From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 23/23] powerpc: Add T4160QDS
Date: Fri, 22 Mar 2013 10:15:31 -0700 [thread overview]
Message-ID: <1363972531-25641-23-git-send-email-yorksun@freescale.com> (raw)
In-Reply-To: <1363972531-25641-1-git-send-email-yorksun@freescale.com>
T4160QDS shares the same platform as T4240QDS. T4160 is a low power
version of T4240, with eight e6500 cores, two DDR3 controllers, and
slightly different SerDes protocols.
Signed-off-by: York Sun <yorksun@freescale.com>
---
boards.cfg | 3 +++
include/configs/t4qds.h | 15 ++++++++++++++-
2 files changed, 17 insertions(+), 1 deletion(-)
diff --git a/boards.cfg b/boards.cfg
index 9d458e6..024a29e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -887,6 +887,9 @@ stxssa_4M powerpc mpc85xx stxssa stx
T4240QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240
T4240QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
T4240QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
+T4160QDS powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160
+T4160QDS_SDCARD powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4160QDS_SPIFLASH powerpc mpc85xx t4qds freescale - T4240QDS:PPC_T4160,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
B4860QDS powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860
B4860QDS_NAND powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,NAND,SYS_TEXT_BASE=0xFFF80000
B4860QDS_SPIFLASH powerpc mpc85xx b4860qds freescale - B4860QDS:PPC_B4860,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index dbaa7ea..a8346f0 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -791,8 +791,21 @@ unsigned long get_board_ddr_clk(void);
#define __USB_PHY_TYPE utmi
+/*
+ * T4240 has 3 DDR controllers. Default to 3way_4KB interleaving. It can be
+ * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to
+ * cacheline interleaving. It can be cacheline, page, bank, superbank.
+ * See doc/README.fsl-ddr for details.
+ */
+#ifdef CONFIG_PPC_T4240
+#define CTRL_INTLV_PREFERED 3way_4KB
+#else
+#define CTRL_INTLV_PREFERED cacheline
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "hwconfig=fsl_ddr:ctlr_intlv=3way_4KB," \
+ "hwconfig=fsl_ddr:" \
+ "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \
"bank_intlv=auto;" \
"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
"netdev=eth0\0" \
--
1.7.9.5
prev parent reply other threads:[~2013-03-22 17:15 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 17:15 [U-Boot] [PATCH 01/23] B4860: Corrected FMAN1 operating frequency print at u-boot York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 02/23] Add definitions for HDBCR registers York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 03/23] powerpc/pcie: add PCIe version 3.x support York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 04/23] powerpc/mpc85xx: Update corenet global utility block registers York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 05/23] powerpc/t4240qds: Fix SPI flash type York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 06/23] e6500: Move L1 enablement after L2 enablement York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 07/23] T4/serdes: fix the serdes clock frequency display York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 08/23] powerpc/t4240qds: fix XAUI card PHY address York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 09/23] Fman/t4240: some fix for 10G XAUI York Sun
2013-03-22 20:48 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 10/23] T4/SerDes: correct the SATA index York Sun
2013-03-22 20:49 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 11/23] powerpc/t4240qds: Update DDR timing table York Sun
2013-03-22 20:50 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 12/23] powerpc/mpc8xxx: Fix DDR 3-way interleaving York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 13/23] powerpc/mpc85xx: Fix portal setup York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 14/23] powerpc/t4240qds: Add voltage ID support York Sun
2013-03-22 20:50 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 15/23] T4/USB: Add USB 2.0 UTMI dual phy support York Sun
2013-03-22 20:51 ` Wolfgang Denk
2013-03-22 17:15 ` [U-Boot] [PATCH 16/23] T4/serdes: fix the actual serdes clock frequency York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 17/23] powerpc/85xx: add missing QMAN frequency calculation York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 18/23] powerpc/corenet2: Print SerDes protocol in decimal York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 19/23] powerpc/mpc85xx: Fix PIR parsing for chassis2 York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 20/23] powerpc/t4240: Fix SerDes protocol arrays with const prefix York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 21/23] powerpc/mpc85xx: Add T4160 SoC York Sun
2013-03-22 17:15 ` [U-Boot] [PATCH 22/23] powerpc/t4240qds: Move SoC define into boards.cfg York Sun
2013-03-22 17:15 ` York Sun [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363972531-25641-23-git-send-email-yorksun@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox