From mboxrd@z Thu Jan  1 00:00:00 1970
From: Scott Wood <scottwood@freescale.com>
Date: Wed, 6 Feb 2013 12:35:25 -0600
Subject: [U-Boot] changing bootcmd environment
In-Reply-To: <CALM_QrW-mrNfxfSjp6j62a4YUvu32ZGvWaScw-+fBbSSCG9r7Q@mail.gmail.com>
	(from ratheendran.s@gmail.com on Tue Feb  5 22:25:41 2013)
References: <CALM_QrWsqsNSNZTtEqrpHaksNWKRUX-dRNMXrhqDkF9ajxf+Yw@mail.gmail.com>
	<1360086056.26462.9@snotra>
	<CALM_QrW-mrNfxfSjp6j62a4YUvu32ZGvWaScw-+fBbSSCG9r7Q@mail.gmail.com>
Message-ID: <1360175725.32555.4@snotra>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

On 02/05/2013 10:25:41 PM, Ratheendran R wrote:
> Thanks Scott for your valuable feedback & suggestion.
> 
> I am using the board which is uses SD Card boot & NAND boot  
> options,SD CARD
> boot is used to write firmware to be  NAND flash and used only to  
> update
> the firmware to NAND.

Every time you boot?

And you should never use "nand scrub" in an automated way.

-Scott