From: Tom Warren <twarren.nvidia@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/4] Tegra114: MMC: Add MMC driver for T114/Dalmore
Date: Mon, 18 Mar 2013 16:25:32 -0700 [thread overview]
Message-ID: <1363649136-23155-1-git-send-email-twarren@nvidia.com> (raw)
This patchset adds SDMMC device-tree support to the Tegra114 dts files,
and enables the Tegra MMC driver on Tegra114 Dalmore.
Tested on my Dalmore E1611 board, eMMC and SD-Card work fine, can load
a kernel off of a SD card OK, card detect works, and the env is now
stored in eMMC (end of the 2nd 'boot' sector, same as Tegra20/30).
Changes in v2:
- Remove SDIOCFG_HSM define, unused
- Remove I2C retries
- Change CONFIG_ENV_OFFSET to match Dalmore's eMMC chip boot part size
Tom Warren (4):
Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for
now)
Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table
Tegra114: MMC: Add SD bus power-rail init routine
Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore
boards
arch/arm/dts/tegra114.dtsi | 32 ++++++++++++
arch/arm/include/asm/arch-tegra114/gp_padctrl.h | 6 +++
board/nvidia/dalmore/dalmore.c | 67 +++++++++++++++++++++++++
board/nvidia/dalmore/pinmux-config-dalmore.h | 6 +++
board/nvidia/dts/tegra114-dalmore.dts | 13 +++++
include/configs/dalmore.h | 12 ++++-
6 files changed, 135 insertions(+), 1 deletion(-)
--
1.8.1.5
next reply other threads:[~2013-03-18 23:25 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-18 23:25 Tom Warren [this message]
2013-03-18 23:25 ` [U-Boot] [PATCH v2 1/4] Tegra114: fdt: Add SDMMC (sdhci) nodes for T114 boards (Dalmore for now) Tom Warren
2013-03-18 23:25 ` [U-Boot] [PATCH v2 2/4] Tegra114: Dalmore: Add SDIO3 pad config to pinctrl_config table Tom Warren
2013-03-18 23:25 ` [U-Boot] [PATCH v2 3/4] Tegra114: MMC: Add SD bus power-rail init routine Tom Warren
2013-03-18 23:25 ` [U-Boot] [PATCH v2 4/4] Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards Tom Warren
2013-03-19 18:32 ` Stephen Warren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363649136-23155-1-git-send-email-twarren@nvidia.com \
--to=twarren.nvidia@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox