From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 01/18] Makefile: Move SPL files to clobber, remove from clean
Date: Mon, 20 Aug 2012 09:45:36 -0700 [thread overview]
Message-ID: <1345481154-7050-2-git-send-email-trini@ti.com> (raw)
In-Reply-To: <1345481154-7050-1-git-send-email-trini@ti.com>
The 'clean' target has been removing all of spl but not u-boot itself.
For consistency and ease of testing, only remove SPL binaries / maps in
the clobber target, just like for full U-Boot
Signed-off-by: Tom Rini <trini@ti.com>
---
Makefile | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/Makefile b/Makefile
index 73c8e39..57bb0b9 100644
--- a/Makefile
+++ b/Makefile
@@ -763,12 +763,6 @@ clean:
@rm -f $(obj)lib/asm-offsets.s
@rm -f $(obj)include/generated/asm-offsets.h
@rm -f $(obj)$(CPUDIR)/$(SOC)/asm-offsets.s
- @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
- @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
- @rm -f $(ONENAND_BIN)
- @rm -f $(obj)onenand_ipl/u-boot.lds
- @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
- @rm -f $(obj)MLO
@rm -f $(TIMESTAMP_FILE) $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' -o -name '*.su' \
@@ -793,6 +787,12 @@ clobber: tidy
@rm -f $(obj)u-boot.dtb
@rm -f $(obj)u-boot.sb
@rm -f $(obj)u-boot.spr
+ @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
+ @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map}
+ @rm -f $(ONENAND_BIN)
+ @rm -f $(obj)onenand_ipl/u-boot.lds
+ @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+ @rm -f $(obj)MLO
@rm -f $(obj)tools/xway-swap-bytes
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c
--
1.7.9.5
next prev parent reply other threads:[~2012-08-20 16:45 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 16:45 [U-Boot] [PATCH v2 0/18] ARM: SPL: Make more generic, merge DaVinci and OMAP Tom Rini
2012-08-20 16:45 ` Tom Rini [this message]
2012-08-20 16:45 ` [U-Boot] [PATCH v2 02/18] spl_mmc: Make FAT checks / calls guarded with CONFIG_SPL_FAT_SUPPORT Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 03/18] omap-common: SPL: Add CONFIG_SPL_DISPLAY_PRINT / spl_display_print() Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 04/18] omap-common: Fix typo in save_boot_params() in lowlevel_init.S Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 05/18] ARM: SPL: Rename omap_boot_device to spl_boot_device Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 06/18] ARM: SPL: Rename omap_boot_mode to spl_boot_mode() Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 07/18] ARM: SPL: Remove NAND_MODE_HW_ECC from spl_nand.c Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 08/18] ARM: SPL: Only call mem_malloc_init if configured Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 09/18] ARM: SPL: Add <asm/spl.h> and <asm/arch/spl.h> Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 10/18] ARM: SPL: Make spl_mmc.c more generic Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 11/18] ARM: SPL: Clean up spl.c / spl_nand.c slightly Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 12/18] ARM: SPL: Start hooking in the current SPI SPL support Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 13/18] ARM: SPL: Move gpmc_init() to spl_board_init() Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 14/18] SPL: Move the omap SPL framework to common/spl Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 15/18] ARM: SPL: Convert davinci to CONFIG_SPL_FRAMEWORK Tom Rini
2012-08-22 10:04 ` Christian Riesch
2012-08-22 10:13 ` Prabhakar Lad
2012-08-22 17:46 ` Tom Rini
2012-08-22 19:19 ` Tom Rini
2012-08-22 23:14 ` Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 16/18] da850_am18xxevm: Add README.da850_am18xxevm Tom Rini
2012-08-21 5:09 ` Prabhakar Lad
2012-08-21 15:34 ` Tom Rini
2012-08-22 4:46 ` Prabhakar Lad
2012-08-22 6:28 ` Tom Rini
2012-08-22 8:13 ` Christian Riesch
2012-08-22 9:07 ` Prabhakar Lad
2012-08-22 9:17 ` Christian Riesch
2012-08-22 10:05 ` Prabhakar Lad
2012-08-22 15:09 ` Christian Riesch
2012-08-23 4:51 ` Prabhakar Lad
2012-08-22 17:44 ` Tom Rini
2012-08-22 17:37 ` Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 17/18] SPL: Enhance drivers/mtd/nand/nand_spl_load.c Tom Rini
2012-08-24 21:09 ` Scott Wood
2012-08-24 21:10 ` Scott Wood
2012-08-24 21:17 ` Tom Rini
2012-08-24 21:20 ` Tom Rini
2012-08-24 21:30 ` Scott Wood
2012-08-24 22:56 ` Tom Rini
2012-08-20 16:45 ` [U-Boot] [PATCH v2 18/18] SPL: Enhance spi_spl_load to match the other load functions Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1345481154-7050-2-git-send-email-trini@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox