[U-Boot] [PATCH 2/2] Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board

[Tom Warren <twarren.nvidia@gmail.com>]

Tested all 5 'buses', i2c probe enumerates device addresses on bus
1 and 2.

Note that this uses the tegra_i2c.c driver w/o modification.

Signed-off-by: Tom Warren <twarren@nvidia.com>
---
 include/configs/dalmore.h         |    9 +++++++++
 include/configs/tegra114-common.h |    3 +++
 2 files changed, 12 insertions(+), 0 deletions(-)

diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h
index ce32c80..b1a6e34 100644
--- a/include/configs/dalmore.h
+++ b/include/configs/dalmore.h
@@ -41,6 +41,15 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_DALMORE
 
 #define CONFIG_BOARD_EARLY_INIT_F
+
+/* I2C */
+#define CONFIG_TEGRA_I2C
+#define CONFIG_SYS_I2C_INIT_BOARD
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS		TEGRA_I2C_NUM_CONTROLLERS
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_CMD_I2C
+
 #define CONFIG_ENV_IS_NOWHERE
 
 #define MACH_TYPE_DALMORE	4304	/* not yet in mach-types.h */
diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h
index 0033530..c2986d8 100644
--- a/include/configs/tegra114-common.h
+++ b/include/configs/tegra114-common.h
@@ -76,4 +76,7 @@
 
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/tegra114/u-boot-spl.lds"
 
+/* Total I2C ports on Tegra114 */
+#define TEGRA_I2C_NUM_CONTROLLERS	5
+
 #endif /* _TEGRA114_COMMON_H_ */
-- 
1.7.0.4