From: Manukumar <manukumar@signal-networks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] problem while making kernel up
Date: Wed, 30 May 2012 10:32:51 +0530 [thread overview]
Message-ID: <1338354171.2370.13.camel@Manukumar> (raw)
In-Reply-To: <4FBD0D43.1060208@freescale.com>
hello,
I was able to solve nand erase and nand write and saveenv.
Now,I am making kernel up and followed below steps..
1) tf 1000000 uImage_icm_v1.1
nand erase 0x00200000 361483
nand write 1000000 0x00200000 361483
2) tf c00000 p1021rdb_32b.dtb
nand erase 0x00100000 3000
nand write c00000 0x00100000 3000
3) tf 2000000 mini.rootfs.ext2.gz.uboot
nand erase 0x00600000 2115d4
nand write 2000000 0x00600000 2115d4
then to boot kernel from nand i used
bootm 0x00200000 0x00600000 0x00100000
it is giving below log message.
2168276 bytes written: OK
=> bootm 0x00200000 0x00600000 0x00100000
WARNING: adjusting available memory to 30000000
Wrong Image Format for bootm command
ERROR: can't get kernel image!
and also my next question is
cp.b 1000000 0x00200000 100000 not working it is showing log as:
=> cp.b 1000000 0x00200000 100000
Copy to Flash... Flash not Erased
why this is happenning please give me the solution for this.
manukumar
signal-networks
On Wed, 2012-05-23 at 11:16 -0500, Scott Wood wrote:
> On 05/23/2012 03:30 AM, Manukumar wrote:
> > Hello,
> > when we get rference board(P1020RDB) we got the u-boot-2010.12 source.
>
> That board is supported by current mainline U-Boot as well -- no patch
> needed.
>
> > by using above source we have modified according to custom boards
> > requirement.
> > can you please provide the link to get updated u-boot source that
> > support P1012 with nand flash samsung(K95608U0D)
> > or please provide me the patch...
>
> git.denx.de, or ftp://ftp.denx.de/pub/u-boot/u-boot-latest.tar.bz2
>
> -Scott
>
next prev parent reply other threads:[~2012-05-30 5:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1337677828.2382.30.camel@Manukumar>
2012-05-22 14:15 ` [U-Boot] Nand flash R/W,saveenv issue Marek Vasut
2012-05-22 17:56 ` Scott Wood
2012-05-23 5:56 ` Manukumar
2012-05-23 8:02 ` Wolfgang Denk
2012-05-23 8:30 ` Manukumar
2012-05-23 16:16 ` Scott Wood
2012-05-30 5:02 ` Manukumar [this message]
2012-05-30 16:18 ` [U-Boot] problem while making kernel up Scott Wood
2012-05-31 4:15 ` Manukumar
2012-05-31 16:21 ` Scott Wood
2012-06-01 3:58 ` Manukumar
2012-06-01 10:10 ` Manukumar
2012-06-01 17:15 ` Scott Wood
2012-06-06 8:13 ` Manukumar
2012-07-05 10:27 ` [U-Boot] USB detection Manukumar
2012-07-05 11:45 ` Albert ARIBAUD
2012-07-05 15:34 ` Marek Vasut
2012-07-09 8:47 ` Manukumar
2012-07-09 12:18 ` Albert ARIBAUD
2012-07-10 2:17 ` Marek Vasut
2012-07-12 6:10 ` Manukumar
2012-10-25 12:21 ` Manukumar
2012-10-25 13:26 ` RgC
2012-09-26 10:42 ` [U-Boot] bootm command in U-boot Manukumar
2012-09-26 14:14 ` Wolfgang Denk
2012-10-03 12:24 ` [U-Boot] Booting through nand flash with other address Manukumar
2012-10-03 15:22 ` Scott Wood
2012-10-04 10:18 ` Manukumar
2012-10-04 17:21 ` Scott Wood
2012-12-04 12:04 ` [U-Boot] access u-boot environment variables from kernel space Manukumar
2012-12-04 13:24 ` Yegor Yefremov
2012-12-04 16:26 ` Scott Wood
2012-12-04 16:35 ` Steve Strobel
2013-01-25 6:50 ` Manukumar
2013-01-25 9:22 ` Wolfgang Denk
2012-11-23 4:08 ` [U-Boot] Quer on JTAG Manukumar
2012-11-23 5:33 ` Wolfgang Denk
2012-09-11 12:47 ` [U-Boot] Nand Flash Programing and Board Bring Up Manukumar
2012-09-11 14:10 ` Marek Vasut
2012-05-23 22:45 ` [U-Boot] Nand flash R/W,saveenv issue Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338354171.2370.13.camel@Manukumar \
--to=manukumar@signal-networks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox