From mboxrd@z Thu Jan 1 00:00:00 1970 From: Scott Wood Date: Tue, 26 Feb 2013 12:22:54 -0600 Subject: [U-Boot] [PATCH 1/2] mtd: nand: Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT In-Reply-To: <1361902622-26774-1-git-send-email-fabio.estevam@freescale.com> (from fabio.estevam@freescale.com on Tue Feb 26 12:17:01 2013) References: <1361902622-26774-1-git-send-email-fabio.estevam@freescale.com> Message-ID: <1361902974.12570.0@snotra> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 02/26/2013 12:17:01 PM, Fabio Estevam wrote: > Introduce CONFIG_SYS_NAND_BUSWIDTH_16BIT option so that any NAND > controller > driver could use it when a 16-bit NAND is deployed. > > drivers/mtd/nand/ndfc has CONFIG_SYS_NDFC_16BIT, so just rename it, > so that > other NAND drivers could reuse the same symbol. > > Signed-off-by: Fabio Estevam > --- > README | 6 +++--- > drivers/mtd/nand/ndfc.c | 4 ++-- > 2 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/README b/README > index d8cb394..1e265c9 100644 > --- a/README > +++ b/README > @@ -3713,9 +3713,9 @@ Low Level (hardware related) configuration > options: > - CONFIG_SYS_SRIOn_MEM_SIZE: > Size of SRIO port 'n' memory region > > -- CONFIG_SYS_NDFC_16 > - Defined to tell the NDFC that the NAND chip is using a > - 16 bit bus. > +- CONFIG_SYS_NAND_BUSWIDTH_16BIT > + Defined to tell the NAND controller that the NAND chip > is using > + a 16 bit bus. Mention here that not all drivers use this symbol, and provide a list of those that do. E.g. on fsl_ifc, we already have this information elsewhere on a per-chip basis. -Scott