From: Lucas Stach <dev@lynxeye.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/4] USB multi controller
Date: Thu, 6 Sep 2012 01:12:49 +0200 [thread overview]
Message-ID: <1346886773-5693-1-git-send-email-dev@lynxeye.de> (raw)
V3: Stephen ran into some problems applying this, as it seems my tree
wasn't as clean as it should have been. Sorry for the inconvenience.
This should now be fixed.
Hi all,
this is a follow up on the patch "USB: EHCI: Initialize multiple
USB controllers at once" from Jim Lin. It takes some of the
code but has undergone some heavy reworking.
When we remove the ifdef horror from the above mentioned patch it's
mostly a big interface change to the usb subsystem. As this creates
a lot of churn I've split this up into a series. Every patch is self
contained so it doesn't break compiles and *should* not regress
any functionality on it's own. At least the series is bisectable in
case anything goes wrong. I've compile tested all the ARM configs.
Both the lowlevel usb and ehci interface change are backward
compatible, so implementations that only use one controller can
choose to ignore the new interface. All implementations are
updated to work with the new function prototypes.
For Tegra I've included a patch to actually use the new ehci
interface. Tom, Stephen, can I get an ACK from you for this, so
Marek can take this through his USB tree?
All patches now rebased onto u-boot-usb/master.
Patch 3 also includes some cosmetic changes, to make the output
of the usb commands more readable.
On my Colibri T20, with a total of 3 usb controllers of which 2
are enabled in the device tree, output now looks like this:
Tegra20 (Colibri) # usb start
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 2 USB Device(s) found
USB1: USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
USB2: lowlevel init failed
scanning usb for storage devices... 1 Storage Device(s) found
scanning usb for ethernet devices... 1 Ethernet Device(s) found
Tegra20 (Colibri) # usb tree
USB device tree:
1 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-2 Mass Storage (480 Mb/s, 200mA)
SanDisk U3 Titanium 2845221DC342AE8F
3 Hub (480 Mb/s, 0mA)
| u-boot EHCI Host Controller
|
+-4 Vendor specific (480 Mb/s, 4mA)
ASIX Elec. Corp. AX88772B 000001
Lucas Stach (4):
usb: lowlevel interface change to support multiple controllers
usb: ehci: rework to take advantage of new lowlevel interface
usb: add support for multiple usb controllers
tegra20: port to new ehci interface
arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c | 4 +-
arch/arm/cpu/armv7/tegra20/usb.c | 15 +---
arch/arm/include/asm/arch-tegra20/usb.h | 4 +-
arch/arm/include/asm/ehci-omap.h | 10 ++-
arch/mips/cpu/mips32/au1x00/au1x00_usb_ohci.c | 4 +-
arch/powerpc/cpu/mpc5xxx/usb_ohci.c | 4 +-
arch/powerpc/cpu/ppc4xx/usb_ohci.c | 4 +-
arch/sparc/cpu/leon3/usb_uhci.c | 4 +-
arch/sparc/lib/bootm.c | 2 +-
board/htkw/mcx/mcx.c | 6 +-
board/mpl/common/usb_uhci.c | 4 +-
board/technexion/twister/twister.c | 6 +-
board/teejet/mt_ventoux/mt_ventoux.c | 6 +-
board/ti/beagle/beagle.c | 6 +-
board/ti/panda/panda.c | 6 +-
common/cmd_usb.c | 16 +++-
common/usb.c | 108 +++++++++++-----------
common/usb_hub.c | 2 +-
common/usb_storage.c | 2 +-
drivers/usb/eth/usb_ether.c | 2 +-
drivers/usb/host/ehci-armada100.c | 15 ++--
drivers/usb/host/ehci-atmel.c | 11 ++-
drivers/usb/host/ehci-core.h | 29 ------
drivers/usb/host/ehci-exynos.c | 15 ++--
drivers/usb/host/ehci-fsl.c | 11 ++-
drivers/usb/host/ehci-hcd.c | 124 ++++++++++++++------------
drivers/usb/host/ehci-ixp4xx.c | 15 ++--
drivers/usb/host/ehci-marvell.c | 15 ++--
drivers/usb/host/ehci-mpc512x.c | 25 ++----
drivers/usb/host/ehci-mx5.c | 11 ++-
drivers/usb/host/ehci-mx6.c | 11 ++-
drivers/usb/host/ehci-mxc.c | 11 ++-
drivers/usb/host/ehci-mxs.c | 28 +++---
drivers/usb/host/ehci-omap.c | 10 ++-
drivers/usb/host/ehci-pci.c | 15 ++--
drivers/usb/host/ehci-ppc4xx.c | 11 ++-
drivers/usb/host/ehci-tegra.c | 14 ++-
drivers/usb/host/ehci-vct.c | 9 +-
drivers/usb/host/ehci.h | 4 +-
drivers/usb/host/isp116x-hcd.c | 4 +-
drivers/usb/host/ohci-hcd.c | 4 +-
drivers/usb/host/r8a66597-hcd.c | 4 +-
drivers/usb/host/sl811-hcd.c | 4 +-
drivers/usb/musb/musb_hcd.c | 4 +-
include/usb.h | 10 ++-
include/usb/mv_udc.h | 2 +-
46 Dateien ge?ndert, 311 Zeilen hinzugef?gt(+), 320 Zeilen entfernt(-)
delete mode 100644 drivers/usb/host/ehci-core.h
--
1.7.11.4
next reply other threads:[~2012-09-05 23:12 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-05 23:12 Lucas Stach [this message]
2012-09-05 23:12 ` [U-Boot] [PATCH v3 1/4] usb: lowlevel interface change to support multiple controllers Lucas Stach
2012-09-06 2:23 ` Marek Vasut
2012-09-05 23:12 ` [U-Boot] [PATCH v3 2/4] usb: ehci: rework to take advantage of new lowlevel interface Lucas Stach
2012-09-17 20:31 ` Marek Vasut
2012-09-05 23:12 ` [U-Boot] [PATCH v3 3/4] usb: add support for multiple usb controllers Lucas Stach
2012-09-05 23:12 ` [U-Boot] [PATCH v3 4/4] tegra20: port to new ehci interface Lucas Stach
2012-09-05 23:48 ` [U-Boot] [PATCH v3 0/4] USB multi controller Stephen Warren
2012-09-06 2:23 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346886773-5693-1-git-send-email-dev@lynxeye.de \
--to=dev@lynxeye.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox