From: Bob Liu <lliubbo@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH V3 00/12] Blackfin: add new processor and board
Date: Wed, 14 Nov 2012 18:24:34 +0800 [thread overview]
Message-ID: <1352888686-9868-1-git-send-email-lliubbo@gmail.com> (raw)
Blackfin bf60x is a new processor for blackfin.
This series patches add some basic support for it with a bf609-ezkit reference
board.
I got some suggestion in the former commit. Some of them are fixed, but some
is still not clear.
Since it's a long time ago, i send out V3 for feedback.
Bob Liu (7):
Blackfin: bf60x: new processor header files
Blackfin: bf60x: add dma support
Blackfin: bf60x: support big cplb page
Blackfin: bf60x: add gpio support
Blackfin: bf60x: core support
blackfin: bf609: add board support
Blackfin: bf60x: add hw watchdog support
Scott Jiang (1):
Blackfin: spi: add bf6xx spi driver
Sonic Zhang (3):
Blackfin: bf60x: add serial support
Blackfin: bf60x: add rsi/sdh support
Blackfin: bf609-ezkit: implement soft switch
Steven Miao (1):
Blackfin: Bf60x: add resume from hibernate
MAINTAINERS | 1 +
arch/blackfin/cpu/cpu.c | 4 +-
arch/blackfin/cpu/gpio.c | 36 +-
arch/blackfin/cpu/initcode.c | 365 +-
arch/blackfin/cpu/initcode.h | 52 +
arch/blackfin/cpu/reset.c | 6 +
arch/blackfin/cpu/serial.c | 81 +-
arch/blackfin/cpu/serial.h | 222 +-
arch/blackfin/cpu/serial1.h | 275 ++
arch/blackfin/cpu/serial4.h | 139 +
arch/blackfin/cpu/start.S | 2 +
arch/blackfin/include/asm/blackfin_cdef.h | 3 +
arch/blackfin/include/asm/blackfin_def.h | 5 +
arch/blackfin/include/asm/blackfin_local.h | 3 +
arch/blackfin/include/asm/config-pre.h | 4 +
arch/blackfin/include/asm/cplb.h | 17 +-
arch/blackfin/include/asm/dma.h | 113 +-
arch/blackfin/include/asm/gpio.h | 2 +-
arch/blackfin/include/asm/mach-bf609/BF609_cdef.h | 543 +++
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 3758 ++++++++++++++++++++
arch/blackfin/include/asm/mach-bf609/anomaly.h | 128 +
arch/blackfin/include/asm/mach-bf609/def_local.h | 5 +
arch/blackfin/include/asm/mach-bf609/gpio.h | 151 +
arch/blackfin/include/asm/mach-bf609/portmux.h | 257 ++
arch/blackfin/include/asm/mach-bf609/ports.h | 103 +
arch/blackfin/include/asm/mach-common/bits/cgu.h | 80 +
arch/blackfin/include/asm/mach-common/bits/dde.h | 88 +
arch/blackfin/include/asm/mach-common/bits/dma.h | 48 +-
arch/blackfin/include/asm/mach-common/bits/mpu.h | 6 +-
arch/blackfin/include/asm/mach-common/bits/pll.h | 5 +
arch/blackfin/include/asm/mach-common/bits/sdh.h | 38 +-
.../blackfin/include/asm/mach-common/bits/spi6xx.h | 240 ++
arch/blackfin/include/asm/mach-common/bits/uart4.h | 66 +
arch/blackfin/lib/board.c | 33 +-
arch/blackfin/lib/clocks.c | 113 +-
arch/blackfin/lib/string.c | 97 +-
board/bf609-ezkit/Makefile | 55 +
board/bf609-ezkit/bf609-ezkit.c | 67 +
board/bf609-ezkit/soft_switch.c | 169 +
board/bf609-ezkit/soft_switch.h | 71 +
boards.cfg | 1 +
common/cmd_reginfo.c | 19 +-
drivers/mmc/bfin_sdh.c | 68 +-
drivers/spi/Makefile | 1 +
drivers/spi/bfin_spi6xx.c | 308 ++
include/configs/bf609-ezkit.h | 175 +
include/configs/bfin_adi_common.h | 8 +-
47 files changed, 7611 insertions(+), 420 deletions(-)
create mode 100644 arch/blackfin/cpu/serial1.h
create mode 100644 arch/blackfin/cpu/serial4.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_cdef.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_def.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/anomaly.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/def_local.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/gpio.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/portmux.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/ports.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/cgu.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/dde.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/spi6xx.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/uart4.h
create mode 100644 board/bf609-ezkit/Makefile
create mode 100644 board/bf609-ezkit/bf609-ezkit.c
create mode 100644 board/bf609-ezkit/soft_switch.c
create mode 100644 board/bf609-ezkit/soft_switch.h
create mode 100644 drivers/spi/bfin_spi6xx.c
create mode 100644 include/configs/bf609-ezkit.h
--
1.7.9.5
next reply other threads:[~2012-11-14 10:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-14 10:24 Bob Liu [this message]
2012-11-14 10:24 ` [U-Boot] [PATCH V3 01/12] Blackfin: Bf60x: new processor header files Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 02/12] Blackfin: bf60x: add serial support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 03/12] Blackfin: bf60x: add dma support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 04/12] Blackfin: bf60x: support big cplb page Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 05/12] Blackfin: bf60x: add rsi/sdh support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 06/12] Blackfin: bf609-ezkit: implement soft switch Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 07/12] Blackfin: spi: add bf6xx spi driver Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 08/12] Blackfin: bf60x: add gpio support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 09/12] Blackfin: bf60x: core support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 10/12] blackfin: bf609: add board support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 11/12] Blackfin: bf60x: add hw watchdog support Bob Liu
2012-11-14 10:24 ` [U-Boot] [PATCH V3 12/12] Blackfin: bf60x: add resume from hibernate Bob Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352888686-9868-1-git-send-email-lliubbo@gmail.com \
--to=lliubbo@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox