[U-Boot-Users] help:error occured when 'saveenv'

[Verma <ubootusers@gmail.com>]

Hi Jack Xu,

When we want to write any data on to an address location of the flash
device,this address location should match with 
any sector starting address.

In your case,the flash address where you want the environment variables to
be copied,  does not seem to 
be the beginning address of any flash sector .

Verifying the address value where you want to write with the sector start
addresses  , might solve your problem.

Regards,
Verma.


xbc_5419 wrote:
> 
> hi,
> 
> i have been trying to port the u-boot 1.2.0 to my board which based on the
> at91rm9200.
> 
> when running the 'saveenv' ,it promted out 
> 
>        "Saving Environment to Flash...
>         Error: start address not on sector boundary"
> 
> my flash is MT-28F128J3, which has 128 128KB(x16bit) erase blocks,in the
> include/configs/myboard.h  i defined the 
>        #define PHYS_FLASH_1   0x10000000
>        #define PHYS_FLASH_SIZE   0x1000000  /* 16 megs main flash */
>        #define CFG_FLASH_BASE   PHYS_FLASH_1
>        #define CFG_MAX_FLASH_BANKS  1
>        #define CFG_MAX_FLASH_SECT  128
> 
>        #define CFG_ENV_IS_IN_FLASH  1
>        #ifdef CONFIG_SKIP_LOWLEVEL_INIT
>        #define CFG_ENV_ADDR   (PHYS_FLASH_1 + 0x60000)  /* after
> u-boot.bin */
>        #define CFG_ENV_SIZE   0x10000 /* sectors are 64K here */
>        #else
>        #define CFG_ENV_ADDR   (PHYS_FLASH_1 + 0xe000)  /* between boot.bin
> and u-boot.bin.gz */
>        #define CFG_ENV_SIZE   0x2000  /* 0x8000 */
>        #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
> 
> what can i do to fix it ...??
> Any help will be appreciated....thanks you...
> 
> 
> Best Regards
> 
> Jack Xu
> 2007-10-23
> 
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc.
> Still grepping through log files to find problems?  Stop.
> Now Search log events and configuration files using AJAX and a browser.
> Download your FREE copy of Splunk now >> http://get.splunk.com/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 
> 

-- 
View this message in context: http://www.nabble.com/help%3Aerror-occured-when-%27saveenv%27-tf4677078.html#a13523939
Sent from the Uboot - Users mailing list archive at Nabble.com.