From: Scott Wood <scottwood@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] powerpc/p1022ds: Add support for NAND and NAND boot using SPL
Date: Mon, 18 Feb 2013 13:26:14 -0600 [thread overview]
Message-ID: <1361215574.14186.16@snotra> (raw)
In-Reply-To: <70CC66F5C30A414DADDA6973E4CA391A8886A8@039-SN1MPN1-001.039d.mgd.msft.net> (from B29882@freescale.com on Mon Feb 18 13:24:44 2013)
On 02/18/2013 01:24:44 PM, McClintock Matthew-B29882 wrote:
> On Mon, Feb 18, 2013 at 1:18 PM, Scott Wood <scottwood@freescale.com>
> wrote:
> > On 02/18/2013 01:07:53 PM, Matthew McClintock wrote:
> >>
> >> @@ -118,6 +172,7 @@
> >> * Localbus non-cacheable
> >> * 0xe000_0000 0xe80f_ffff Promjet/free 128M
> non-cacheable
> >> * 0xe800_0000 0xefff_ffff FLASH 128M
> non-cacheable
> >> + * 0xff80_0000 0xff80_1fff NAND 8K
> non-cacheable
> >> * 0xffdf_0000 0xffdf_7fff PIXIS 32K
> non-cacheable
> >> TLB0
> >> * 0xffd0_0000 0xffd0_3fff L1 for stack 16K
> Cacheable TLB0
> >> * 0xffe0_0000 0xffef_ffff CCSR 1M
> non-cacheable
> >
> >
> > This says 8K...
> >
> >
> >> +/* NAND flash config */
> >> +#define CONFIG_SYS_NAND_BR_PRELIM
> >> (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
> >> + | (2<<BR_DECC_SHIFT) /* Use HW
> ECC */ \
> >> + | BR_PS_8 /* Port
> Size = 8
> >> bit */ \
> >> + | BR_MS_FCM /* MSEL =
> FCM */ \
> >> + | BR_V) /* valid */
> >> +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /*
> length
> >> 256K */ \
> >> + | OR_FCM_PGS /* Large
> Page*/ \
> >> + | OR_FCM_CSCT \
> >> + | OR_FCM_CST \
> >> + | OR_FCM_CHT \
> >> + | OR_FCM_SCY_1 \
> >> + | OR_FCM_TRLX \
> >> + | OR_FCM_EHTR)
> >
> >
> > ...this says 256K.
> >
> > IIRC the minimum for localbus is 32K.
>
> And the law is 8K and TLB is 16K - should I go with 32K for
> everything? However, I don't think 32K TLB works on this part.
You don't need to create a 32K TLB, but the documented address map
should agree with what you put in the actual hardware (and LAWs should
agree with ORn/BRn).
-Scott
next prev parent reply other threads:[~2013-02-18 19:26 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-14 21:35 [U-Boot] [PATCH] powerpc/p1022ds: Add support for NAND and NAND boot using SPL Matthew McClintock
2013-02-16 0:34 ` Scott Wood
2013-02-18 19:07 ` McClintock Matthew-B29882
2013-02-18 19:07 ` Matthew McClintock
2013-02-18 19:18 ` Scott Wood
2013-02-18 19:24 ` McClintock Matthew-B29882
2013-02-18 19:26 ` Scott Wood [this message]
2013-02-18 20:02 ` Matthew McClintock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361215574.14186.16@snotra \
--to=scottwood@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox