From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 10/23] T4/SerDes: correct the SATA index
Date: Fri, 22 Mar 2013 10:15:18 -0700 [thread overview]
Message-ID: <1363972531-25641-10-git-send-email-yorksun@freescale.com> (raw)
In-Reply-To: <1363972531-25641-1-git-send-email-yorksun@freescale.com>
From: Roy Zang <tie-fei.zang@freescale.com>
Lane H on SerDes4 should be SATA2 instead of SATA1
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
---
arch/powerpc/cpu/mpc85xx/t4240_serdes.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
index 102defa..8aa2fd0 100644
--- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -180,8 +180,8 @@ static struct serdes_config serdes4_cfg_tbl[] = {
{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
{6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
{8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
- {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
- {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+ {10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA2}},
+ {12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA2}},
{14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
{16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
--
1.7.9.5
next prev parent reply other threads:[~2013-03-22 17:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 17:15 [U-Boot] [PATCH 01/23] B4860: Corrected FMAN1 operating frequency print at u-boot York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 02/23] Add definitions for HDBCR registers York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 03/23] powerpc/pcie: add PCIe version 3.x support York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 04/23] powerpc/mpc85xx: Update corenet global utility block registers York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 05/23] powerpc/t4240qds: Fix SPI flash type York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 06/23] e6500: Move L1 enablement after L2 enablement York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 07/23] T4/serdes: fix the serdes clock frequency display York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 08/23] powerpc/t4240qds: fix XAUI card PHY address York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 09/23] Fman/t4240: some fix for 10G XAUI York Sun
2013-03-22 20:48 ` Wolfgang Denk
2013-03-22 17:15 ` York Sun [this message]
2013-03-22 20:49 ` [U-Boot] [PATCH 10/23] T4/SerDes: correct the SATA index Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 11/23] powerpc/t4240qds: Update DDR timing table York Sun
2013-03-22 20:50 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 12/23] powerpc/mpc8xxx: Fix DDR 3-way interleaving York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 13/23] powerpc/mpc85xx: Fix portal setup York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 14/23] powerpc/t4240qds: Add voltage ID support York Sun
2013-03-22 20:50 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 15/23] T4/USB: Add USB 2.0 UTMI dual phy support York Sun
2013-03-22 20:51 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 16/23] T4/serdes: fix the actual serdes clock frequency York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 17/23] powerpc/85xx: add missing QMAN frequency calculation York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 18/23] powerpc/corenet2: Print SerDes protocol in decimal York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 19/23] powerpc/mpc85xx: Fix PIR parsing for chassis2 York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 20/23] powerpc/t4240: Fix SerDes protocol arrays with const prefix York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 21/23] powerpc/mpc85xx: Add T4160 SoC York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 22/23] powerpc/t4240qds: Move SoC define into boards.cfg York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 23/23] powerpc: Add T4160QDS York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363972531-25641-10-git-send-email-yorksun@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox