From: York Sun <yorksun@freescale.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 06/31] T4240/ramboot: enable PBL tool for T4240
Date: Fri, 22 Mar 2013 10:29:04 -0700 [thread overview]
Message-ID: <1363973369-26110-6-git-send-email-yorksun@freescale.com> (raw)
In-Reply-To: <1363973369-26110-1-git-send-email-yorksun@freescale.com>
From: Shaohui Xie <Shaohui.Xie@freescale.com>
Added a default RCW(1_28_6_12) and PBI configure file for T4240, so it can use
PBL tool to produce the ramboot image.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
---
board/freescale/t4qds/t4_pbi.cfg | 36 ++++++++++++++++++++++++++++++++++++
board/freescale/t4qds/t4_rcw.cfg | 7 +++++++
include/configs/t4qds.h | 2 ++
3 files changed, 45 insertions(+)
create mode 100644 board/freescale/t4qds/t4_pbi.cfg
create mode 100644 board/freescale/t4qds/t4_rcw.cfg
diff --git a/board/freescale/t4qds/t4_pbi.cfg b/board/freescale/t4qds/t4_pbi.cfg
new file mode 100644
index 0000000..c598fb5
--- /dev/null
+++ b/board/freescale/t4qds/t4_pbi.cfg
@@ -0,0 +1,36 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+#enable CPC1
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#workaround for IFC bus speed
+091241c0 f03f3f3f
+091241c4 ff003f3f
+09124010 00000101
+09124130 0000000c
+#workaround for SERDES A-006031
+090ea000 064740e6
+090ea020 064740e6
+090eb000 064740e6
+090eb020 064740e6
+090ec000 064740e6
+090ec020 064740e6
+090ed000 064740e6
+090ed020 064740e6
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
diff --git a/board/freescale/t4qds/t4_rcw.cfg b/board/freescale/t4qds/t4_rcw.cfg
new file mode 100644
index 0000000..6ac95ff
--- /dev/null
+++ b/board/freescale/t4qds/t4_rcw.cfg
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+#serdes protocol 1_28_6_12
+14180019 0c101916 00000000 00000000
+04383060 30548c00 6c020000 19000000
+00000000 ee0000ee 00000000 000187fc
+00000000 00000000 00000000 00000018
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
index b5462b7..943bf67 100644
--- a/include/configs/t4qds.h
+++ b/include/configs/t4qds.h
@@ -29,6 +29,8 @@
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/t4qds/t4_rcw.cfg
#endif
#define CONFIG_CMD_REGINFO
--
1.7.9.5
next prev parent reply other threads:[~2013-03-22 17:29 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 17:28 [U-Boot] [PATCH 01/31] 83xx/pcie: fix build error for 83xx pcie York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 02/31] Enable L2 cache parity/ECC error checking York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 03/31] net/phy: fix select line for TN80xx York Sun
2013-03-22 20:59 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 04/31] powerpc/mpc85xx: check if core is disabled for showing status York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 05/31] powerpc/t4240qds: Add VDD override York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` York Sun [this message]
2013-03-22 17:29 ` [U-Boot] [PATCH 07/31] Add e6500 L2 replacement policy selection York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 08/31] powerpc/p5040: enable NAND, SD, SPI boot support York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 09/31] powerpc/T4160: Merge T4160 and T4240 in config_mpc85xx.h York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 10/31] powerpc/mpc8xxx: Add T1040 and variant SoCs York Sun
2013-03-22 21:00 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 11/31] powerpc/chassis2: Change core numbering scheme York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 12/31] powerpc/mpc8xxx: Allow DDR overclock York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 13/31] powerpc/qixis: add clock measurement registers York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 14/31] powerpc/t4qds: use clock measurement for sysclk and ddr clock York Sun
2013-03-22 21:01 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 15/31] powerpc/p5040: enable PBL tool support York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 16/31] board/t4240qds, b4860qds: LAW/TLB for DCSR set to size 32M York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 17/31] Enable XAUI interface for B4860QDS York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 18/31] powerpc/t4qds: Add SW7[4] in the DIP switch display York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 19/31] powerpc/t4qds: Enable master module for Boot from SRIO and PCIE York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 20/31] powerpc/t4qds: Slave module for boot " York Sun
2013-03-22 21:02 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 21/31] powerpc/t4240qds: fix PHY reset timeout issue York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 22/31] powerpc/doc: Fix the misalignment of document README.srio-pcie-boot-corenet York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 23/31] powerpc/b4860: fix for Serdes connectivity to SFP's York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 24/31] powerpc/mpc85xx: add setting of clock-frequency for mpic node York Sun
2013-03-22 21:03 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 25/31] powerpc/p2041: fix serdes reference clock frequency display for PC board York Sun
2013-03-22 21:03 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 26/31] sf: spansion: Add support for S25FL128S York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 27/31] powerpc/B4: Merge B4420 and B4860 in config_mpc85xx.h York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 28/31] powerpc/p5040: fix mdio mux for 10G port York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 29/31] powerpc/usb: Fix usb device-tree fix-up York Sun
2013-03-22 21:04 ` Wolfgang Denk
2013-03-22 17:29 ` [U-Boot] [PATCH 30/31] fman/mEMAC: set SETSP bit in IF_MODE regisgter for RGMII speed York Sun
2013-03-22 17:29 ` [U-Boot] [PATCH 31/31] powerpc/b4860qds: Add LAW Target ID and Create LAW entry for Maple York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363973369-26110-6-git-send-email-yorksun@freescale.com \
--to=yorksun@freescale.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox