[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com <manohar.betham@smartplayin.com>]

Dear Graeme,
 
Thank you!
 
I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
 
http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary
 
and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
cd u-boot-x86
opened the boards.config file and appended my board details in the config file .
 
MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
# Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
 
 
and then run the below commands and i didnot modify any code other than that above line.
.....................................................................................................................................
 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
/bin/bash: i386-linux-gcc: command not found
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make MIH61R-MB_config
Configuring for MIH61R-MB board...
ln: creating symbolic link `asm/arch': No such file or directory
make: *** [MIH61R-MB_config] Error 1
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$
...............................................................................................................................................................................................................................................................................................................................................
 
Please help me what are the files i need to modify and provide me the documentation.
 
Thank you!
Best Regards,
Manohar
8790215215
 
 
-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Friday, November 23, 2012 12:12pm
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Marek,
>  
> Thank you for the reply.
>  
> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.

I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
the standard GNU gcc package. There was an issue with the Makefile and
there was a need to manually create some toolchain symlinks, but the was
rectified some time ago. Are you using the latest mainline U-Boot from
git.denx.de? If so, what errors are you getting - please provide a copy of
your build output.

> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>  
> What are the config/code i need to change to make my pc as host & target are the same.

Are you planning on running U-Boot on an x86_64 machine? If so, you will
need to create code to support that - Current U-Boot only supports 32-bit
x86 targets. The sandbox target (designed for testing on a Linux host, not
for downloading onto a board) should run on an x86_64 host.

>  
> Please help us to build the u-boot on x86_64.

Please provide more detail - what have you tried? What was the result? The
build scripts should work as is on a properly configured x86_64 build machine

Regards,

Graeme

P.S. Please stop top posting - thanks

>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
> 
> 
> -----Original Message-----
> From: "Marek Vasut" <marex@denx.de>
> Sent: Friday, November 23, 2012 6:08am
> To: u-boot at lists.denx.de
> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Dear manohar.betham at smartplayin.com,
> 
>> Hi,
>>
>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>> 3.10GHz) using u-boot to work for TIZEN .
>>
>> As I am unable to configure/build my pc using u-boot-x86 .
>>
>> I request you please help me how to configure it/build the u-boot-x86 on my
>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>> host and target are the same.
>>
>> Please resolve the issue/is my PC support for the u-boot.
> 
> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
> ... u-boot doesn't support x86/64. Patches are welcome though.
> 
> Best regards,
> Marek Vasut
>