From mboxrd@z Thu Jan  1 00:00:00 1970
From: Manukumar <manukumar@signal-networks.com>
Date: Wed, 03 Oct 2012 17:54:35 +0530
Subject: [U-Boot] Booting through nand flash with other address
In-Reply-To: <1341823669.3686.30.camel@Manukumar>
References: <1337677828.2382.30.camel@Manukumar>
	<201205221615.07965.marex@denx.de> <4FBBD34F.5010501@freescale.com>
	<1337752596.2378.37.camel@Manukumar>
	<20120523080211.B633820025A@gemini.denx.de>
	<1337761847.2378.71.camel@Manukumar> <4FBD0D43.1060208@freescale.com>
	<1338354171.2370.13.camel@Manukumar> <4FC64859.2070609@freescale.com>
	<1338437711.2367.9.camel@Manukumar> <4FC79A7F.8050003@freescale.com>
	<1338545434.2370.11.camel@Manukumar> <4FC8F89F.5080005@freescale.com>
	<1341484069.3616.14.camel@Manukumar>
	<20120705134543.134da313@aari01-12>
	<1341823669.3686.30.camel@Manukumar>
Message-ID: <1349267075.9581.19.camel@Manukumar>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Dear all,

In u-boot(u-boot-2010.12) 
1) The TEXT_BASE address is 11001000.
2) Nand Flash Erasing at Address 0x00000000 
3) Nand Flash Writing u-boot-nand.bin at address 0x00000000 
4) When Power is switched On the booting happens.

till this there is no issue, now i want to change the 
booting address to different location(ex:0x02000000)
do i want to change the TEXT_BASE address accordingly 
to boot it from 0x02000000.
like below,
 
1) The TEXT_BASE address is 0x02000000.
2) Nand Flash Erasing at Address 0x02000000 
3) Nand Flash writing u-boot-nand.bin at address 0x02000000 .

if i do as above i cant boot from nand there is no boot log messages.

Please suggest me on How can i do to boot from different location

Manukumar
Signal-networks