[U-Boot] [PATCH v2] USB: musb_udc: Make musb_peri_rx_ep check for MUSB_RXCSR_RXPKTRDY

[Tom Rini <trini@ti.com>]

From: Pankaj Bharadiya <pankaj.bharadiya@ti.com>

The endpoint rx count register value will be zero if it is read before
receive packet ready bit (PERI_RXCSR:RXPKTRDY) is set.

Check for the receive packet ready bit (PERI_RXCSR:RXPKTRDY) before
reading endpoint rx count register. Proceed with rx count read and
FIFO read only if RXPKTRDY bit is set.

Signed-off-by: Pankaj Bharadiya <pankaj.bharadiya@ti.com>
Signed-off-by: Tom Rini <trini@ti.com>
---
 drivers/usb/musb/musb_udc.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
index 09cdec3..e0b4217 100644
--- a/drivers/usb/musb/musb_udc.c
+++ b/drivers/usb/musb/musb_udc.c
@@ -640,8 +640,17 @@ static void musb_peri_ep0(void)
 
 static void musb_peri_rx_ep(unsigned int ep)
 {
-	u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
+	u16 peri_rxcount;
+	u8 peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr);
 
+	if (!(peri_rxcsr & MUSB_RXCSR_RXPKTRDY)) {
+		if (debug_level > 0)
+			serial_printf("ERROR : %s %d without MUSB_RXCSR_RXPKTRDY set\n",
+				      __PRETTY_FUNCTION__, ep);
+		return;
+	}
+
+	peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
 	if (peri_rxcount) {
 		struct usb_endpoint_instance *endpoint;
 		u32 length;
-- 
1.7.9.5