[U-Boot] [PATCH 5/8] tegra: usb: move controller init into start_port

[Lucas Stach <dev@lynxeye.de>]

There is no need to init a USB controller before the upper layers indicate
that they are actually going to use it.

board_usb_init now only parses the device tree and sets up the common pll.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/cpu/armv7/tegra20/usb.c | 47 +++++++++++++++-------------------------
 1 Datei ge?ndert, 18 Zeilen hinzugef?gt(+), 29 Zeilen entfernt(-)

diff --git a/arch/arm/cpu/armv7/tegra20/usb.c b/arch/arm/cpu/armv7/tegra20/usb.c
index cf800b1..e372b8b 100644
--- a/arch/arm/cpu/armv7/tegra20/usb.c
+++ b/arch/arm/cpu/armv7/tegra20/usb.c
@@ -417,44 +417,29 @@ static int init_ulpi_usb_controller(struct fdt_usb *config)
 }
 #endif
 
-/**
- * Add a new USB port to the list of available ports.
- *
- * @param config	USB port configuration
- * @return 0 if ok, -1 if error (too many ports)
- */
-static int add_port(struct fdt_usb *config)
+int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
 {
-	if (port_count == USB_PORTS_MAX) {
-		printf("tegrausb: Cannot register more than %d ports\n",
-		      USB_PORTS_MAX);
+	struct fdt_usb *config;
+	struct usb_ctlr *usbctlr;
+
+	if (portnum >= port_count)
 		return -1;
-	}
+
+	config = &port[portnum];
 
 	if (config->utmi && init_utmi_usb_controller(config)) {
-		printf("tegrausb: Cannot init port\n");
+		printf("tegrausb: Cannot init port %d\n", portnum);
 		return -1;
 	}
 
 	if (config->ulpi && init_ulpi_usb_controller(config)) {
-		printf("tegrausb: Cannot init port\n");
+		printf("tegrausb: Cannot init port %d\n", portnum);
 		return -1;
 	}
 
-	port[port_count++] = *config;
-
-	return 0;
-}
+	set_host_mode(config);
 
-int tegrausb_start_port(int portnum, u32 *hccr, u32 *hcor)
-{
-	struct usb_ctlr *usbctlr;
-
-	if (portnum >= port_count)
-		return -1;
-	set_host_mode(&port[portnum]);
-
-	usbctlr = port[portnum].reg;
+	usbctlr = config->reg;
 	*hccr = (u32)&usbctlr->cap_length;
 	*hcor = (u32)&usbctlr->usb_cmd;
 	return 0;
@@ -539,6 +524,12 @@ int board_usb_init(const void *blob)
 	count = fdtdec_find_aliases_for_id(blob, "usb",
 			COMPAT_NVIDIA_TEGRA20_USB, node_list, USB_PORTS_MAX);
 	for (i = 0; i < count; i++) {
+		if (port_count == USB_PORTS_MAX) {
+			printf("tegrausb: Cannot register more than %d ports\n",
+				USB_PORTS_MAX);
+			return -1;
+		}
+
 		debug("USB %d: ", i);
 		node = node_list[i];
 		if (!node)
@@ -549,9 +540,7 @@ int board_usb_init(const void *blob)
 			return -1;
 		}
 
-		if (add_port(&config))
-			return -1;
-		set_host_mode(&config);
+		port[port_count++] = config;
 	}
 
 	return 0;
-- 
1.7.11.7