[U-Boot-Users] u-boot to mpc8260

[xyyiezi <xyyiezi@163.com>]

 Dear sir:       First,I'll explain the circuit netlist. It is the circuit diagram of the mpc8260,and it is similar to the actually circuit in hardware. And I have a test bench which is written by specmanE. The test bench can simulate the hardware fuction of the actually cpu board which is designed for mpc8260. And the test bench is similar to periphrial equpment of mpc8260.It can communication the mpc8260 netlist vi 60x bus circuit,and I have been used it to test a part of the circuit netlist of mpc8260,and the result is famous. Because the circuit diagram of mpc8260 is so large and I can't ensure the netlist is exactness.      And I guess I could load u-boot to mpc8260 netlist which is under the test bench which is similar to the board.I will put u-boot in a RAM which is also the circuit diagram and has the fuction similar to the actully one. The RAM is in the sun sever(The netlist is in the sun server too.).      I will compile the u-boot and generate the boot.bin and boot.elf. Then I will configure the u-boot to make it fit the test bench and connect to the test bench. Third, I will boot the linux kernel to the mpc8260 netlist. At last,I'll used linux system to verificate the netlist.      It is a way of hardware and software co-verification. It is really a long long  journey.And I will do it.      I hope I can earn your help!                                                    Yours   xyyiezi         
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070719/cdd922d1/attachment.htm