From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Booting through nand flash with other address
Date: Wed, 3 Oct 2012 10:22:41 -0500 [thread overview]
Message-ID: <1349277761.31013.0@snotra> (raw)
In-Reply-To: <1349267075.9581.19.camel@Manukumar> (from manukumar@signal-networks.com on Wed Oct 3 07:24:35 2012)
On 10/03/2012 07:24:35 AM, Manukumar wrote:
> Dear all,
>
> In u-boot(u-boot-2010.12)
That's almost two years old. Please upgrade.
> 1) The TEXT_BASE address is 11001000.
Judging from this you seem to be using either P1010RDB or P1023RDS (or
maybe some out-of-tree board?). Always let us know what board you're
talking about.
> 2) Nand Flash Erasing at Address 0x00000000
> 3) Nand Flash Writing u-boot-nand.bin at address 0x00000000
> 4) When Power is switched On the booting happens.
>
> till this there is no issue, now i want to change the
> booting address to different location(ex:0x02000000)
Because you don't have as much RAM on this board, or some other reason?
> do i want to change the TEXT_BASE address accordingly
> to boot it from 0x02000000.
> like below,
>
> 1) The TEXT_BASE address is 0x02000000.
> 2) Nand Flash Erasing at Address 0x02000000
> 3) Nand Flash writing u-boot-nand.bin at address 0x02000000 .
Did you update other relevant variables such as
CONFIG_SYS_NAND_U_BOOT_DST and CONFIG_SYS_NAND_U_BOOT_START?
Plus you really should leave that 0x1000 offset in there. On mpc85xx
NAND boot, TEXT_BASE is 4K after the start of the image, since the boot
page comes first.
-Scott
next prev parent reply other threads:[~2012-10-03 15:22 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1337677828.2382.30.camel@Manukumar>
2012-05-22 14:15 ` [U-Boot] Nand flash R/W,saveenv issue Marek Vasut
2012-05-22 17:56 ` Scott Wood
2012-05-23 5:56 ` Manukumar
2012-05-23 8:02 ` Wolfgang Denk
2012-05-23 8:30 ` Manukumar
2012-05-23 16:16 ` Scott Wood
2012-05-30 5:02 ` [U-Boot] problem while making kernel up Manukumar
2012-05-30 16:18 ` Scott Wood
2012-05-31 4:15 ` Manukumar
2012-05-31 16:21 ` Scott Wood
2012-06-01 3:58 ` Manukumar
2012-06-01 10:10 ` Manukumar
2012-06-01 17:15 ` Scott Wood
2012-06-06 8:13 ` Manukumar
2012-07-05 10:27 ` [U-Boot] USB detection Manukumar
2012-07-05 11:45 ` Albert ARIBAUD
2012-07-05 15:34 ` Marek Vasut
2012-07-09 8:47 ` Manukumar
2012-07-09 12:18 ` Albert ARIBAUD
2012-07-10 2:17 ` Marek Vasut
2012-07-12 6:10 ` Manukumar
2012-10-25 12:21 ` Manukumar
2012-10-25 13:26 ` RgC
2012-09-26 10:42 ` [U-Boot] bootm command in U-boot Manukumar
2012-09-26 14:14 ` Wolfgang Denk
2012-10-03 12:24 ` [U-Boot] Booting through nand flash with other address Manukumar
2012-10-03 15:22 ` Scott Wood [this message]
2012-10-04 10:18 ` Manukumar
2012-10-04 17:21 ` Scott Wood
2012-12-04 12:04 ` [U-Boot] access u-boot environment variables from kernel space Manukumar
2012-12-04 13:24 ` Yegor Yefremov
2012-12-04 16:26 ` Scott Wood
2012-12-04 16:35 ` Steve Strobel
2013-01-25 6:50 ` Manukumar
2013-01-25 9:22 ` Wolfgang Denk
2012-11-23 4:08 ` [U-Boot] Quer on JTAG Manukumar
2012-11-23 5:33 ` Wolfgang Denk
2012-09-11 12:47 ` [U-Boot] Nand Flash Programing and Board Bring Up Manukumar
2012-09-11 14:10 ` Marek Vasut
2012-05-23 22:45 ` [U-Boot] Nand flash R/W,saveenv issue Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1349277761.31013.0@snotra \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox