[U-Boot] [PATCH 1/6] powerpc/corenet_ds: Update README.srio-boot-corenet

[Liu Gang <Gang.Liu@freescale.com>]

Hi Andy,

It's so long time those patches resided in open source, and there are no
any comments.

http://patchwork.ozlabs.org/patch/163499/

So could you please help to apply them?

Following are some descriptions for this set of patches excerpt from the
e-mail sent to you at June 1.

"
......

Now I finished the function based your comment and add the new module of
boot from PCIE.
Right now we just need to build master image for boot from SRIO and PCIE
with normal configuration, for example with:
		P4080DS_config
And then just need to set the environment "bootmaster" to "SRIO1' or
"PCIE1".

For slave image boot from SRIO and PCIE, just need one build target:
		P4080DS_SRIO_PCIE_BOOT_config

Overall, we now just need one special build configuration
		"P4080DS_SRIO_PCIE_BOOT_config"
for both boot from SRIO and PCIE.
......
"

Thanks a lot!


On Thu, 2012-06-07 at 14:43 +0800, Liu Gang wrote:
> Update some descriptions due to the implementation changes:
> 
> For master:
> 	Get rid of the SRIOBOOT_MASTER build target, and to support
> 	for serving as a SRIO boot master via environment variable.
> For slave:
> 	1. When compile the slave image for boot from SRIO, no longer
> 	   need to specify which SRIO port it will boot from.
> 	2. All slave's cores should be in hold off.
> 
> Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
> ---
>  doc/README.srio-boot-corenet |   70 ++++++++++++++++++++----------------------
>  1 files changed, 33 insertions(+), 37 deletions(-)