* [U-Boot] u-boot on my board freescale P1010RDB is erased
@ 2012-10-10 12:26 randriamanjaka franky
2012-10-11 18:02 ` Scott Wood
0 siblings, 1 reply; 2+ messages in thread
From: randriamanjaka franky @ 2012-10-10 12:26 UTC (permalink / raw)
To: u-boot
Hi,
The u-boot on my board freescale P1010RDB is erased.There was a problem when i want to reflash it.
Is there a tool from freescale to put the first u-boot from nand on my board freescale P1010RDB ?
Thanks.
Best regards.
RANDRIAMANJAKA FRANKY
T?l. 0033634259173
^ permalink raw reply [flat|nested] 2+ messages in thread
* [U-Boot] u-boot on my board freescale P1010RDB is erased
2012-10-10 12:26 [U-Boot] u-boot on my board freescale P1010RDB is erased randriamanjaka franky
@ 2012-10-11 18:02 ` Scott Wood
0 siblings, 0 replies; 2+ messages in thread
From: Scott Wood @ 2012-10-11 18:02 UTC (permalink / raw)
To: u-boot
On 10/10/2012 07:26:50 AM, randriamanjaka franky wrote:
>
> Hi,
> The u-boot on my board freescale P1010RDB is erased.There was a
> problem when i want to reflash it.
>
> Is there a tool from freescale to put the first u-boot from nand on
> my board freescale P1010RDB ?
Is there a bootable image in NOR flash?
If not, you'll need some sort of JTAG. The Freescale tool would be one
of our JTAG devices plus CodeWarrior -- or you can use a third party
JTAG if it has support for this board. Depending on the tool, you may
have to first put an image into NOR flash rather than rewrite NAND
directly.
-Scott
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-10-11 18:02 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-10 12:26 [U-Boot] u-boot on my board freescale P1010RDB is erased randriamanjaka franky
2012-10-11 18:02 ` Scott Wood
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox