From: Sonic Zhang <sonic.adi@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/11] Blackfin: bf60x: add hw watchdog support
Date: Thu, 7 Feb 2013 15:47:37 +0800 [thread overview]
Message-ID: <1360223258-6945-11-git-send-email-sonic.adi@gmail.com> (raw)
In-Reply-To: <1360223258-6945-1-git-send-email-sonic.adi@gmail.com>
From: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
---
arch/blackfin/cpu/initcode.c | 13 +++++++++++++
arch/blackfin/cpu/start.S | 2 ++
include/configs/bf609-ezkit.h | 1 +
3 files changed, 16 insertions(+), 0 deletions(-)
diff --git a/arch/blackfin/cpu/initcode.c b/arch/blackfin/cpu/initcode.c
index acfa475..5ee2203 100644
--- a/arch/blackfin/cpu/initcode.c
+++ b/arch/blackfin/cpu/initcode.c
@@ -461,8 +461,21 @@ program_early_devices(ADI_BOOT_DATA *bs, uint *sdivB, uint *divB, uint *vcoB)
*/
if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) {
serial_putc('e');
+#ifdef __ADSPBF60x__
+ bfin_write_SEC_GCTL(0x2);
+ SSYNC();
+ bfin_write_SEC_FCTL(0xc1);
+ bfin_write_SEC_SCTL(2, bfin_read_SEC_SCTL(2) | 0x6);
+
+ bfin_write_SEC_CCTL(0x2);
+ SSYNC();
+ bfin_write_SEC_GCTL(0x1);
+ bfin_write_SEC_CCTL(0x1);
+#endif
bfin_write_WDOG_CNT(MSEC_TO_SCLK(CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE));
+#if CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART
bfin_write_WDOG_CTL(0);
+#endif
serial_putc('f');
}
#endif
diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S
index 90b4d1a..7155fc8 100644
--- a/arch/blackfin/cpu/start.S
+++ b/arch/blackfin/cpu/start.S
@@ -65,6 +65,7 @@ ENTRY(_start)
p5.h = HI(COREMMR_BASE);
#ifdef CONFIG_HW_WATCHDOG
+#ifndef __ADSPBF60x__
# ifndef CONFIG_HW_WATCHDOG_TIMEOUT_START
# define CONFIG_HW_WATCHDOG_TIMEOUT_START 5000
# endif
@@ -78,6 +79,7 @@ ENTRY(_start)
/* fire up the watchdog - R0.L above needs to be 0x0000 */
W[p4 + (WDOG_CTL - SYSMMR_BASE)] = r0;
#endif
+#endif
/* Turn on the serial for debugging the init process */
serial_early_init
diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h
index a599127..0b5859f 100644
--- a/include/configs/bf609-ezkit.h
+++ b/include/configs/bf609-ezkit.h
@@ -67,6 +67,7 @@
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
+#define CONFIG_HW_WATCHDOG
/*
* Network Settings
*/
--
1.7.0.4
next prev parent reply other threads:[~2013-02-07 7:47 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-07 7:47 [U-Boot] [PATCH 00/11] Add BF60x processor support to Blackfin architecture Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 01/11] Blackfin: bf60x: new processor header files Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 02/11] Blackfin: bf60x: Port blackfin core architecture code to boot on bf60x Sonic Zhang
2013-02-07 10:21 ` Wolfgang Denk
2013-02-08 4:31 ` Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 03/11] Blackfin: bf60x: add serial support Sonic Zhang
2013-02-07 10:15 ` Wolfgang Denk
2013-02-08 4:20 ` Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 04/11] Blackfin: bf60x: add dma support Sonic Zhang
2013-02-07 10:11 ` Wolfgang Denk
2013-02-08 4:17 ` Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 05/11] Blackfin: bf60x: support big cplb page Sonic Zhang
2013-02-07 10:33 ` Wolfgang Denk
2013-02-08 4:22 ` Sonic Zhang
2013-02-18 2:43 ` Bob Liu
2013-02-18 7:41 ` Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 06/11] Blackfin: bf60x: add gpio support Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 07/11] blackfin: bf609: add board and headers files to support bf609 Sonic Zhang
2013-02-07 10:26 ` Wolfgang Denk
2013-02-08 4:26 ` Sonic Zhang
2013-02-08 6:29 ` Sonic Zhang
2013-02-08 8:29 ` Sonic Zhang
2013-02-17 20:13 ` Wolfgang Denk
2013-02-07 7:47 ` [U-Boot] [PATCH 08/11] Blackfin: bf60x: add rsi/sdh support Sonic Zhang
2013-02-07 10:17 ` Wolfgang Denk
2013-02-08 4:33 ` Sonic Zhang
2013-02-08 8:35 ` Sonic Zhang
2013-02-17 20:15 ` Wolfgang Denk
2013-02-18 7:38 ` Sonic Zhang
2013-03-04 11:21 ` Wolfgang Denk
2013-03-05 2:22 ` Sonic Zhang
2013-02-07 7:47 ` [U-Boot] [PATCH 09/11] Blackfin: spi: add bf6xx spi driver Sonic Zhang
2013-02-07 10:23 ` Wolfgang Denk
2013-02-08 6:50 ` Sonic Zhang
2013-02-17 20:12 ` Wolfgang Denk
2013-02-07 7:47 ` Sonic Zhang [this message]
2013-02-07 7:47 ` [U-Boot] [PATCH 11/11] Blackfin: bf60x: add resume from hibernate Sonic Zhang
2013-02-07 10:22 ` Wolfgang Denk
2013-02-07 10:04 ` [U-Boot] [PATCH 00/11] Add BF60x processor support to Blackfin architecture Wolfgang Denk
2013-02-07 12:28 ` Albert ARIBAUD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360223258-6945-11-git-send-email-sonic.adi@gmail.com \
--to=sonic.adi@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox