public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Stephan Linz <linz@li-pro.net>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup
Date: Tue, 07 Aug 2012 22:10:37 +0200	[thread overview]
Message-ID: <1344370238.29456.89.camel@keto> (raw)
In-Reply-To: <1344239199-11445-4-git-send-email-monstr@monstr.eu>

Am Montag, den 06.08.2012, 09:46 +0200 schrieb Michal Simek: 
> Just coding style cleanup.
> Remove unneeded externs.
> 
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> Acked-by: Simon Glass <sjg@chromium.org>
> 

Acked-by: Stephan Linz <linz@li-pro.net>

> --
> v2: Rebase - depends on previous intc patch
> ---
>  arch/microblaze/cpu/interrupts.c |   26 +++++++++++++-------------
>  1 files changed, 13 insertions(+), 13 deletions(-)
> 
> diff --git a/arch/microblaze/cpu/interrupts.c b/arch/microblaze/cpu/interrupts.c
> index 08f6bad..7f2ee64 100644
> --- a/arch/microblaze/cpu/interrupts.c
> +++ b/arch/microblaze/cpu/interrupts.c
> @@ -32,15 +32,12 @@
>  
>  #undef DEBUG_INT
>  
> -extern void microblaze_disable_interrupts (void);
> -extern void microblaze_enable_interrupts (void);
> -
> -void enable_interrupts (void)
> +void enable_interrupts(void)
>  {
>  	MSRSET(0x2);
>  }
>  
> -int disable_interrupts (void)
> +int disable_interrupts(void)
>  {
>  	unsigned int msr;
>  
> @@ -58,20 +55,21 @@ microblaze_intc_t *intc;
>  /* default handler */
>  static void def_hdlr(void)
>  {
> -	puts ("def_hdlr\n");
> +	puts("def_hdlr\n");
>  }
>  
>  static void enable_one_interrupt(int irq)
>  {
>  	int mask;
>  	int offset = 1;
> +
>  	offset <<= irq;
>  	mask = intc->ier;
>  	intc->ier = (mask | offset);
>  #ifdef DEBUG_INT
> -	printf ("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask,
> +	printf("Enable one interrupt irq %x - mask %x,ier %x\n", offset, mask,
>  		intc->ier);
> -	printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
> +	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
>  		intc->iar, intc->mer);
>  #endif
>  }
> @@ -80,13 +78,14 @@ static void disable_one_interrupt(int irq)
>  {
>  	int mask;
>  	int offset = 1;
> +
>  	offset <<= irq;
>  	mask = intc->ier;
>  	intc->ier = (mask & ~offset);
>  #ifdef DEBUG_INT
> -	printf ("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask,
> +	printf("Disable one interrupt irq %x - mask %x,ier %x\n", irq, mask,
>  		intc->ier);
> -	printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
> +	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
>  		intc->iar, intc->mer);
>  #endif
>  }
> @@ -94,9 +93,10 @@ static void disable_one_interrupt(int irq)
>  int install_interrupt_handler(int irq, interrupt_handler_t *hdlr, void *arg)
>  {
>  	struct irq_action *act;
> +
>  	/* irq out of range */
>  	if ((irq < 0) || (irq > irq_no)) {
> -		puts ("IRQ out of range\n");
> +		puts("IRQ out of range\n");
>  		return -1;
>  	}
>  	act = &vecs[irq];
> @@ -124,7 +124,7 @@ static void intc_init(void)
>  	/* XIntc_Start - hw_interrupt enable and all interrupt enable */
>  	intc->mer = 0x3;
>  #ifdef DEBUG_INT
> -	printf ("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
> +	printf("INTC isr %x, ier %x, iar %x, mer %x\n", intc->isr, intc->ier,
>  		intc->iar, intc->mer);
>  #endif
>  }
> @@ -159,7 +159,7 @@ int interrupts_init(void)
>  	return 0;
>  }
>  
> -void interrupt_handler (void)
> +void interrupt_handler(void)
>  {
>  	int irqs = intc->ivr;	/* find active interrupt */
>  	int mask = 1;

-- 
Viele Gr??e,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz

  reply	other threads:[~2012-08-07 20:10 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-06  7:46 [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration Michal Simek
2012-08-06  7:46 ` [U-Boot] [PATCH v2 2/7] microblaze: board: Remove compilation warning Michal Simek
2012-08-07 20:10   ` Stephan Linz
2012-08-06  7:46 ` [U-Boot] [PATCH v2 3/7] microblaze: intc: Registering interrupt should return value Michal Simek
2012-08-07 20:10   ` Stephan Linz
2012-08-08  8:27     ` Michal Simek
2012-08-08 17:47       ` Stephan Linz
2012-08-06  7:46 ` [U-Boot] [PATCH v2 4/7] microblaze: intc: Coding style cleanup Michal Simek
2012-08-07 20:10   ` Stephan Linz [this message]
2012-08-06  7:46 ` [U-Boot] [PATCH v2 5/7] microblaze: timer: Prepare for device-tree initialization Michal Simek
2012-08-07 20:10   ` Stephan Linz
2012-08-08  8:27     ` Michal Simek
2012-08-06  7:46 ` [U-Boot] [PATCH v2 6/7] microblaze: Clean microblaze initialization Michal Simek
2012-08-07 20:10   ` Stephan Linz
2012-08-06  7:46 ` [U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE Michal Simek
2012-08-07 20:10   ` Stephan Linz
2012-08-07 20:10 ` [U-Boot] [PATCH v2 1/7] microblaze: Add support for device tree driven board configuration Stephan Linz
2012-08-10  7:16   ` Michal Simek

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1344370238.29456.89.camel@keto \
    --to=linz@li-pro.net \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox