From: Sonic Zhang <sonic.adi@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/11] *** SUBJECT HERE ***
Date: Tue, 19 Feb 2013 15:00:55 +0800 [thread overview]
Message-ID: <1361257266-3722-1-git-send-email-sonic.adi@gmail.com> (raw)
From: Sonic Zhang <sonic.zhang@analog.com>
ADSP-BF60x is the new generation Blackfin?? dual-core processor announced by
Analog Devices in late March, 2012. This patch set adds BF60x processor support
to Das U-Boot Blackfin architecture.
For more information, see http://blackfin.uclinux.org .
The v2 patches
1) fix most checkpatch issues mentioned by Wolfgang
2) remove unrelated dma structure change patch
3) replace unreable macro in dma and uart structures with normal types.
4) replace unreable macro in uart peripheral portmux configuration with clear inline function.
5) clean up and merge redundant #ifdef's
6) spearate declarations and code by a blankline
7) remove the values for variables in blackfin config headers whose values are useless
8) replace run-time variable with new macro when adding 4M byte CPLB entries.
Bob Liu (5):
Blackfin: bf60x: new processor header files
Blackfin: bf60x: add dma support
Blackfin: bf60x: support big cplb page
Blackfin: bf60x: add gpio support
Blackfin: bf60x: add hw watchdog support
Scott Jiang (1):
Blackfin: spi: add bf6xx spi driver
Sonic Zhang (4):
Blackfin: bf60x: Port blackfin core architecture code to boot on
bf60x.
Blackfin: bf60x: add serial support
blackfin: bf609: add board and headers files to support bf609
Blackfin: bf60x: add rsi/sdh support
Steven Miao (1):
Blackfin: bf60x: add resume from hibernate
MAINTAINERS | 3 +-
arch/blackfin/cpu/cpu.c | 4 +-
arch/blackfin/cpu/gpio.c | 36 +-
arch/blackfin/cpu/initcode.c | 385 ++-
arch/blackfin/cpu/initcode.h | 52 +
arch/blackfin/cpu/reset.c | 6 +
arch/blackfin/cpu/serial.c | 81 +-
arch/blackfin/cpu/serial.h | 222 +--
arch/blackfin/cpu/serial1.h | 338 ++
arch/blackfin/cpu/serial4.h | 159 +
arch/blackfin/cpu/start.S | 2 +
arch/blackfin/include/asm/blackfin_cdef.h | 3 +
arch/blackfin/include/asm/blackfin_def.h | 5 +
arch/blackfin/include/asm/blackfin_local.h | 3 +
arch/blackfin/include/asm/config-pre.h | 4 +
arch/blackfin/include/asm/cplb.h | 31 +-
arch/blackfin/include/asm/dma.h | 81 +-
arch/blackfin/include/asm/gpio.h | 2 +-
arch/blackfin/include/asm/mach-bf533/BF531_def.h | 1 +
arch/blackfin/include/asm/mach-bf561/BF561_def.h | 1 +
arch/blackfin/include/asm/mach-bf609/BF609_cdef.h | 551 +++
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 3758 ++++++++++++++++++++
arch/blackfin/include/asm/mach-bf609/anomaly.h | 103 +
arch/blackfin/include/asm/mach-bf609/def_local.h | 5 +
arch/blackfin/include/asm/mach-bf609/gpio.h | 151 +
arch/blackfin/include/asm/mach-bf609/portmux.h | 257 ++
arch/blackfin/include/asm/mach-bf609/ports.h | 103 +
arch/blackfin/include/asm/mach-common/bits/cgu.h | 80 +
arch/blackfin/include/asm/mach-common/bits/dde.h | 88 +
arch/blackfin/include/asm/mach-common/bits/dma.h | 54 +-
arch/blackfin/include/asm/mach-common/bits/mpu.h | 6 +-
arch/blackfin/include/asm/mach-common/bits/pll.h | 5 +
arch/blackfin/include/asm/mach-common/bits/sdh.h | 38 +-
.../blackfin/include/asm/mach-common/bits/spi6xx.h | 240 ++
arch/blackfin/include/asm/mach-common/bits/uart4.h | 66 +
arch/blackfin/lib/board.c | 25 +-
arch/blackfin/lib/clocks.c | 112 +-
arch/blackfin/lib/string.c | 97 +-
board/bf609-ezkit/Makefile | 55 +
board/bf609-ezkit/bf609-ezkit.c | 67 +
boards.cfg | 1 +
common/cmd_reginfo.c | 19 +-
drivers/mmc/bfin_sdh.c | 68 +-
drivers/spi/Makefile | 1 +
drivers/spi/bfin_spi6xx.c | 308 ++
include/configs/bf609-ezkit.h | 162 +
include/configs/bfin_adi_common.h | 12 +-
47 files changed, 7455 insertions(+), 396 deletions(-)
create mode 100644 arch/blackfin/cpu/serial1.h
create mode 100644 arch/blackfin/cpu/serial4.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_cdef.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_def.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/anomaly.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/def_local.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/gpio.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/portmux.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/ports.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/cgu.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/dde.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/spi6xx.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/uart4.h
create mode 100644 board/bf609-ezkit/Makefile
create mode 100644 board/bf609-ezkit/bf609-ezkit.c
create mode 100644 drivers/spi/bfin_spi6xx.c
create mode 100644 include/configs/bf609-ezkit.h
next reply other threads:[~2013-02-19 7:00 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-19 7:00 Sonic Zhang [this message]
2013-02-19 7:00 ` [U-Boot] [PATCH v2 01/11] Blackfin: bf60x: new processor header files Sonic Zhang
2013-02-19 10:15 ` Wolfgang Denk
2013-02-20 3:20 ` Sonic Zhang
2013-02-19 7:00 ` [U-Boot] [PATCH v2 02/11] Blackfin: bf60x: Port blackfin core architecture code to boot on bf60x Sonic Zhang
2013-02-19 7:00 ` [U-Boot] [PATCH v2 03/11] Blackfin: bf60x: add serial support Sonic Zhang
2013-02-19 7:00 ` [U-Boot] [PATCH v2 04/11] Blackfin: bf60x: add dma support Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 05/11] Blackfin: bf60x: support big cplb page Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 06/11] Blackfin: bf60x: add gpio support Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 07/11] blackfin: bf609: add board and headers files to support bf609 Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 08/11] Blackfin: bf60x: add rsi/sdh support Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 09/11] Blackfin: spi: add bf6xx spi driver Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 10/11] Blackfin: bf60x: add hw watchdog support Sonic Zhang
2013-02-19 7:01 ` [U-Boot] [PATCH v2 11/11] Blackfin: bf60x: add resume from hibernate Sonic Zhang
2013-02-19 10:14 ` [U-Boot] [PATCH v2 00/11] *** SUBJECT HERE *** Wolfgang Denk
2013-02-20 8:36 ` Sonic Zhang
2013-02-21 1:50 ` Tom Rini
2013-02-21 10:46 ` Sonic Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361257266-3722-1-git-send-email-sonic.adi@gmail.com \
--to=sonic.adi@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox