public inbox for u-boot@lists.denx.de
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 0/7] Move Tegra EHCI drive to correct place
Date: Fri, 15 Feb 2013 01:00:05 +0100	[thread overview]
Message-ID: <1360886405.1702.6.camel@localhost> (raw)
In-Reply-To: <201302141727.22809.marex@denx.de>

Am Donnerstag, den 14.02.2013, 17:27 +0100 schrieb Marek Vasut:
> Dear Lucas Stach,
> 
> > This moves out the Tegra EHCI driver from a platform specific directory
> > to the standard driver/usb/host dir.
> > 
> > This is a preparation needed to share this driver between Tegra20 and
> > Tegra30. No functional change in here, so Tegra30 is still not working.
> > 
> > Patch 6 could be a lot smaller if it were generated with -B, as GIT would
> > detect that most of it is moving stuff over, but last time I did this it
> > prevented git apply to work. So sorry for the big diff.
> > 
> > I think I incorporated all changes needed to reflect the review feedback
> > I got on this last time.
> > 
> > V3 is rebased onto u-boot-tegra/next, fixes a build warning and has Simons
> > acked-by attached to the patches.
> > 
> > I expect this series to go in through the Tegra tree. Marek, I suppose you
> > are OK with the series, as you already were about to apply them in V2 form,
> > please ACK so Tom can pick them up.
> > 
> > Lucas Stach (7):
> >   tegra: usb: set USB_PORTS_MAX to correct value
> >   tegra: usb: make controller init functions more self contained
> >   tegra: usb: remove unneeded function parameter
> >   tegra: usb: move controller init into start_port
> >   tegra: usb: various small cleanups
> >   tegra: usb: move implementation into right directory
> >   tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop]
> > 
> >  arch/arm/cpu/armv7/tegra20/Makefile       |   1 -
> >  arch/arm/cpu/armv7/tegra20/usb.c          | 567
> > ------------------------------ arch/arm/include/asm/arch-tegra/usb.h     |
> > 249 +++++++++++++
> >  arch/arm/include/asm/arch-tegra20/tegra.h |   1 -
> >  arch/arm/include/asm/arch-tegra20/usb.h   | 271 --------------
> >  arch/arm/include/asm/arch-tegra30/tegra.h |   2 +
> >  board/nvidia/common/board.c               |   2 +-
> >  drivers/usb/host/ehci-tegra.c             | 546
> > +++++++++++++++++++++++++++- 8 files changed, 782 insertions(+), 857
> > deletions(-)
> >  delete mode 100644 arch/arm/cpu/armv7/tegra20/usb.c
> >  create mode 100644 arch/arm/include/asm/arch-tegra/usb.h
> >  delete mode 100644 arch/arm/include/asm/arch-tegra20/usb.h
> 
> These will go through the tegra tree, yes? Otherwise I'm fine with these 
> patches.
> 
Yes, they are intended to go through the Tegra tree. I think Tom will
pick them up for his next PR.

Regards,
Lucas

      reply	other threads:[~2013-02-15  0:00 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-07 17:16 [U-Boot] [PATCH v3 0/7] Move Tegra EHCI drive to correct place Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 1/7] tegra: usb: set USB_PORTS_MAX to correct value Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 2/7] tegra: usb: make controller init functions more self contained Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 3/7] tegra: usb: remove unneeded function parameter Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 4/7] tegra: usb: move controller init into start_port Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 5/7] tegra: usb: various small cleanups Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 6/7] tegra: usb: move implementation into right directory Lucas Stach
2013-02-07 17:16 ` [U-Boot] [PATCH v3 7/7] tegra: usb: move [start|stop]_port into ehci_hcd_[init|stop] Lucas Stach
2013-02-12 18:32   ` Simon Glass
2013-02-11  7:04 ` [U-Boot] [PATCH v3 0/7] Move Tegra EHCI drive to correct place Marek Vasut
2013-02-14 16:27 ` Marek Vasut
2013-02-15  0:00   ` Lucas Stach [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1360886405.1702.6.camel@localhost \
    --to=dev@lynxeye.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox