[U-Boot] [PATCH 1/2] tegra: add ULPI on USB2 funcmux entry

[Lucas Stach <dev@lynxeye.de>]

Hi Tom,
Am Donnerstag, den 31.05.2012, 08:47 -0700 schrieb Tom Warren:
> Lucas,
> 
> > -----Original Message-----
> > From: Lucas Stach [mailto:dev at lynxeye.de]
> > Sent: Thursday, May 31, 2012 4:51 AM
> > To: u-boot at lists.denx.de
> > Cc: Stephen Warren; Tom Warren
> > Subject: [PATCH 1/2] tegra: add ULPI on USB2 funcmux entry
> 
> This should be a [PATCH V2 1/2], if you are dropping the RAM size patch from the series (so I can keep track of which patches are the latest and should be applied to u-boot-tegra).  Please see the 'Patches' entry on the U-Boot wiki, specifically 'Sending updated patch versions'.
> 
Yes, I intend to drop the first patch, as my need to support multiple
RAM configurations with a single u-boot image is addressed by your patch
to load the ODMDATA from the BCT.
Though I still dislike this duplication of information between MC config
and ODMDATA, but I think it's a waste of time to argue about this, as it
is way above my head.

Sorry for not properly versioning those two patches, I'll do so in the
future.

Thanks,
Lucas