From: Sonic Zhang <sonic.adi@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 00/11] Add BF60x processor support to Blackfin architecture.
Date: Wed, 20 Feb 2013 16:50:06 +0800 [thread overview]
Message-ID: <1361350217-7592-1-git-send-email-sonic.adi@gmail.com> (raw)
From: Sonic Zhang <sonic.zhang@analog.com>
ADSP-BF60x is the new generation Blackfin?? dual-core processor announced by
Analog Devices in late March, 2012. This patch set adds BF60x processor support
to Das U-Boot Blackfin architecture.
For more information, see http://blackfin.uclinux.org .
The v3 patches fix the review issues against v1 and v2 from Wolfgang.
See the change log in each patches for details.
Bob Liu (5):
Blackfin: bf60x: new processor header files
Blackfin: bf60x: add dma support
Blackfin: bf60x: support big cplb page
Blackfin: bf60x: add gpio support
Blackfin: bf60x: add hw watchdog support
Scott Jiang (1):
Blackfin: spi: add bf6xx spi driver
Sonic Zhang (4):
Blackfin: bf60x: Port blackfin core architecture code to boot on
bf60x.
Blackfin: bf60x: add serial support
blackfin: bf609: add board and headers files to support bf609
Blackfin: bf60x: add rsi/sdh support
Steven Miao (1):
Blackfin: bf60x: add resume from hibernate
MAINTAINERS | 3 +-
arch/blackfin/cpu/cpu.c | 4 +-
arch/blackfin/cpu/gpio.c | 36 ++-
arch/blackfin/cpu/initcode.c | 385 +++++++++++++++++++-
arch/blackfin/cpu/initcode.h | 52 +++
arch/blackfin/cpu/reset.c | 6 +
arch/blackfin/cpu/serial.c | 81 +++--
arch/blackfin/cpu/serial.h | 222 +-----------
arch/blackfin/cpu/serial1.h | 348 ++++++++++++++++++
arch/blackfin/cpu/serial4.h | 161 ++++++++
arch/blackfin/cpu/start.S | 2 +
arch/blackfin/include/asm/blackfin_cdef.h | 3 +
arch/blackfin/include/asm/blackfin_def.h | 5 +
arch/blackfin/include/asm/blackfin_local.h | 3 +
arch/blackfin/include/asm/config-pre.h | 4 +
arch/blackfin/include/asm/cplb.h | 31 ++-
arch/blackfin/include/asm/dma.h | 81 +++--
arch/blackfin/include/asm/gpio.h | 2 +-
arch/blackfin/include/asm/mach-bf533/BF531_def.h | 1 +
arch/blackfin/include/asm/mach-bf561/BF561_def.h | 1 +
arch/blackfin/include/asm/mach-bf609/BF609_cdef.h | 192 ++++++++++
arch/blackfin/include/asm/mach-bf609/BF609_def.h | 241 ++++++++++++
arch/blackfin/include/asm/mach-bf609/anomaly.h | 97 +++++
arch/blackfin/include/asm/mach-bf609/def_local.h | 5 +
arch/blackfin/include/asm/mach-bf609/gpio.h | 151 ++++++++
arch/blackfin/include/asm/mach-bf609/portmux.h | 257 +++++++++++++
arch/blackfin/include/asm/mach-bf609/ports.h | 103 ++++++
arch/blackfin/include/asm/mach-common/bits/cgu.h | 80 ++++
arch/blackfin/include/asm/mach-common/bits/dde.h | 88 +++++
arch/blackfin/include/asm/mach-common/bits/dma.h | 54 +++-
arch/blackfin/include/asm/mach-common/bits/mpu.h | 6 +-
arch/blackfin/include/asm/mach-common/bits/pll.h | 5 +
arch/blackfin/include/asm/mach-common/bits/sdh.h | 38 ++-
.../blackfin/include/asm/mach-common/bits/spi6xx.h | 240 ++++++++++++
arch/blackfin/include/asm/mach-common/bits/uart4.h | 66 ++++
arch/blackfin/lib/board.c | 25 ++-
arch/blackfin/lib/clocks.c | 112 +++++-
arch/blackfin/lib/string.c | 97 +++---
board/bf609-ezkit/Makefile | 55 +++
board/bf609-ezkit/bf609-ezkit.c | 67 ++++
boards.cfg | 1 +
common/cmd_reginfo.c | 19 +-
drivers/mmc/bfin_sdh.c | 68 +++-
drivers/spi/Makefile | 1 +
drivers/spi/bfin_spi6xx.c | 308 ++++++++++++++++
include/configs/bf609-ezkit.h | 162 ++++++++
include/configs/bfin_adi_common.h | 12 +-
47 files changed, 3585 insertions(+), 396 deletions(-)
create mode 100644 arch/blackfin/cpu/serial1.h
create mode 100644 arch/blackfin/cpu/serial4.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_cdef.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/BF609_def.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/anomaly.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/def_local.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/gpio.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/portmux.h
create mode 100644 arch/blackfin/include/asm/mach-bf609/ports.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/cgu.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/dde.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/spi6xx.h
create mode 100644 arch/blackfin/include/asm/mach-common/bits/uart4.h
create mode 100644 board/bf609-ezkit/Makefile
create mode 100644 board/bf609-ezkit/bf609-ezkit.c
create mode 100644 drivers/spi/bfin_spi6xx.c
create mode 100644 include/configs/bf609-ezkit.h
next reply other threads:[~2013-02-20 8:50 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-20 8:50 Sonic Zhang [this message]
2013-02-20 8:50 ` [U-Boot] [PATCH v3 01/11] Blackfin: bf60x: new processor header files Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 02/11] Blackfin: bf60x: Port blackfin core architecture code to boot on bf60x Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 03/11] Blackfin: bf60x: add serial support Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 04/11] Blackfin: bf60x: add dma support Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 05/11] Blackfin: bf60x: support big cplb page Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 06/11] Blackfin: bf60x: add gpio support Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 07/11] blackfin: bf609: add board and headers files to support bf609 Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 08/11] Blackfin: bf60x: add rsi/sdh support Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 09/11] Blackfin: spi: add bf6xx spi driver Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 10/11] Blackfin: bf60x: add hw watchdog support Sonic Zhang
2013-02-20 8:50 ` [U-Boot] [PATCH v3 11/11] Blackfin: bf60x: add resume from hibernate Sonic Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361350217-7592-1-git-send-email-sonic.adi@gmail.com \
--to=sonic.adi@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox