From: Manukumar <manukumar@signal-networks.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] problem while making kernel up
Date: Wed, 06 Jun 2012 13:43:52 +0530 [thread overview]
Message-ID: <1338970432.2365.2.camel@Manukumar> (raw)
In-Reply-To: <4FC8F89F.5080005@freescale.com>
Hello scott,
The issue is solved by making baud rate correction.
thank you
manukumar
signal-networks
On Fri, 2012-06-01 at 12:15 -0500, Scott Wood wrote:
> On 06/01/2012 05:10 AM, Manukumar wrote:
> > Hello scott.
> >
> > I can able make the kernel up but it hangs after probing
> > serial driver as shown below:
> >
> > It has to boot further but its not happenig..
> > I have attached the file i should get the log as this i also mentioned
> > where it hangs...
> >
> > what may be the problem with this how could i fix this issue.
>
> This is getting off topic for the U-Boot list. Plus, it looks like
> you're using a Freescale-provided kernel. Please e-mail
> support at freescale.com, or try the latest upstream kernel and get help
> from linuxppc-dev at lists.ozlabs.org.
>
> But in this case, since this is your custom board, and it works on the
> evaluation board, this is something you'll need to debug yourself (or
> hire someone to debug).
>
> Given the place where it hangs, the obvious suggestion is to make sure
> the baud rate and serial input clock are correct.
>
> -Scott
>
next prev parent reply other threads:[~2012-06-06 8:13 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1337677828.2382.30.camel@Manukumar>
2012-05-22 14:15 ` [U-Boot] Nand flash R/W,saveenv issue Marek Vasut
2012-05-22 17:56 ` Scott Wood
2012-05-23 5:56 ` Manukumar
2012-05-23 8:02 ` Wolfgang Denk
2012-05-23 8:30 ` Manukumar
2012-05-23 16:16 ` Scott Wood
2012-05-30 5:02 ` [U-Boot] problem while making kernel up Manukumar
2012-05-30 16:18 ` Scott Wood
2012-05-31 4:15 ` Manukumar
2012-05-31 16:21 ` Scott Wood
2012-06-01 3:58 ` Manukumar
2012-06-01 10:10 ` Manukumar
2012-06-01 17:15 ` Scott Wood
2012-06-06 8:13 ` Manukumar [this message]
2012-07-05 10:27 ` [U-Boot] USB detection Manukumar
2012-07-05 11:45 ` Albert ARIBAUD
2012-07-05 15:34 ` Marek Vasut
2012-07-09 8:47 ` Manukumar
2012-07-09 12:18 ` Albert ARIBAUD
2012-07-10 2:17 ` Marek Vasut
2012-07-12 6:10 ` Manukumar
2012-10-25 12:21 ` Manukumar
2012-10-25 13:26 ` RgC
2012-09-26 10:42 ` [U-Boot] bootm command in U-boot Manukumar
2012-09-26 14:14 ` Wolfgang Denk
2012-10-03 12:24 ` [U-Boot] Booting through nand flash with other address Manukumar
2012-10-03 15:22 ` Scott Wood
2012-10-04 10:18 ` Manukumar
2012-10-04 17:21 ` Scott Wood
2012-12-04 12:04 ` [U-Boot] access u-boot environment variables from kernel space Manukumar
2012-12-04 13:24 ` Yegor Yefremov
2012-12-04 16:26 ` Scott Wood
2012-12-04 16:35 ` Steve Strobel
2013-01-25 6:50 ` Manukumar
2013-01-25 9:22 ` Wolfgang Denk
2012-11-23 4:08 ` [U-Boot] Quer on JTAG Manukumar
2012-11-23 5:33 ` Wolfgang Denk
2012-09-11 12:47 ` [U-Boot] Nand Flash Programing and Board Bring Up Manukumar
2012-09-11 14:10 ` Marek Vasut
2012-05-23 22:45 ` [U-Boot] Nand flash R/W,saveenv issue Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338970432.2365.2.camel@Manukumar \
--to=manukumar@signal-networks.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox