[U-Boot] [PATCH v2 3/7] Tegra30: Add CPU (armv7) files

[Tom Warren <twarren.nvidia@gmail.com>]

These files are for code that runs on the CPU (A9) on T30 boards.
At this time, it's only the RCM (Recovery Mode) cmd file, which
is in tegra-common. As T30-specific run-time code is added, it'll
go here.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
V2: Cleanup whitespace issues

 arch/arm/cpu/armv7/tegra30/Makefile  |   40 ++++++++++++++++++++++++++++++++++
 arch/arm/cpu/armv7/tegra30/config.mk |   19 ++++++++++++++++
 2 files changed, 59 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/cpu/armv7/tegra30/Makefile
 create mode 100644 arch/arm/cpu/armv7/tegra30/config.mk

diff --git a/arch/arm/cpu/armv7/tegra30/Makefile b/arch/arm/cpu/armv7/tegra30/Makefile
new file mode 100644
index 0000000..04adb52
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra30/Makefile
@@ -0,0 +1,40 @@
+#
+# Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd at denx.de.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(SOC).o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(obj).depend $(LIB)
+
+$(LIB):	$(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/tegra30/config.mk b/arch/arm/cpu/armv7/tegra30/config.mk
new file mode 100644
index 0000000..719ca81
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra30/config.mk
@@ -0,0 +1,19 @@
+#
+# Copyright (c) 2010-2012, NVIDIA CORPORATION.  All rights reserved.
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+#
+CONFIG_ARCH_DEVICE_TREE := tegra30
-- 
1.7.0.4