From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lucas Stach Date: Mon, 11 Feb 2013 18:28:26 +0100 Subject: [U-Boot] [PATCH v2 1/2] Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files In-Reply-To: <1360603051-29478-2-git-send-email-twarren@nvidia.com> References: <1360603051-29478-1-git-send-email-twarren@nvidia.com> <1360603051-29478-2-git-send-email-twarren@nvidia.com> Message-ID: <1360603706.1537.2.camel@tellur> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom, Am Montag, den 11.02.2013, 10:17 -0700 schrieb Tom Warren: > Linux dts files were used for those boards that didn't already > have sdhci info populated. Tamonten has their own dtsi file with > common sdhci nodes (sourced from Linux). > > Signed-off-by: Tom Warren > --- > v2: > - cleanup comments in dts files/match w/kernel files > - add sdhci aliases in all dts files > - use tegra20-tamonten.dtsi from the kernel for AD boards > > arch/arm/dts/tegra20-tamonten.dtsi | 489 ++++++++++++++++++++++ I'm not sure if pushing the whole file in this patch is the right thing to do. > arch/arm/dts/tegra20.dtsi | 16 +- > board/avionic-design/dts/tegra20-medcom-wide.dts | 1 + > board/avionic-design/dts/tegra20-plutux.dts | 1 + > board/avionic-design/dts/tegra20-tec.dts | 1 + > board/compal/dts/tegra20-paz00.dts | 19 +- > board/compulab/dts/tegra20-trimslice.dts | 14 + > board/nvidia/dts/tegra20-harmony.dts | 18 + > board/nvidia/dts/tegra20-seaboard.dts | 12 +- > board/nvidia/dts/tegra20-ventana.dts | 15 + > board/nvidia/dts/tegra20-whistler.dts | 13 + > board/toradex/dts/tegra20-colibri_t20_iris.dts | 6 + > 12 files changed, 595 insertions(+), 10 deletions(-) > create mode 100644 arch/arm/dts/tegra20-tamonten.dtsi > [...] > diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts > index c29b43a..0dd4c43 100644 > --- a/board/toradex/dts/tegra20-colibri_t20_iris.dts > +++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts > @@ -10,6 +10,7 @@ > usb0 = "/usb at c5008000"; > usb1 = "/usb at c5000000"; > usb2 = "/usb at c5004000"; > + sdhci0 = "/sdhci at c8000600"; > }; > > usb at c5000000 { > @@ -35,4 +36,9 @@ > compatible = "nand-flash"; > }; > }; > + > + sdhci at c8000600 { > + status = "okay"; > + bus-width = <4>; You are missing the CD GPIO here. It's PC7. > + }; > }; Regards, Lucas