[U-Boot] [PATCH v2 7/7] microblaze: board: Use bi_flashstart instead of CONFIG_SYS_FLASH_BASE

[Stephan Linz <linz@li-pro.net>]

Am Montag, den 06.08.2012, 09:46 +0200 schrieb Michal Simek: 
> Prepare for device-tree driven configuration.
> 
> Signed-off-by: Michal Simek <monstr@monstr.eu>
> 

Acked-by: Stephan Linz <linz@li-pro.net>

Tested with AXI systems on Avnet S6LX150T and S6LX9 micro-evaluation.

> ---
> v2: Move bi_flashsize and bi_flashoffset from other patch
> ---
>  arch/microblaze/lib/board.c |   10 ++++++----
>  1 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
> index b450367..674b573 100644
> --- a/arch/microblaze/lib/board.c
> +++ b/arch/microblaze/lib/board.c
> @@ -136,9 +136,8 @@ void board_init_f(ulong not_used)
>  #if defined(CONFIG_CMD_FLASH)
>  	puts ("Flash: ");
>  	bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
> -	if (0 < (flash_size = flash_init ())) {
> -		bd->bi_flashsize = flash_size;
> -		bd->bi_flashoffset = CONFIG_SYS_FLASH_BASE + flash_size;
> +	flash_size = flash_init();
> +	if (bd->bi_flashstart && flash_size > 0) {
>  # ifdef CONFIG_SYS_FLASH_CHECKSUM
>  		print_size (flash_size, "");
>  		/*
> @@ -149,13 +148,16 @@ void board_init_f(ulong not_used)
>  		s = getenv ("flashchecksum");
>  		if (s && (*s == 'y')) {
>  			printf ("  CRC: %08X",
> -				crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)
> +				crc32(0, (const u8 *)bd->bi_flashstart,
> +							flash_size)
>  			);
>  		}
>  		putc ('\n');
>  # else	/* !CONFIG_SYS_FLASH_CHECKSUM */
>  		print_size (flash_size, "\n");
>  # endif /* CONFIG_SYS_FLASH_CHECKSUM */
> +		bd->bi_flashsize = flash_size;
> +		bd->bi_flashoffset = bd->bi_flashstart + flash_size;
>  	} else {
>  		puts ("Flash init FAILED");
>  		bd->bi_flashstart = 0;

-- 
Viele Gr??e,
Stephan Linz
______________________________________________________________________________
MB-Ref: http://www.li-pro.de/xilinx_mb:mbref:start
OpenDCC: http://www.li-pro.net/opendcc.phtml
PC/M: http://www.li-pro.net/pcm.phtml
Sourceforge: http://sourceforge.net/users/slz
Gitorious: https://gitorious.org/~slz