From: Matt Porter <mporter@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 09/10] ti814x_evm: enable ti814x evm build
Date: Wed, 13 Feb 2013 09:44:03 -0500 [thread overview]
Message-ID: <1360766644-9901-10-git-send-email-mporter@ti.com> (raw)
In-Reply-To: <1360766644-9901-1-git-send-email-mporter@ti.com>
Enable TI814X EVM build via ti814x_evm target.
Signed-off-by: Matt Porter <mporter@ti.com>
---
Makefile | 2 +-
arch/arm/cpu/armv7/Makefile | 2 +-
arch/arm/cpu/armv7/omap-common/Makefile | 2 +-
boards.cfg | 1 +
spl/Makefile | 2 +-
5 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/Makefile b/Makefile
index 51bd918..120ab31 100644
--- a/Makefile
+++ b/Makefile
@@ -334,7 +334,7 @@ LIBS-y += api/libapi.o
LIBS-y += post/libpost.o
LIBS-y += test/libtest.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 4fdbee4..156a5ba 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -32,7 +32,7 @@ COBJS += cache_v7.o
COBJS += cpu.o
COBJS += syslib.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TEGRA20)$(CONFIG_TI814X),)
SOBJS += lowlevel_init.o
endif
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 0efc80d..55e82ba 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -36,7 +36,7 @@ COBJS += emif-common.o
COBJS += vc.o
endif
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
COBJS += boot-common.o
SOBJS += lowlevel_init.o
endif
diff --git a/boards.cfg b/boards.cfg
index 98f7a14..0eabae9 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -236,6 +236,7 @@ am335x_evm_uart2 arm armv7 am335x ti
am335x_evm_uart3 arm armv7 am335x ti am33xx am335x_evm:SERIAL4,CONS_INDEX=4
am335x_evm_uart4 arm armv7 am335x ti am33xx am335x_evm:SERIAL5,CONS_INDEX=5
am335x_evm_uart5 arm armv7 am335x ti am33xx am335x_evm:SERIAL6,CONS_INDEX=6
+ti814x_evm arm armv7 ti814x ti am33xx
highbank arm armv7 highbank - highbank
mx51_efikamx arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
mx51_efikasb arm armv7 mx51_efikamx genesi mx5 mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
diff --git a/spl/Makefile b/spl/Makefile
index 6dbb105..9761e7d 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -82,7 +82,7 @@ LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
-ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX)$(CONFIG_TI814X),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
--
1.7.9.5
next prev parent reply other threads:[~2013-02-13 14:44 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-13 14:43 [U-Boot] [PATCH 00/10] Add TI814x EVM Support Matt Porter
2013-02-13 14:43 ` [U-Boot] [PATCH 01/10] am33xx: convert defines from am33xx-specific to generic names Matt Porter
2013-02-15 16:36 ` Tom Rini
2013-02-13 14:43 ` [U-Boot] [PATCH 02/10] am33xx: refactor emif4/ddr to support multiple EMIF instances Matt Porter
2013-02-15 16:37 ` Tom Rini
2013-02-13 14:43 ` [U-Boot] [PATCH 03/10] am33xx: refactor am33xx clocks and add ti814x support Matt Porter
2013-02-15 16:37 ` Tom Rini
[not found] ` <2cc71ab85c654e688082a434442f08d8@DLEE74.ent.ti.com>
2013-02-15 21:16 ` Matt Porter
2013-02-17 20:17 ` Peter Korsgaard
2013-02-25 14:31 ` Matt Porter
2013-02-13 14:43 ` [U-Boot] [PATCH 04/10] am33xx: refactor am33xx mux support " Matt Porter
2013-02-15 16:37 ` Tom Rini
2013-02-17 20:18 ` Peter Korsgaard
[not found] ` <463068779ea9433098998cd260b4c550@DFLE73.ent.ti.com>
2013-02-25 14:32 ` Matt Porter
2013-02-13 14:43 ` [U-Boot] [PATCH 05/10] am33xx: add ti814x specific register definitions Matt Porter
2013-02-15 16:37 ` Tom Rini
2013-02-17 20:28 ` Peter Korsgaard
2013-02-18 15:18 ` Tom Rini
2013-02-18 15:21 ` Peter Korsgaard
2013-02-21 22:08 ` Brian Hutchinson
2013-02-22 15:37 ` Peter Korsgaard
2013-02-22 15:51 ` Tom Rini
2013-02-22 16:34 ` Peter Korsgaard
[not found] ` <bc703446ae2c4dc79a6097dc28327030@DLEE74.ent.ti.com>
2013-02-25 14:46 ` Matt Porter
2013-02-13 14:44 ` [U-Boot] [PATCH 06/10] am33xx: add dmm support to emif4 library Matt Porter
2013-02-15 16:38 ` Tom Rini
2013-02-13 14:44 ` [U-Boot] [PATCH 07/10] ti814x_evm: add ti814x evm board support Matt Porter
2013-02-15 16:38 ` Tom Rini
[not found] ` <e0c6e2fe1afd4a5887b85c5b7d1877ce@DLEE74.ent.ti.com>
2013-02-15 21:19 ` Matt Porter
2013-02-13 14:44 ` [U-Boot] [PATCH 08/10] ns16550: enable quirks for ti814x Matt Porter
2013-02-15 16:38 ` Tom Rini
2013-02-13 14:44 ` Matt Porter [this message]
2013-02-15 16:39 ` [U-Boot] [PATCH 09/10] ti814x_evm: enable ti814x evm build Tom Rini
2013-02-15 21:20 ` Matt Porter
2013-02-13 14:44 ` [U-Boot] [PATCH 10/10] MAINTAINERS: add ti814x_evm maintainer Matt Porter
2013-02-15 16:39 ` Tom Rini
2013-02-15 21:21 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1360766644-9901-10-git-send-email-mporter@ti.com \
--to=mporter@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox