an SD card, set the boot mode DIP switches as: * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) - * JTAG PSWITCH RESET: To the left (reset enabled) + * JTAG PSWITCH RESET: To the right (reset disabled) * Battery Source: Down * Wall 5V: Up * VDD 5V: To the left (off) -- 1.7.1