From: Jason Jin <Jason.jin@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] ColdFire: Fix build error for astro mcf53731 board.
Date: Thu, 18 Oct 2012 10:54:55 +0800 [thread overview]
Message-ID: <1350528896-19452-2-git-send-email-Jason.jin@freescale.com> (raw)
In-Reply-To: <1350528896-19452-1-git-send-email-Jason.jin@freescale.com>
Fix the build error by clean up the lds file.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
---
board/astro/mcf5373l/u-boot.lds | 64 +++++++--------------------------------
1 files changed, 11 insertions(+), 53 deletions(-)
diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds
index a1d8e0f..19342ac 100644
--- a/board/astro/mcf5373l/u-boot.lds
+++ b/board/astro/mcf5373l/u-boot.lds
@@ -22,51 +22,18 @@
*/
OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
+
SECTIONS
{
/* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
.text :
{
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- arch/m68k/cpu/mcf532x/start.o (.text)
- arch/m68k/lib/traps.o (.text)
- arch/m68k/lib/interrupts.o (.text)
- common/dlmalloc.o (.text)
- lib/zlib.o (.text)
+ arch/m68k/cpu/mcf532x/start.o (.text*)
. = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.text)
+ common/env_embedded.o (.text*)
- *(.text)
-/* *(.fixup)*/
- *(.got1)
+ *(.text*)
}
_etext = .;
PROVIDE (etext = .);
@@ -74,9 +41,6 @@ SECTIONS
{
*(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
}
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
/* Read-write section, merged into data segment: */
. = (. + 0x00FF) & 0xFFFFFF00;
@@ -86,24 +50,20 @@ SECTIONS
.reloc :
{
__got_start = .;
- *(.got)
+ KEEP(*(.got))
__got_end = .;
_GOT2_TABLE_ = .;
- *(.got2)
+ KEEP(*(.got2))
_FIXUP_TABLE_ = .;
- *(.fixup)
+ KEEP(*(.fixup))
}
__got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
__fixup_entries = (. - _FIXUP_TABLE_)>>2;
.data :
{
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
+ *(.data*)
+ *(.sdata*)
}
_edata = .;
PROVIDE (edata = .);
@@ -113,7 +73,6 @@ SECTIONS
.u_boot_cmd : { *(.u_boot_cmd) }
__u_boot_cmd_end = .;
-
. = .;
__start___ex_table = .;
__ex_table : { *(__ex_table) }
@@ -130,9 +89,8 @@ SECTIONS
.bss :
{
_sbss = .;
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
+ *(.sbss*)
+ *(.bss*)
*(COMMON)
. = ALIGN(4);
_ebss = .;
--
1.6.4
next prev parent reply other threads:[~2012-10-18 2:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-18 2:54 [U-Boot] [PATCH 0/2][RESEND] ColdFire: Fix the MAKEALL errors for some ColdFire boards Jason Jin
2012-10-18 2:54 ` Jason Jin [this message]
2012-10-18 2:54 ` [U-Boot] [PATCH 2/2] ColdFire: Fix the build error for Freescale m5282evb board Jason Jin
2012-10-18 16:42 ` [U-Boot] [PATCH 0/2][RESEND] ColdFire: Fix the MAKEALL errors for some ColdFire boards Tom Rini
-- strict thread matches above, loose matches on Subject: below --
2012-10-16 9:12 [U-Boot] [PATCH 0/2] " Jason Jin
2012-10-16 9:12 ` [U-Boot] [PATCH 1/2] ColdFire: Fix build error for astro mcf53731 board Jason Jin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350528896-19452-2-git-send-email-Jason.jin@freescale.com \
--to=jason.jin@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox