From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v7 0/4] Tegra: MMC: Add DT support for MMC to T20 boards
Date: Thu, 21 Feb 2013 15:31:26 -0700 [thread overview]
Message-ID: <1361485890-25121-1-git-send-email-twarren@nvidia.com> (raw)
This patchset adds device-tree support to the Tegra MMC driver.
All device config is done via properties in the DT files instead
of hard-coded config options/function arguments.
I've tested this on my Seaboard and everything works fine,
including card detect. For the other T20 boards, I've used
the Linux kernel DTS files for the sdhci nodes where there
wasn't one already, or expanded the info that was already
there. Everything builds fine, but I haven't tested anything
but Seaboard.
v2: Changes as per Stephen's & Simon's review
v3: Changes as per Stephen/Lucas/Thierry/Simon's feedback
v4: Additional changes as per Stephen/Lucas/Thierry/Simon
v5: Additional changes as per Stephen/Lucas/Andy
v6: Additional changes requested by Stephen/Thierry
v7: Additional changes requested by Stephen
Tom Warren (4):
Tegra: fdt: Change /include/ to #include for C preprocessor
Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux
Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files
Tegra: MMC: Add DT support to MMC driver for all T20 boards
arch/arm/dts/tegra114.dtsi | 2 +-
arch/arm/dts/tegra20.dtsi | 18 +-
arch/arm/dts/tegra30.dtsi | 2 +-
arch/arm/include/asm/arch-tegra/mmc.h | 2 +-
arch/arm/include/asm/arch-tegra/tegra_mmc.h | 13 +-
board/avionic-design/common/tamonten.c | 19 +-
board/avionic-design/dts/tegra20-medcom-wide.dts | 3 +-
board/avionic-design/dts/tegra20-plutux.dts | 3 +-
board/avionic-design/dts/tegra20-tamonten.dtsi | 489 +++++++++++++++++++++
board/avionic-design/dts/tegra20-tec.dts | 3 +-
board/compal/dts/tegra20-paz00.dts | 21 +-
board/compal/paz00/paz00.c | 26 +-
board/compulab/dts/tegra20-trimslice.dts | 16 +-
board/compulab/trimslice/trimslice.c | 23 +-
board/nvidia/common/board.c | 25 +
board/nvidia/dts/tegra114-dalmore.dts | 2 +-
board/nvidia/dts/tegra20-harmony.dts | 20 +-
board/nvidia/dts/tegra20-seaboard.dts | 14 +-
board/nvidia/dts/tegra20-ventana.dts | 17 +-
board/nvidia/dts/tegra20-whistler.dts | 15 +-
board/nvidia/dts/tegra30-cardhu.dts | 2 +-
board/nvidia/harmony/harmony.c | 26 +-
board/nvidia/seaboard/seaboard.c | 25 +-
board/nvidia/whistler/whistler.c | 30 +-
board/toradex/colibri_t20_iris/colibri_t20_iris.c | 11 +-
board/toradex/dts/tegra20-colibri_t20_iris.dts | 9 +-
drivers/mmc/tegra_mmc.c | 179 +++++---
dts/Makefile | 3 +-
include/fdtdec.h | 1 +
lib/fdtdec.c | 1 +
30 files changed, 786 insertions(+), 234 deletions(-)
create mode 100644 board/avionic-design/dts/tegra20-tamonten.dtsi
next reply other threads:[~2013-02-21 22:31 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-21 22:31 Tom Warren [this message]
2013-02-21 22:31 ` [U-Boot] [PATCH v7 1/4] Tegra: fdt: Change /include/ to #include for C preprocessor Tom Warren
2013-02-21 22:31 ` [U-Boot] [PATCH v7 2/4] Tegra: fdt: tamonten: Add common tamonten.dtsi file from linux Tom Warren
2013-02-21 22:31 ` [U-Boot] [PATCH v7 3/4] Tegra: fdt: Add/enhance sdhci (mmc) nodes for all T20 DT files Tom Warren
2013-02-21 22:31 ` [U-Boot] [PATCH v7 4/4] Tegra: MMC: Add DT support to MMC driver for all T20 boards Tom Warren
2013-02-21 23:38 ` [U-Boot] [PATCH v7 0/4] Tegra: MMC: Add DT support for MMC to " Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1361485890-25121-1-git-send-email-twarren@nvidia.com \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox