[U-Boot] [PATCH 13/31] powerpc/qixis: add clock measurement registers

[York Sun <yorksun@freescale.com>]

From: Ed Swarthout <Ed.Swarthout@freescale.com>

QIXIS includes frequency measurement functions for each major processor
clock input. After reset (and after clocks are stable), QIXIS measures
the clocks against a reference frequency and stores the results in
CLK_FREQ registers. A base register supplies a multiplier which allows
directly obtaining the measured value, without requiring knowledge of
the target system or QIXIS core frequency.

Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
---
 board/freescale/common/qixis.h |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 8d914d5..2cf8738 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -78,7 +78,11 @@ struct qixis {
 	u8 trig_stat;
 	u8 res12[3];
 	u8 trig_ctr[4];
-	u8 res13[48];
+	u8 res13[16];
+	u8 clk_freq[6];	/* Clock Measurement Registers */
+	u8 res_c6[8];
+	u8 clk_base[2];	/* Clock Frequency Base Reg */
+	u8 res_d0[16];
 	u8 aux2[4];	/* Auxiliary Registers,0xE0 */
 	u8 res14[10];
 	u8 aux_ad;
-- 
1.7.9.5