[U-Boot] [[Patch V2] mips: 06/16] add cpu/mips64/start.S

[Zhizhou Zhang <etou.zh@gmail.com>]

remove cache init
Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
---
 arch/mips/cpu/mips64/start.S |  373 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 373 insertions(+)
 create mode 100644 arch/mips/cpu/mips64/start.S

diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
new file mode 100644
index 0000000..375f0c7
--- /dev/null
+++ b/arch/mips/cpu/mips64/start.S
@@ -0,0 +1,373 @@
+/*
+ *  Startup Code for MIPS64 CPU-core
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any dlater version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICUdlaR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Pdlace, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+#ifndef CONFIG_SYS_MIPS_CACHE_MODE
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#endif
+
+	/*
+	 * For the moment disable interrupts, mark the kernel mode and
+	 * set ST0_KX so that the CPU does not spit fire when using
+	 * 64-bit addresses.
+	 */
+	.macro	setup_c0_status set clr
+	.set	push
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0 | \set | 0x1f | \clr
+	xor	t0, 0x1f | \clr
+	mtc0	t0, CP0_STATUS
+	.set	noreorder
+	sll	zero, 3				# ehb
+	.set	pop
+	.endm
+
+	.macro	setup_c0_status_reset
+#ifdef CONFIG_64BIT
+	setup_c0_status ST0_KX 0
+#else
+	setup_c0_status 0 0
+#endif
+	.endm
+
+#define RVECENT(f,n) \
+   b f; \
+   nop
+#define XVECENT(f,bev) \
+   b f     ;           \
+   li k0,bev
+
+	.set noreorder
+
+	.globl _start
+	.text
+_start:
+	RVECENT(reset,0)			# U-boot entry point
+	RVECENT(reset,1)			# software reboot
+	RVECENT(romReserved,2)
+	RVECENT(romReserved,3)
+	RVECENT(romReserved,4)
+	RVECENT(romReserved,5)
+	RVECENT(romReserved,6)
+	RVECENT(romReserved,7)
+	RVECENT(romReserved,8)
+	RVECENT(romReserved,9)
+	RVECENT(romReserved,10)
+	RVECENT(romReserved,11)
+	RVECENT(romReserved,12)
+	RVECENT(romReserved,13)
+	RVECENT(romReserved,14)
+	RVECENT(romReserved,15)
+	RVECENT(romReserved,16)
+	RVECENT(romReserved,17)
+	RVECENT(romReserved,18)
+	RVECENT(romReserved,19)
+	RVECENT(romReserved,20)
+	RVECENT(romReserved,21)
+	RVECENT(romReserved,22)
+	RVECENT(romReserved,23)
+	RVECENT(romReserved,24)
+	RVECENT(romReserved,25)
+	RVECENT(romReserved,26)
+	RVECENT(romReserved,27)
+	RVECENT(romReserved,28)
+	RVECENT(romReserved,29)
+	RVECENT(romReserved,30)
+	RVECENT(romReserved,31)
+	RVECENT(romReserved,32)
+	RVECENT(romReserved,33)
+	RVECENT(romReserved,34)
+	RVECENT(romReserved,35)
+	RVECENT(romReserved,36)
+	RVECENT(romReserved,37)
+	RVECENT(romReserved,38)
+	RVECENT(romReserved,39)
+	RVECENT(romReserved,40)
+	RVECENT(romReserved,41)
+	RVECENT(romReserved,42)
+	RVECENT(romReserved,43)
+	RVECENT(romReserved,44)
+	RVECENT(romReserved,45)
+	RVECENT(romReserved,46)
+	RVECENT(romReserved,47)
+	RVECENT(romReserved,48)
+	RVECENT(romReserved,49)
+	RVECENT(romReserved,50)
+	RVECENT(romReserved,51)
+	RVECENT(romReserved,52)
+	RVECENT(romReserved,53)
+	RVECENT(romReserved,54)
+	RVECENT(romReserved,55)
+	RVECENT(romReserved,56)
+	RVECENT(romReserved,57)
+	RVECENT(romReserved,58)
+	RVECENT(romReserved,59)
+	RVECENT(romReserved,60)
+	RVECENT(romReserved,61)
+	RVECENT(romReserved,62)
+	RVECENT(romReserved,63)
+	XVECENT(romExcHandle,0x200)	# bfc00200: R4000 tlbmiss vector
+	RVECENT(romReserved,65)
+	RVECENT(romReserved,66)
+	RVECENT(romReserved,67)
+	RVECENT(romReserved,68)
+	RVECENT(romReserved,69)
+	RVECENT(romReserved,70)
+	RVECENT(romReserved,71)
+	RVECENT(romReserved,72)
+	RVECENT(romReserved,73)
+	RVECENT(romReserved,74)
+	RVECENT(romReserved,75)
+	RVECENT(romReserved,76)
+	RVECENT(romReserved,77)
+	RVECENT(romReserved,78)
+	RVECENT(romReserved,79)
+	XVECENT(romExcHandle,0x280)	# bfc00280: R4000 xtlbmiss vector
+	RVECENT(romReserved,81)
+	RVECENT(romReserved,82)
+	RVECENT(romReserved,83)
+	RVECENT(romReserved,84)
+	RVECENT(romReserved,85)
+	RVECENT(romReserved,86)
+	RVECENT(romReserved,87)
+	RVECENT(romReserved,88)
+	RVECENT(romReserved,89)
+	RVECENT(romReserved,90)
+	RVECENT(romReserved,91)
+	RVECENT(romReserved,92)
+	RVECENT(romReserved,93)
+	RVECENT(romReserved,94)
+	RVECENT(romReserved,95)
+	XVECENT(romExcHandle,0x300)	# bfc00300: R4000 cache vector
+	RVECENT(romReserved,97)
+	RVECENT(romReserved,98)
+	RVECENT(romReserved,99)
+	RVECENT(romReserved,100)
+	RVECENT(romReserved,101)
+	RVECENT(romReserved,102)
+	RVECENT(romReserved,103)
+	RVECENT(romReserved,104)
+	RVECENT(romReserved,105)
+	RVECENT(romReserved,106)
+	RVECENT(romReserved,107)
+	RVECENT(romReserved,108)
+	RVECENT(romReserved,109)
+	RVECENT(romReserved,110)
+	RVECENT(romReserved,111)
+	XVECENT(romExcHandle,0x380)	# bfc00380: R4000 general vector
+	RVECENT(romReserved,113)
+	RVECENT(romReserved,114)
+	RVECENT(romReserved,115)
+	RVECENT(romReserved,116)
+	RVECENT(romReserved,116)
+	RVECENT(romReserved,118)
+	RVECENT(romReserved,119)
+	RVECENT(romReserved,120)
+	RVECENT(romReserved,121)
+	RVECENT(romReserved,122)
+	RVECENT(romReserved,123)
+	RVECENT(romReserved,124)
+	RVECENT(romReserved,125)
+	RVECENT(romReserved,126)
+	RVECENT(romReserved,127)
+
+	/*
+	 * We hope there are no more reserved vectors!
+	 * 128 * 8 == 1024 == 0x400
+	 * so this is address R_VEC+0x400 == 0xbfc00400
+	 */
+	.align 4
+reset:
+
+	/* Clear watch registers */
+	dmtc0	zero, CP0_WATCHLO
+	dmtc0	zero, CP0_WATCHHI
+
+	/* WP(Watch Pending), SW0/1 should be cleared */
+	mtc0	zero, CP0_CAUSE
+
+	setup_c0_status_reset
+
+	/* Init Timer */
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* CONFIG0 register */
+	li	t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/* Initialize $gp */
+	bal	1f
+	 nop
+	.dword	_gp
+1:
+	ld	gp, 0(ra)
+
+	dla	t9, cache_probe
+	jalr	t9
+	 nop
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* Initialize any external memory */
+	dla	t9, lowlevel_init
+	jalr	t9
+	 nop
+
+	/* ... and enable them */
+	li	t0, CONFIG_SYS_MIPS_CACHE_MODE
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/* Set up temporary stack */
+	li	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+	dla	sp, 0(t0)
+
+	dla	t9, board_init_f
+	jr	t9
+	 nop
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+	.globl	relocate_code
+	.ent	relocate_code
+relocate_code:
+	move	sp, a0			# set new stack pointer
+
+	li	t0, CONFIG_SYS_MONITOR_BASE
+	dla	t3, in_ram
+	ld	t2, -24(t3)		# t2 <-- uboot_end_data
+	move	t1, a2
+	move	s2, a2			# s2 <-- destination address
+
+	/*
+	 * Fix $gp:
+	 *
+	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 */
+	move	t8, gp
+	dsub	gp, CONFIG_SYS_MONITOR_BASE
+	dadd	gp, a2			# gp now adjusted
+	dsub	s1, gp, t8		# s1 <-- relocation offset
+
+	/*
+	 * t0 = source address
+	 * t1 = target address
+	 * t2 = source end address
+	 */
+
+	/*
+	 * Save destination address and size for dlater usage in flush_cache()
+	 */
+	move	s0, a1			# save gd in s0
+	move	a0, t1			# a0 <-- destination addr
+	dsub	a1, t2, t0		# a1 <-- size
+
+1:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	daddu	t0, 4
+	ble	t0, t2, 1b
+	 daddu	t1, 4
+
+	/* If caches were enabled, we would have to flush them here. */
+
+	/* a0 & a1 are already set up for flush_cache(start, size) */
+	dla	t9, flush_cache
+	jalr	t9
+	 nop
+
+	/* Jump to where we've relocated ourselves */
+	daddi	t0, s2, in_ram - _start
+	jr	t0
+	 nop
+
+	.dword	_gp
+	.dword	_GLOBAL_OFFSET_TABLE_
+	.dword	uboot_end_data
+	.dword	uboot_end
+	.dword	num_got_entries
+
+in_ram:
+	/*
+	 * Now we want to update GOT.
+	 *
+	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+	 * generated by GNU ld. Skip these reserved entries from relocation.
+	 */
+	ld	t3, -8(t0)		# t3 <-- num_got_entries
+	ld	t8, -32(t0)		# t8 <-- _GLOBAL_OFFSET_TABLE_
+	ld	t9, -40(t0)		# t9 <-- _gp
+	dsub	t8, t9			# compute offset
+	dadd	t8, t8, gp		# t8 now holds relocated _G_O_T_
+	daddi	t8, t8, 16		# skipping first two entries
+	li	t2, 2
+1:
+	ld	t1, 0(t8)
+	beqz	t1, 2f
+	 dadd	t1, s1
+	sd	t1, 0(t8)
+2:
+	daddi	t2, 1
+	blt	t2, t3, 1b
+	 daddi	t8, 8
+
+	/* Clear BSS */
+	ld	t1, -24(t0)		# t1 <-- uboot_end_data
+	ld	t2, -16(t0)		# t2 <-- uboot_end
+	dadd	t1, s1			# adjust pointers
+	dadd	t2, s1
+
+	dsub	t1, 8
+1:
+	daddi	t1, 8
+	bltl	t1, t2, 1b
+	 sd	zero, 0(t1)
+
+	move	a0, s0			# a0 <-- gd
+	dla	t9, board_init_r
+	jr	t9
+	 move	a1, s2
+
+	.end	relocate_code
+
+	/* Exception handlers */
+romReserved:
+	b	romReserved
+
+romExcHandle:
+	b	romExcHandle
-- 
1.7.9.5