[U-Boot] =?true?q?=5BPULL=5D=20please=20pull=20u-boot-atmel/master=20into=20u-boot-arm/master?=

Andreas Bießmann
2012-09-22T03:14:13Z

resent cause the old one didn't make its way into patchwork.

Dear Albert Aribaud,

as mentioned before there are some fixes left for this upcoming release, here
they are.

The following changes since commit 057df193b40d31799d41d43bc832a972f658bfe4:

Merge remote-tracking branch 'u-boot-ti/master' into m (2012-09-05 20:20:04 +0200)

are available in the git repository at:

git://git.denx.de/u-boot-atmel.git master

for you to fetch changes up to dc3e30bab7c5ef87bd24ebcbb7cdfc3fb2b44555:

Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel (2012-09-17 19:02:44 +0200)

----------------------------------------------------------------
Bo Shen (3):
spi: add atmel at25df321 serial flash support
spiflash: at25: using common spi flash operation
Atmel: sam9g10/9m10/9x5: Add support to boot DT kernel

Wu, Josh (2):
at91sam9x5: set default EBI I/O drive configuration.
atmel_nand: fix the U-Boot output information about nand flash with PMECC enable.

board/atmel/at91sam9x5ek/at91sam9x5ek.c | 4 ++++
drivers/mtd/nand/atmel_nand.c | 5 +++--
drivers/mtd/spi/atmel.c | 17 ++++++++++++++++-
include/configs/at91sam9261ek.h | 2 ++
include/configs/at91sam9m10g45ek.h | 2 ++
include/configs/at91sam9x5ek.h | 2 ++
6 files changed, 29 insertions(+), 3 deletions(-)

Best regards

Andreas Bie??mann