[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Hi,
 
I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz) using u-boot to work for TIZEN .
 
As I am unable to configure/build my pc using u-boot-x86 .
 
I request you please help me how to configure it/build the u-boot-x86 on my pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as host and target are the same.
 
Please resolve the issue/is my PC support for the u-boot.
 
Best Regards,
Manohar
8790215215
 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[Marek Vasut]

Dear manohar.betham at smartplayin.com,

> Hi,
> 
> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
> 3.10GHz) using u-boot to work for TIZEN .
> 
> As I am unable to configure/build my pc using u-boot-x86 .
> 
> I request you please help me how to configure it/build the u-boot-x86 on my
> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
> host and target are the same.
> 
> Please resolve the issue/is my PC support for the u-boot.

You need to compile it on a 32bit machine ... or install 32bit cross compiler 
... u-boot doesn't support x86/64. Patches are welcome though.

Best regards,
Marek Vasut

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear Marek,
 
Thank you for the reply.
 
Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
 
We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
 
What are the config/code i need to change to make my pc as host & target are the same.
 
Please help us to build the u-boot on x86_64.
 
Thank you!
Best Regards,
Manohar
8790215215
 


-----Original Message-----
From: "Marek Vasut" <marex@denx.de>
Sent: Friday, November 23, 2012 6:08am
To: u-boot at lists.denx.de
Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Dear manohar.betham at smartplayin.com,

> Hi,
> 
> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
> 3.10GHz) using u-boot to work for TIZEN .
> 
> As I am unable to configure/build my pc using u-boot-x86 .
> 
> I request you please help me how to configure it/build the u-boot-x86 on my
> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
> host and target are the same.
> 
> Please resolve the issue/is my PC support for the u-boot.

You need to compile it on a 32bit machine ... or install 32bit cross compiler 
... u-boot doesn't support x86/64. Patches are welcome though.

Best regards,
Marek Vasut

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[Graeme Russ]

Hi Manohar,

On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Marek,
>  
> Thank you for the reply.
>  
> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.

I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
the standard GNU gcc package. There was an issue with the Makefile and
there was a need to manually create some toolchain symlinks, but the was
rectified some time ago. Are you using the latest mainline U-Boot from
git.denx.de? If so, what errors are you getting - please provide a copy of
your build output.

> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>  
> What are the config/code i need to change to make my pc as host & target are the same.

Are you planning on running U-Boot on an x86_64 machine? If so, you will
need to create code to support that - Current U-Boot only supports 32-bit
x86 targets. The sandbox target (designed for testing on a Linux host, not
for downloading onto a board) should run on an x86_64 host.

>  
> Please help us to build the u-boot on x86_64.

Please provide more detail - what have you tried? What was the result? The
build scripts should work as is on a properly configured x86_64 build machine

Regards,

Graeme

P.S. Please stop top posting - thanks

>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
> 
> 
> -----Original Message-----
> From: "Marek Vasut" <marex@denx.de>
> Sent: Friday, November 23, 2012 6:08am
> To: u-boot at lists.denx.de
> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Dear manohar.betham at smartplayin.com,
> 
>> Hi,
>>
>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>> 3.10GHz) using u-boot to work for TIZEN .
>>
>> As I am unable to configure/build my pc using u-boot-x86 .
>>
>> I request you please help me how to configure it/build the u-boot-x86 on my
>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>> host and target are the same.
>>
>> Please resolve the issue/is my PC support for the u-boot.
> 
> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
> ... u-boot doesn't support x86/64. Patches are welcome though.
> 
> Best regards,
> Marek Vasut
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear Graeme,
 
Thank you!
 
I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
 
http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary
 
and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
cd u-boot-x86
opened the boards.config file and appended my board details in the config file .
 
MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
# Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
 
 
and then run the below commands and i didnot modify any code other than that above line.
.....................................................................................................................................
 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
/bin/bash: i386-linux-gcc: command not found
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
/bin/bash: i386-linux-gcc: command not found
basename: missing operand
Try `basename --help' for more information.
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make MIH61R-MB_config
Configuring for MIH61R-MB board...
ln: creating symbolic link `asm/arch': No such file or directory
make: *** [MIH61R-MB_config] Error 1
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$
...............................................................................................................................................................................................................................................................................................................................................
 
Please help me what are the files i need to modify and provide me the documentation.
 
Thank you!
Best Regards,
Manohar
8790215215
 
 
-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Friday, November 23, 2012 12:12pm
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Marek,
>  
> Thank you for the reply.
>  
> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.

I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
the standard GNU gcc package. There was an issue with the Makefile and
there was a need to manually create some toolchain symlinks, but the was
rectified some time ago. Are you using the latest mainline U-Boot from
git.denx.de? If so, what errors are you getting - please provide a copy of
your build output.

> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>  
> What are the config/code i need to change to make my pc as host & target are the same.

Are you planning on running U-Boot on an x86_64 machine? If so, you will
need to create code to support that - Current U-Boot only supports 32-bit
x86 targets. The sandbox target (designed for testing on a Linux host, not
for downloading onto a board) should run on an x86_64 host.

>  
> Please help us to build the u-boot on x86_64.

Please provide more detail - what have you tried? What was the result? The
build scripts should work as is on a properly configured x86_64 build machine

Regards,

Graeme

P.S. Please stop top posting - thanks

>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
> 
> 
> -----Original Message-----
> From: "Marek Vasut" <marex@denx.de>
> Sent: Friday, November 23, 2012 6:08am
> To: u-boot at lists.denx.de
> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Dear manohar.betham at smartplayin.com,
> 
>> Hi,
>>
>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>> 3.10GHz) using u-boot to work for TIZEN .
>>
>> As I am unable to configure/build my pc using u-boot-x86 .
>>
>> I request you please help me how to configure it/build the u-boot-x86 on my
>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>> host and target are the same.
>>
>> Please resolve the issue/is my PC support for the u-boot.
> 
> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
> ... u-boot doesn't support x86/64. Patches are welcome though.
> 
> Best regards,
> Marek Vasut
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[Graeme Russ]

Hi Manohar,

On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Graeme,
>  
> Thank you!
>  
> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>  
> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary

Depending on when you downloaded it, you may not have the latest mainline
which is at:

http://git.denx.de/?p=u-boot.git;a=summary

Nevertheless, you will have the latest x86 patches

>  
> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
> cd u-boot-x86

Hmm, I don't think U-Boot is what your after. There are a few problems you
will be faced with:
 - There is no ACPI support (no power management)
 - No System Management Mode (SMM) support
 - No chipset support (No RAM initialisation)
 - No Cache-As-RAM init code

Unless you have at least these covered, you will brick your board if you
try to flash U-Boot. You might instead take a look at coreboot

> opened the boards.config file and appended my board details in the config file .
>  
> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>  
>  
> and then run the below commands and i didnot modify any code other than that above line.
> .....................................................................................................................................
>  
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
> /bin/bash: i386-linux-gcc: command not found
> /bin/bash: i386-linux-gcc: command not found

[snip]

Ah, I now see that the patch I thought had been applied has not :(

You will need this patch:

http://patchwork.ozlabs.org/patch/155727/

Regards,

Graeme

> ...............................................................................................................................................................................................................................................................................................................................................
>  
> Please help me what are the files i need to modify and provide me the documentation.
>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
>  
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 12:12pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Marek,
>>  
>> Thank you for the reply.
>>  
>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
> 
> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
> the standard GNU gcc package. There was an issue with the Makefile and
> there was a need to manually create some toolchain symlinks, but the was
> rectified some time ago. Are you using the latest mainline U-Boot from
> git.denx.de? If so, what errors are you getting - please provide a copy of
> your build output.
> 
>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>  
>> What are the config/code i need to change to make my pc as host & target are the same.
> 
> Are you planning on running U-Boot on an x86_64 machine? If so, you will
> need to create code to support that - Current U-Boot only supports 32-bit
> x86 targets. The sandbox target (designed for testing on a Linux host, not
> for downloading onto a board) should run on an x86_64 host.
> 
>>  
>> Please help us to build the u-boot on x86_64.
> 
> Please provide more detail - what have you tried? What was the result? The
> build scripts should work as is on a properly configured x86_64 build machine
> 
> Regards,
> 
> Graeme
> 
> P.S. Please stop top posting - thanks
> 
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>
>>
>> -----Original Message-----
>> From: "Marek Vasut" <marex@denx.de>
>> Sent: Friday, November 23, 2012 6:08am
>> To: u-boot at lists.denx.de
>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Dear manohar.betham at smartplayin.com,
>>
>>> Hi,
>>>
>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>> 3.10GHz) using u-boot to work for TIZEN .
>>>
>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>
>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>> host and target are the same.
>>>
>>> Please resolve the issue/is my PC support for the u-boot.
>>
>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>
>> Best regards,
>> Marek Vasut
>>
> 
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear Graeme,
 
Thank you!
 
As of now I will try it for coreboot target on x86_64 machine.
 
I followed the steps given in patch file for x86 machine and modified and getting the below error.
 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$ make coreboot_config
make: *** No rule to make target `coreboot_config'.  Stop.
make: *** [coreboot_config] Error 1

Please help me to build u-boot for coreboot.
 
Happy Weekend!
Thank you!
Best Regards,
Manohar

8790215215


-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Friday, November 23, 2012 4:23pm
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Graeme,
>  
> Thank you!
>  
> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>  
> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary

Depending on when you downloaded it, you may not have the latest mainline
which is at:

http://git.denx.de/?p=u-boot.git;a=summary

Nevertheless, you will have the latest x86 patches

>  
> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
> cd u-boot-x86

Hmm, I don't think U-Boot is what your after. There are a few problems you
will be faced with:
 - There is no ACPI support (no power management)
 - No System Management Mode (SMM) support
 - No chipset support (No RAM initialisation)
 - No Cache-As-RAM init code

Unless you have at least these covered, you will brick your board if you
try to flash U-Boot. You might instead take a look at coreboot

> opened the boards.config file and appended my board details in the config file .
>  
> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>  
>  
> and then run the below commands and i didnot modify any code other than that above line.
> .....................................................................................................................................
>  
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
> /bin/bash: i386-linux-gcc: command not found
> /bin/bash: i386-linux-gcc: command not found

[snip]

Ah, I now see that the patch I thought had been applied has not :(

You will need this patch:

http://patchwork.ozlabs.org/patch/155727/

Regards,

Graeme

> ...............................................................................................................................................................................................................................................................................................................................................
>  
> Please help me what are the files i need to modify and provide me the documentation.
>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
>  
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 12:12pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Marek,
>>  
>> Thank you for the reply.
>>  
>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
> 
> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
> the standard GNU gcc package. There was an issue with the Makefile and
> there was a need to manually create some toolchain symlinks, but the was
> rectified some time ago. Are you using the latest mainline U-Boot from
> git.denx.de? If so, what errors are you getting - please provide a copy of
> your build output.
> 
>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>  
>> What are the config/code i need to change to make my pc as host & target are the same.
> 
> Are you planning on running U-Boot on an x86_64 machine? If so, you will
> need to create code to support that - Current U-Boot only supports 32-bit
> x86 targets. The sandbox target (designed for testing on a Linux host, not
> for downloading onto a board) should run on an x86_64 host.
> 
>>  
>> Please help us to build the u-boot on x86_64.
> 
> Please provide more detail - what have you tried? What was the result? The
> build scripts should work as is on a properly configured x86_64 build machine
> 
> Regards,
> 
> Graeme
> 
> P.S. Please stop top posting - thanks
> 
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>
>>
>> -----Original Message-----
>> From: "Marek Vasut" <marex@denx.de>
>> Sent: Friday, November 23, 2012 6:08am
>> To: u-boot at lists.denx.de
>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Dear manohar.betham at smartplayin.com,
>>
>>> Hi,
>>>
>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>> 3.10GHz) using u-boot to work for TIZEN .
>>>
>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>
>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>> host and target are the same.
>>>
>>> Please resolve the issue/is my PC support for the u-boot.
>>
>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>
>> Best regards,
>> Marek Vasut
>>
> 
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear Graeme,
 
I am getting the below error once after build with coreboot.Please help me.
..................................................only error part copied.....
ld.bfd  --emit-relocs -Bsymbolic -Bsymbolic-functions -m elf_i386 -r -o libserial.o  ns16550.o serial.o serial_ns16550.o
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/serial'
make -C drivers/spi/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/spi'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/spi'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/spi'
rm -f libspi.o; ar rcs libspi.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/spi'
make -C drivers/twserial/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/twserial'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/twserial'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/twserial'
rm -f libtws.o; ar rcs libtws.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/twserial'
make -C drivers/usb/eth/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/eth'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/eth'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/eth'
rm -f libusb_eth.o; ar rcs libusb_eth.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/eth'
make -C drivers/usb/gadget/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/gadget'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/gadget'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/gadget'
rm -f libusb_gadget.o; ar rcs libusb_gadget.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/gadget'
make -C drivers/usb/host/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/host'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/host'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/host'
rm -f libusb_host.o; ar rcs libusb_host.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/host'
make -C drivers/usb/musb/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/musb'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/musb'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/musb'
rm -f libusb_musb.o; ar rcs libusb_musb.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/musb'
make -C drivers/usb/phy/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/phy'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/phy'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/phy'
rm -f libusb_phy.o; ar rcs libusb_phy.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/phy'
make -C drivers/usb/ulpi/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/ulpi'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/ulpi'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/ulpi'
rm -f libusb_ulpi.o; ar rcs libusb_ulpi.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/usb/ulpi'
make -C drivers/video/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/video'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/video'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/video'
rm -f libvideo.o; ar rcs libvideo.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/video'
make -C drivers/watchdog/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/watchdog'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/watchdog'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/watchdog'
rm -f libwatchdog.o; ar rcs libwatchdog.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/drivers/watchdog'
make -C fs/cbfs/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cbfs'
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ cbfs.o cbfs.c >.depend.cbfs
cat /dev/null .depend.cbfs >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cbfs'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cbfs'
gcc  -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32 -Wall -Wstrict-prototypes -fno-stack-protector -Wno-format-nonliteral -Wno-format-security -fstack-usage     -o cbfs.o cbfs.c -c
ld.bfd  --emit-relocs -Bsymbolic -Bsymbolic-functions -m elf_i386 -r -o libcbfs.o  cbfs.o
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cbfs'
make -C fs/cramfs/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cramfs'
cat /dev/null  >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cramfs'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cramfs'
rm -f libcramfs.o; ar rcs libcramfs.o 
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/cramfs'
make -C fs/ext4/
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/ext4'
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ ext4fs.o ext4fs.c >.depend.ext4fs
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ ext4_common.o ext4_common.c >.depend.ext4_common
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ dev.o dev.c >.depend.dev
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ ext4_journal.o ext4_journal.c >.depend.ext4_journal
gcc -M -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32   -MQ crc16.o crc16.c >.depend.crc16
cat /dev/null .depend.ext4fs .depend.ext4_common .depend.dev .depend.ext4_journal .depend.crc16 >.depend
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/ext4'
make[1]: Entering directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/ext4'
gcc  -g  -Os   -ffunction-sections -fvisibility=hidden -D__KERNEL__ -DCONFIG_SYS_TEXT_BASE=0xFC0000 -I/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/include -fno-builtin -ffreestanding -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.6.1/include -pipe  -fno-strict-aliasing -Wstrict-prototypes -mregparm=3 -fomit-frame-pointer -ffreestanding -fno-toplevel-reorder -fno-stack-protector -mpreferred-stack-boundary=2 -fno-dwarf2-cfi-asm -DREALMODE_BASE=0x7c0 -DCONFIG_X86 -D__I386__ -march=i386 -Werror -m32 -Wall -Wstrict-prototypes -fno-stack-protector -Wno-format-nonliteral -Wno-format-security -fstack-usage     -o ext4fs.o ext4fs.c -c
ext4fs.c: In function ?ext4fs_write_file?:
ext4fs.c:933:6: error: variable ?delayed_skipfirst? set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors

make[1]: *** [ext4fs.o] Error 1
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/ext4'
make: *** [fs/ext4/libext4fs.o] Error 2
...........................
 
Thank you!
Best Regards,
Manohar
 


-----Original Message-----
From: manohar.betham@smartplayin.com
Sent: Friday, November 23, 2012 7:14pm
To: "Graeme Russ" <graeme.russ@gmail.com>
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



 
Dear Graeme,
 
Thank you!
 
As of now I will try it for coreboot target on x86_64 machine.
 
I followed the steps given in patch file for x86 machine and modified and getting the below error.
 
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$ make coreboot_config
make: *** No rule to make target `coreboot_config'.  Stop.
make: *** [coreboot_config] Error 1

Please help me to build u-boot for coreboot.
 
Happy Weekend!
Thank you!
Best Regards,
Manohar

 
8790215215


-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Friday, November 23, 2012 4:23pm
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Graeme,
>  
> Thank you!
>  
> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>  
> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary

Depending on when you downloaded it, you may not have the latest mainline
which is at:

http://git.denx.de/?p=u-boot.git;a=summary

Nevertheless, you will have the latest x86 patches

>  
> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
> cd u-boot-x86

Hmm, I don't think U-Boot is what your after. There are a few problems you
will be faced with:
 - There is no ACPI support (no power management)
 - No System Management Mode (SMM) support
 - No chipset support (No RAM initialisation)
 - No Cache-As-RAM init code

Unless you have at least these covered, you will brick your board if you
try to flash U-Boot. You might instead take a look at coreboot

> opened the boards.config file and appended my board details in the config file .
>  
> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>  
>  
> and then run the below commands and i didnot modify any code other than that above line.
> .....................................................................................................................................
>  
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
> /bin/bash: i386-linux-gcc: command not found
> /bin/bash: i386-linux-gcc: command not found

[snip]

Ah, I now see that the patch I thought had been applied has not :(

You will need this patch:

http://patchwork.ozlabs.org/patch/155727/

Regards,

Graeme

> ...............................................................................................................................................................................................................................................................................................................................................
>  
> Please help me what are the files i need to modify and provide me the documentation.
>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
>  
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 12:12pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Marek,
>>  
>> Thank you for the reply.
>>  
>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
> 
> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
> the standard GNU gcc package. There was an issue with the Makefile and
> there was a need to manually create some toolchain symlinks, but the was
> rectified some time ago. Are you using the latest mainline U-Boot from
> git.denx.de? If so, what errors are you getting - please provide a copy of
> your build output.
> 
>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>  
>> What are the config/code i need to change to make my pc as host & target are the same.
> 
> Are you planning on running U-Boot on an x86_64 machine? If so, you will
> need to create code to support that - Current U-Boot only supports 32-bit
> x86 targets. The sandbox target (designed for testing on a Linux host, not
> for downloading onto a board) should run on an x86_64 host.
> 
>>  
>> Please help us to build the u-boot on x86_64.
> 
> Please provide more detail - what have you tried? What was the result? The
> build scripts should work as is on a properly configured x86_64 build machine
> 
> Regards,
> 
> Graeme
> 
> P.S. Please stop top posting - thanks
> 
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>
>>
>> -----Original Message-----
>> From: "Marek Vasut" <marex@denx.de>
>> Sent: Friday, November 23, 2012 6:08am
>> To: u-boot at lists.denx.de
>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Dear manohar.betham at smartplayin.com,
>>
>>> Hi,
>>>
>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>> 3.10GHz) using u-boot to work for TIZEN .
>>>
>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>
>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>> host and target are the same.
>>>
>>> Please resolve the issue/is my PC support for the u-boot.
>>
>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>
>> Best regards,
>> Marek Vasut
>>
> 
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Hi,
 
I am getting the following error  after running make all for coreboot target,from /usr/bin/ld.bfd.real: skipping incompatible /home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/arch/x86/lib/libgcc.a when searching for -lgcc
/usr/bin/ld.bfd.real: cannot find -lgcc
make: *** [u-boot] Error 1
 
Please help me.
 
Best Regards,
Manohar
 


-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Friday, November 23, 2012 4:23pm
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
> 
> Dear Graeme,
>  
> Thank you!
>  
> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>  
> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary

Depending on when you downloaded it, you may not have the latest mainline
which is at:

http://git.denx.de/?p=u-boot.git;a=summary

Nevertheless, you will have the latest x86 patches

>  
> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
> cd u-boot-x86

Hmm, I don't think U-Boot is what your after. There are a few problems you
will be faced with:
 - There is no ACPI support (no power management)
 - No System Management Mode (SMM) support
 - No chipset support (No RAM initialisation)
 - No Cache-As-RAM init code

Unless you have at least these covered, you will brick your board if you
try to flash U-Boot. You might instead take a look at coreboot

> opened the boards.config file and appended my board details in the config file .
>  
> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>  
>  
> and then run the below commands and i didnot modify any code other than that above line.
> .....................................................................................................................................
>  
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
> /bin/bash: i386-linux-gcc: command not found
> /bin/bash: i386-linux-gcc: command not found

[snip]

Ah, I now see that the patch I thought had been applied has not :(

You will need this patch:

http://patchwork.ozlabs.org/patch/155727/

Regards,

Graeme

> ...............................................................................................................................................................................................................................................................................................................................................
>  
> Please help me what are the files i need to modify and provide me the documentation.
>  
> Thank you!
> Best Regards,
> Manohar
> 8790215215
>  
>  
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 12:12pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Marek,
>>  
>> Thank you for the reply.
>>  
>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
> 
> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
> the standard GNU gcc package. There was an issue with the Makefile and
> there was a need to manually create some toolchain symlinks, but the was
> rectified some time ago. Are you using the latest mainline U-Boot from
> git.denx.de? If so, what errors are you getting - please provide a copy of
> your build output.
> 
>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>  
>> What are the config/code i need to change to make my pc as host & target are the same.
> 
> Are you planning on running U-Boot on an x86_64 machine? If so, you will
> need to create code to support that - Current U-Boot only supports 32-bit
> x86 targets. The sandbox target (designed for testing on a Linux host, not
> for downloading onto a board) should run on an x86_64 host.
> 
>>  
>> Please help us to build the u-boot on x86_64.
> 
> Please provide more detail - what have you tried? What was the result? The
> build scripts should work as is on a properly configured x86_64 build machine
> 
> Regards,
> 
> Graeme
> 
> P.S. Please stop top posting - thanks
> 
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>
>>
>> -----Original Message-----
>> From: "Marek Vasut" <marex@denx.de>
>> Sent: Friday, November 23, 2012 6:08am
>> To: u-boot at lists.denx.de
>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Dear manohar.betham at smartplayin.com,
>>
>>> Hi,
>>>
>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>> 3.10GHz) using u-boot to work for TIZEN .
>>>
>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>
>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>> host and target are the same.
>>>
>>> Please resolve the issue/is my PC support for the u-boot.
>>
>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>
>> Best regards,
>> Marek Vasut
>>
> 
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[Graeme Russ]

Hi Manohar,

On 11/24/2012 06:08 PM, manohar.betham at smartplayin.com wrote:
> 
> Hi,
>  
> I am getting the following error  after running make all for coreboot target,from /usr/bin/ld.bfd.real: skipping incompatible /home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/arch/x86/lib/libgcc.a when searching for -lgcc
> /usr/bin/ld.bfd.real: cannot find -lgcc
> make: *** [u-boot] Error 1

What toolchain (and version) are you using? I've never seen ld.bfd.real before

Regards,

Graeme
>  
> Please help me.
>  
> Best Regards,
> Manohar
>  
> 
> 
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 4:23pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Graeme,
>>  
>> Thank you!
>>  
>> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>>  
>> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary
> 
> Depending on when you downloaded it, you may not have the latest mainline
> which is at:
> 
> http://git.denx.de/?p=u-boot.git;a=summary
> 
> Nevertheless, you will have the latest x86 patches
> 
>>  
>> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
>> cd u-boot-x86
> 
> Hmm, I don't think U-Boot is what your after. There are a few problems you
> will be faced with:
>  - There is no ACPI support (no power management)
>  - No System Management Mode (SMM) support
>  - No chipset support (No RAM initialisation)
>  - No Cache-As-RAM init code
> 
> Unless you have at least these covered, you will brick your board if you
> try to flash U-Boot. You might instead take a look at coreboot
> 
>> opened the boards.config file and appended my board details in the config file .
>>  
>> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
>> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>>  
>>  
>> and then run the below commands and i didnot modify any code other than that above line.
>> .....................................................................................................................................
>>  
>> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
>> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
>> /bin/bash: i386-linux-gcc: command not found
>> /bin/bash: i386-linux-gcc: command not found
> 
> [snip]
> 
> Ah, I now see that the patch I thought had been applied has not :(
> 
> You will need this patch:
> 
> http://patchwork.ozlabs.org/patch/155727/
> 
> Regards,
> 
> Graeme
> 
>> ...............................................................................................................................................................................................................................................................................................................................................
>>  
>> Please help me what are the files i need to modify and provide me the documentation.
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>  
>> -----Original Message-----
>> From: "Graeme Russ" <graeme.russ@gmail.com>
>> Sent: Friday, November 23, 2012 12:12pm
>> To: manohar.betham at smartplayin.com
>> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Hi Manohar,
>>
>> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>>
>>> Dear Marek,
>>>  
>>> Thank you for the reply.
>>>  
>>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
>>
>> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
>> the standard GNU gcc package. There was an issue with the Makefile and
>> there was a need to manually create some toolchain symlinks, but the was
>> rectified some time ago. Are you using the latest mainline U-Boot from
>> git.denx.de? If so, what errors are you getting - please provide a copy of
>> your build output.
>>
>>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>>  
>>> What are the config/code i need to change to make my pc as host & target are the same.
>>
>> Are you planning on running U-Boot on an x86_64 machine? If so, you will
>> need to create code to support that - Current U-Boot only supports 32-bit
>> x86 targets. The sandbox target (designed for testing on a Linux host, not
>> for downloading onto a board) should run on an x86_64 host.
>>
>>>  
>>> Please help us to build the u-boot on x86_64.
>>
>> Please provide more detail - what have you tried? What was the result? The
>> build scripts should work as is on a properly configured x86_64 build machine
>>
>> Regards,
>>
>> Graeme
>>
>> P.S. Please stop top posting - thanks
>>
>>>  
>>> Thank you!
>>> Best Regards,
>>> Manohar
>>> 8790215215
>>>  
>>>
>>>
>>> -----Original Message-----
>>> From: "Marek Vasut" <marex@denx.de>
>>> Sent: Friday, November 23, 2012 6:08am
>>> To: u-boot at lists.denx.de
>>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>>
>>>
>>>
>>> Dear manohar.betham at smartplayin.com,
>>>
>>>> Hi,
>>>>
>>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>>> 3.10GHz) using u-boot to work for TIZEN .
>>>>
>>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>>
>>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>>> host and target are the same.
>>>>
>>>> Please resolve the issue/is my PC support for the u-boot.
>>>
>>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>>
>>> Best regards,
>>> Marek Vasut
>>>
>>
>>
> 
> 

[U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen

[manohar.betham at smartplayin.com]

Hi Graeme,
 
Thank you!
 
I am compiling on x86_64 bit for coreboot-x86 32 bit target ,gcc compiler version is
(manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$ gcc -v
Using built-in specs.
COLLECT_GCC=/usr/bin/gcc-4.6.real
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-linux-gnu/4.6.1/lto-wrapper
Target: x86_64-linux-gnu
Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.1-9ubuntu3' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++,go --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-plugin --enable-objc-gc --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=x86_64-linux-gnu --host=x86_64-linux-gnu --target=x86_64-linux-gnu
Thread model: posix
gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) 
)
...
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$ ls /usr/bin/ld*
/usr/bin/ld  /usr/bin/ld.bfd  /usr/bin/ld.bfd.real  /usr/bin/ldd  /usr/bin/ld.gold  /usr/bin/ld.gold.real
manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/latest/u-boot$
 
Please let me know the soln.
 
Thank you!
Best Regards,
Manohar


-----Original Message-----
From: "Graeme Russ" <graeme.russ@gmail.com>
Sent: Sunday, November 25, 2012 7:52am
To: manohar.betham at smartplayin.com
Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen



Hi Manohar,

On 11/24/2012 06:08 PM, manohar.betham at smartplayin.com wrote:
> 
> Hi,
>  
> I am getting the following error  after running make all for coreboot target,from /usr/bin/ld.bfd.real: skipping incompatible /home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/arch/x86/lib/libgcc.a when searching for -lgcc
> /usr/bin/ld.bfd.real: cannot find -lgcc
> make: *** [u-boot] Error 1

What toolchain (and version) are you using? I've never seen ld.bfd.real before

Regards,

Graeme
>  
> Please help me.
>  
> Best Regards,
> Manohar
>  
> 
> 
> -----Original Message-----
> From: "Graeme Russ" <graeme.russ@gmail.com>
> Sent: Friday, November 23, 2012 4:23pm
> To: manohar.betham at smartplayin.com
> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
> 
> 
> 
> Hi Manohar,
> 
> On 11/23/2012 09:10 PM, manohar.betham at smartplayin.com wrote:
>>
>> Dear Graeme,
>>  
>> Thank you!
>>  
>> I downloaded the u-boot-x86 on Ubuntu 11.10 loaded(Linux smart-OptiPlex-390 3.0.0-26-generic  x86_64 GNU/Linux) intel i5 M1H61R-MB montherboard from the given below link.
>>  
>> http://git.denx.de/?p=u-boot/u-boot-x86.git;a=summary
> 
> Depending on when you downloaded it, you may not have the latest mainline
> which is at:
> 
> http://git.denx.de/?p=u-boot.git;a=summary
> 
> Nevertheless, you will have the latest x86 patches
> 
>>  
>> and yes I am planning to run u-boot on x86_64 machine and my target is also x86_64 machine are the same .
>> cd u-boot-x86
> 
> Hmm, I don't think U-Boot is what your after. There are a few problems you
> will be faced with:
>  - There is no ACPI support (no power management)
>  - No System Management Mode (SMM) support
>  - No chipset support (No RAM initialisation)
>  - No Cache-As-RAM init code
> 
> Unless you have at least these covered, you will brick your board if you
> try to flash U-Boot. You might instead take a look at coreboot
> 
>> opened the boards.config file and appended my board details in the config file .
>>  
>> MIH61R-MB                    x86         x86        MIH61R-MB            GenuineIntel           -
>> # Target                     ARCH        CPU         Board name          Vendor                    SoC         Options
>>  
>>  
>> and then run the below commands and i didnot modify any code other than that above line.
>> .....................................................................................................................................
>>  
>> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ vim boards.cfg 
>> manoharb at smart-OptiPlex-390:~/Kernel_Tizen/intel_tizen/u-boot-x86$ make distclean
>> /bin/bash: i386-linux-gcc: command not found
>> /bin/bash: i386-linux-gcc: command not found
> 
> [snip]
> 
> Ah, I now see that the patch I thought had been applied has not :(
> 
> You will need this patch:
> 
> http://patchwork.ozlabs.org/patch/155727/
> 
> Regards,
> 
> Graeme
> 
>> ...............................................................................................................................................................................................................................................................................................................................................
>>  
>> Please help me what are the files i need to modify and provide me the documentation.
>>  
>> Thank you!
>> Best Regards,
>> Manohar
>> 8790215215
>>  
>>  
>> -----Original Message-----
>> From: "Graeme Russ" <graeme.russ@gmail.com>
>> Sent: Friday, November 23, 2012 12:12pm
>> To: manohar.betham at smartplayin.com
>> Cc: "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>
>>
>>
>> Hi Manohar,
>>
>> On 11/23/2012 04:46 PM, manohar.betham at smartplayin.com wrote:
>>>
>>> Dear Marek,
>>>  
>>> Thank you for the reply.
>>>  
>>> Can you please send me the steps/procedure to build/support u-boot on x86_64 bit (Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz.
>>
>> I build the x86 U-Boot target on an x86_64 i7 Linux (Fedora) system using
>> the standard GNU gcc package. There was an issue with the Makefile and
>> there was a need to manually create some toolchain symlinks, but the was
>> rectified some time ago. Are you using the latest mainline U-Boot from
>> git.denx.de? If so, what errors are you getting - please provide a copy of
>> your build output.
>>
>>> We need help from you is there any documentation to enable x86_64 bit pc or links to post my query.
>>>  
>>> What are the config/code i need to change to make my pc as host & target are the same.
>>
>> Are you planning on running U-Boot on an x86_64 machine? If so, you will
>> need to create code to support that - Current U-Boot only supports 32-bit
>> x86 targets. The sandbox target (designed for testing on a Linux host, not
>> for downloading onto a board) should run on an x86_64 host.
>>
>>>  
>>> Please help us to build the u-boot on x86_64.
>>
>> Please provide more detail - what have you tried? What was the result? The
>> build scripts should work as is on a properly configured x86_64 build machine
>>
>> Regards,
>>
>> Graeme
>>
>> P.S. Please stop top posting - thanks
>>
>>>  
>>> Thank you!
>>> Best Regards,
>>> Manohar
>>> 8790215215
>>>  
>>>
>>>
>>> -----Original Message-----
>>> From: "Marek Vasut" <marex@denx.de>
>>> Sent: Friday, November 23, 2012 6:08am
>>> To: u-boot at lists.denx.de
>>> Cc: manohar.betham at smartplayin.com, "Graeme Russ" <graeme.russ@gmail.com>
>>> Subject: Re: [U-Boot] Reg Bootstrapping u-boot on x86-64 for tizen
>>>
>>>
>>>
>>> Dear manohar.betham at smartplayin.com,
>>>
>>>> Hi,
>>>>
>>>> I am Manohar,started boot the X86-64 (Intel(R) Core(TM) i5-2400 CPU @
>>>> 3.10GHz) using u-boot to work for TIZEN .
>>>>
>>>> As I am unable to configure/build my pc using u-boot-x86 .
>>>>
>>>> I request you please help me how to configure it/build the u-boot-x86 on my
>>>> pc as my pc is loaded with Ubuntu 11.10 and my aim is to make my PC as
>>>> host and target are the same.
>>>>
>>>> Please resolve the issue/is my PC support for the u-boot.
>>>
>>> You need to compile it on a 32bit machine ... or install 32bit cross compiler 
>>> ... u-boot doesn't support x86/64. Patches are welcome though.
>>>
>>> Best regards,
>>> Marek Vasut
>>>
>>
>>
> 
> 

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear All,
 
I am Manohar ,have compiled the u-boot on x86 64 bit machine using coreboot-x86.
 
Please help me / send me the procedure of bootstrapping steps of it for Tizen kernel.
 
Thank you!
Best Regards,
Manohar
8790215215

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[Wolfgang Denk]

Dear manohar.betham at smartplayin.com,

In message <1354015336.6967435@apps.rackspace.com> you wrote:
>
> 
> I am Manohar ,have compiled the u-boot on x86 64 bit machine using coreboot-x86.
> 
> Please help me / send me the procedure of bootstrapping steps of it for Tizen kernel.

Please start reading here:
http://catb.org/esr/faqs/smart-questions.html

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If ignorance is bliss, why aren't there more happy people?

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[manohar.betham at smartplayin.com]

Dear All,
 
Can you please help me how to make u-boot to support it on x86 64 bit PC intel i5 processor  (MIH61R-MB ) for Tizen kernel loading on x86 processor.
 
What are the things i need to take care of ?
 
Please help me ASAP.
 
 
Thank you!
Best Regards,
Manohar
 


-----Original Message-----
From: "Wolfgang Denk" <wd@denx.de>
Sent: Tuesday, November 27, 2012 7:17pm
To: manohar.betham at smartplayin.com
Cc: "Graeme Russ" <graeme.russ@gmail.com>, "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
Subject: Re: [U-Boot] Reg Bootstrapping on x86-64 for tizen



Dear manohar.betham at smartplayin.com,

In message <1354015336.6967435@apps.rackspace.com> you wrote:
>
> 
> I am Manohar ,have compiled the u-boot on x86 64 bit machine using coreboot-x86.
> 
> Please help me / send me the procedure of bootstrapping steps of it for Tizen kernel.

Please start reading here:
http://catb.org/esr/faqs/smart-questions.html

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If ignorance is bliss, why aren't there more happy people?

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[Simon Glass]

Hi,

On Sun, Dec 2, 2012 at 10:35 PM,  <manohar.betham@smartplayin.com> wrote:
> Dear All,
>
>
>
> Can you please help me how to make u-boot to support it on x86 64 bit PC
> intel i5 processor  (MIH61R-MB ) for Tizen kernel loading on x86 processor.
>
>
>
> What are the things i need to take care of ?
>
>
>
> Please help me ASAP.

I am not sure that anyone here knows the answer to your question. You
might find some useful patches in x86/next. Some specific problem
report may help people provide some information (e.g. I booted
coreboot, here is the console output, then U-Boot stopped and output
nothing...)

Regards,
Simon

>
>
>
>
>
> Thank you!
>
> Best Regards,
>
> Manohar
>
>
>
>
>
> -----Original Message-----
> From: "Wolfgang Denk" <wd@denx.de>
> Sent: Tuesday, November 27, 2012 7:17pm
> To: manohar.betham at smartplayin.com
> Cc: "Graeme Russ" <graeme.russ@gmail.com>, "Marek Vasut" <marex@denx.de>,
> u-boot at lists.denx.de, "Simon Glass" <sjg@chromium.org>
> Subject: Re: [U-Boot] Reg Bootstrapping on x86-64 for tizen
>
> Dear manohar.betham at smartplayin.com,
>
> In message <1354015336.6967435@apps.rackspace.com> you wrote:
>>
>>
>> I am Manohar ,have compiled the u-boot on x86 64 bit machine using
>> coreboot-x86.
>>
>> Please help me / send me the procedure of bootstrapping steps of it for
>> Tizen kernel.
>
> Please start reading here:
> http://catb.org/esr/faqs/smart-questions.html
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> If ignorance is bliss, why aren't there more happy people?

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[Simon Glass]

Hi,

On Tue, Nov 27, 2012 at 3:22 AM,  <manohar.betham@smartplayin.com> wrote:
> Dear All,
>
>
>
> I am Manohar ,have compiled the u-boot on x86 64 bit machine using
> coreboot-x86.
>
>
>
> Please help me / send me the procedure of bootstrapping steps of it for
> Tizen kernel.

Do you have coreboot working correctly on the platform? There is not a
lot of upstream support for creating a coreboot rom with U-Boot in it
yet.

Please can you point me to the toolchain you used, command line, etc.
I would be interested in replicating your build as I cannot build on a
x86_64 toolchain at present.

Regards,
Simon

>
>
>
> Thank you!
>
> Best Regards,
>
> Manohar
>
> 8790215215

[U-Boot] Reg Bootstrapping on x86-64 for tizen

[manohar.betham at smartplayin.com]

Hi,
I did following steps to compile u-boot on x86-64.
 

U-boot Build procedure 
The following command sequence is used to build the u-boot for the particular board. 
->To remove ALL files made by by make,configure
 
make distclean 
 
To configure the x86 32 bit based board for the target we have taken the coreboot

 
make coreboot-x86_config
 
To build the coreboot-x86 run the below command
 
make all
 
->if the following error [-Werror=unused-but-set-variable]
ext4fs.c: In function ?ext4fs_write_file?:
ext4fs.c:933:6: error: variable ?delayed_skipfirst? set but not used [-Werror=unused-but-set-variable]
cc1: all warnings being treated as errors
make[1]: *** [ext4fs.o] Error 1
make[1]: Leaving directory `/home/manoharb/Kernel_Tizen/intel_tizen/latest/u-boot/fs/ext4'
make: *** [fs/ext4/libext4fs.o] Error 2 
 
?__maybe_unused? in front of variable declaration
 
 
vim fs/ext4/ext4fs.c +122
 
for example __maybe_unused int delayed_skipfirst = 0;
 
 
2)if the error comes from the ?/usr/bin/ld.bfd.real: cannot find -lgcc ?
 
sudo apt-get install ia32-libs 
export LIBRARY_PATH=/usr/lib/x86_64-linux-gnu 
 
As of now i required the procedure to build Tizen kernel on my x86-64 bit machine.
 
Please help me to build it or send me the procedure.
 
Thank you!
Best Regards,
Manohar


-----Original Message-----
From: "Simon Glass" <sjg@chromium.org>
Sent: Thursday, November 29, 2012 1:25am
To: manohar.betham at smartplayin.com
Cc: "Graeme Russ" <graeme.russ@gmail.com>, "Marek Vasut" <marex@denx.de>, u-boot at lists.denx.de
Subject: Re: Reg Bootstrapping on x86-64 for tizen



Hi,

On Tue, Nov 27, 2012 at 3:22 AM,  <manohar.betham@smartplayin.com> wrote:
> Dear All,
>
>
>
> I am Manohar ,have compiled the u-boot on x86 64 bit machine using
> coreboot-x86.
>
>
>
> Please help me / send me the procedure of bootstrapping steps of it for
> Tizen kernel.

Do you have coreboot working correctly on the platform? There is not a
lot of upstream support for creating a coreboot rom with U-Boot in it
yet.

Please can you point me to the toolchain you used, command line, etc.
I would be interested in replicating your build as I cannot build on a
x86_64 toolchain at present.

Regards,
Simon

>
>
>
> Thank you!
>
> Best Regards,
>
> Manohar
>
> 8790215215