From: Lucas Stach <dev@lynxeye.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] usb: do explicit unaligned accesses
Date: Fri, 31 Aug 2012 01:13:34 +0200 [thread overview]
Message-ID: <1346368414-993-1-git-send-email-dev@lynxeye.de> (raw)
usb_hub_descriptor has to be packed as it's used for
communication with the device. Member wHubCharacteristics
violates the natural alignment rules.
Use explicit unaligned access functions for this member.
Fixes ARMv7 traping while using USB.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
common/usb_hub.c | 14 +++++++++-----
drivers/usb/host/ehci-hcd.c | 7 +++++--
2 Dateien ge?ndert, 14 Zeilen hinzugef?gt(+), 7 Zeilen entfernt(-)
diff --git a/common/usb_hub.c b/common/usb_hub.c
index 53d939c..b8cd990 100644
--- a/common/usb_hub.c
+++ b/common/usb_hub.c
@@ -43,6 +43,7 @@
#include <common.h>
#include <command.h>
#include <asm/processor.h>
+#include <asm/unaligned.h>
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
@@ -269,6 +270,7 @@ static int usb_hub_configure(struct usb_device *dev)
int i;
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, USB_BUFSIZ);
unsigned char *bitmap;
+ short hubCharacteristics;
struct usb_hub_descriptor *descriptor;
struct usb_hub_device *hub;
#ifdef USB_HUB_DEBUG
@@ -304,8 +306,9 @@ static int usb_hub_configure(struct usb_device *dev)
}
memcpy((unsigned char *)&hub->desc, buffer, descriptor->bLength);
/* adjust 16bit values */
- hub->desc.wHubCharacteristics =
- le16_to_cpu(descriptor->wHubCharacteristics);
+ put_unaligned(le16_to_cpu(get_unaligned(
+ &descriptor->wHubCharacteristics)),
+ &descriptor->wHubCharacteristics);
/* set the bitmap */
bitmap = (unsigned char *)&hub->desc.DeviceRemovable[0];
/* devices not removable by default */
@@ -322,7 +325,8 @@ static int usb_hub_configure(struct usb_device *dev)
dev->maxchild = descriptor->bNbrPorts;
USB_HUB_PRINTF("%d ports detected\n", dev->maxchild);
- switch (hub->desc.wHubCharacteristics & HUB_CHAR_LPSM) {
+ hubCharacteristics = get_unaligned(&hub->desc.wHubCharacteristics);
+ switch (hubCharacteristics & HUB_CHAR_LPSM) {
case 0x00:
USB_HUB_PRINTF("ganged power switching\n");
break;
@@ -335,12 +339,12 @@ static int usb_hub_configure(struct usb_device *dev)
break;
}
- if (hub->desc.wHubCharacteristics & HUB_CHAR_COMPOUND)
+ if (hubCharacteristics & HUB_CHAR_COMPOUND)
USB_HUB_PRINTF("part of a compound device\n");
else
USB_HUB_PRINTF("standalone hub\n");
- switch (hub->desc.wHubCharacteristics & HUB_CHAR_OCPM) {
+ switch (hubCharacteristics & HUB_CHAR_OCPM) {
case 0x00:
USB_HUB_PRINTF("global over-current protection\n");
break;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index bfea192..d90e94d 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -22,6 +22,7 @@
*/
#include <common.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
#include <usb.h>
#include <asm/io.h>
#include <malloc.h>
@@ -876,10 +877,12 @@ int usb_lowlevel_init(int index, void **controller)
debug("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts);
/* Port Indicators */
if (HCS_INDICATOR(reg))
- descriptor.hub.wHubCharacteristics |= 0x80;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x80, &descriptor.hub.wHubCharacteristics);
/* Port Power Control */
if (HCS_PPC(reg))
- descriptor.hub.wHubCharacteristics |= 0x01;
+ put_unaligned(get_unaligned(&descriptor.hub.wHubCharacteristics)
+ | 0x01, &descriptor.hub.wHubCharacteristics);
/* Start the host controller. */
cmd = ehci_readl(&ehcic[index].hcor->or_usbcmd);
--
1.7.11.4
next reply other threads:[~2012-08-30 23:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-30 23:13 Lucas Stach [this message]
2012-08-30 23:29 ` [U-Boot] [PATCH] usb: do explicit unaligned accesses Marek Vasut
2012-08-31 6:08 ` Albert ARIBAUD
2012-08-31 16:15 ` Marek Vasut
[not found] ` <20120831222008.3665fecb@lilith>
2012-08-31 22:16 ` Marek Vasut
2012-09-01 7:12 ` Albert ARIBAUD
[not found] ` <20120901084509.230c7385@lilith>
2012-09-01 14:34 ` Marek Vasut
[not found] ` <20120901170132.7f5cbfb1@lilith>
2012-09-01 15:12 ` Marek Vasut
2012-09-01 16:28 ` Albert ARIBAUD
2012-09-01 16:39 ` Wolfgang Denk
2012-09-01 17:14 ` Marek Vasut
[not found] ` <593AEF6C47F46446852B067021A273D660BA94A5@MUCSE039.lantiq.com>
2012-08-31 9:00 ` Lucas Stach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346368414-993-1-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox