From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Date: Mon, 7 Jan 2013 18:49:59 -0600
Subject: [U-Boot] [PATCH 00/13] mxc nand: Add support for i.MX5
In-Reply-To: <201301071447.13087.marex@denx.de> (from marex@denx.de on Mon
	Jan  7 07:47:12 2013)
Message-ID: <1357606199.1113.16@snotra>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 01/07/2013 07:47:12 AM, Marek Vasut wrote:
> Dear Beno?t Th?baudeau,
> 
> > Dear Marek Vasut,
> >
> > On Monday, January 7, 2013 2:02:47 PM, Marek Vasut wrote:
> > > Dear Beno?t Th?baudeau,
> > >
> > > > Hi all,
> > > >
> > > > This series aims at adding support for i.MX5 to the mxc nand mtd
> > > > and spl
> > > > drivers. It also fixes several issues and cleans up the code a
> > > > little bit.
> > > >
> > > > Best regards,
> > > > Beno?t
> > >
> > > Did this patchset advance any further? Any chance we can see this
> > > applied?
> > > Anything I can help with to make it applied?
> >
> > Only 13/13 has not yet been applied. I still have to add NFC  
> support to one
> > i.MX5 board for the patch to be accepted. Fabio has confirmed that  
> mx53ard
> > would be fine.
> 
> Sigh ... I have board with NAND pending, so Scott, please apply.

Can you repost it as part of a patchset with that board, and I'll ack  
so they can go together?

Does this board do NAND boot?  If so, new-SPL rather than nand_spl  
would be nice.  Tom's comment at the time was, "I'm OK with pulling  
this in while providing an on-the-record prod to please find some time  
to do a conversion or two in time for v2013.01."  If this patch is  
applied now, it would be for the release after v2013.01...

-Scott